Sears C944.414460 Stopping Your Engine, ON/STOP Switch Starting Position, Starting a Warm Engine

Page 9

Never use engine or carburetor clean- er products in the fuel tank or perma- nent damage may occur.

See the STORAGE section for addition- al information.

CHAIN BRAKE

Ensure chain brake is disengaged by pulling the front hand guard back to- ward the front handle as far as pos- sible. The chain brake must be disen- gaged before cutting with the saw.

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle

speed refer to CARBURETOR ADJUST-

MENT within this manual. Avoid con- tact with the muffler. A hot muffler can cause serious burns.

STOPPING YOUR ENGINE

SMove ON/STOP switch to the STOP position.

ON/STOP SWITCH

STARTING POSITION

STo start the engine, hold the saw firmly on the ground as illustrated. Make sure the chain is free to turn without contacting any object.

Starter Rope Handle

Left Hand on Front Handle

Right Foot Through Rear Handle

Important points to remember When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope rewind slowly.

For cold weather starting, start the unit at FULL CHOKE; allow the engine to warm up before squeezing the throttle trigger.

NOTE: DO NOT cut material with the choke/fast idle lever at the FULL CHOKE position.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

NOTE: In the following steps, when the choke/fast idle lever is pulled out to the full extent, the correct throttle set- ting for starting is set automatically.

1.Move ON/STOP switch to ON posi- tion.

2.Pull choke/fast idle lever out to the full extent.

3.Pull the starter rope quickly with your right hand a maximum of 10 times.

NOTE: The engine may sound as if it is trying to start before the 10th pull; if so, proceed to the next step.

4.Push the choke/fast idle lever in completely (to the OFF CHOKE position).

5.Pull the starter rope quickly with your right hand until the engine starts.

6.Allow the engine to run for approxi- mately 5 seconds. Then, squeeze and release throttle trigger to allow engine to return to idle speed.

CHOKE/FAST IDLE LEVER

FULL OFF

STARTING A WARM ENGINE

1.Move ON/STOP switch to ON posi- tion.

2.Pull the choke/fast idle lever out to the full extent, then push the lever back in completely (to the OFF CHOKE position). This will set the fast idle lock to the start position.

3.Pull the starter rope quickly with your right hand until the engine starts.

4.Squeeze and release throttle trig- ger to allow engine to return to idle speed.

DIFFICULT STARTING (or starting a flooded engine)

The engine may be flooded if it has not started after 10 pulls.

Flooded engines can be cleared of ex- cess fuel by following the warm engine starting procedure listed above. Insure the ON/STOP switch is in the ON position.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Gasoline Chain SAW Sears Canada, Inc., Toronto, Ontario M5B 2B8 Limited ONE 1 Year Warranty for Craftsmanr GAS Chain SAWPlan Ahead Operate Your SAW SafelyMaintain Your SAW in Good Working Order Handle Fuel with Caution Guard Against KickbackReduce the Chance Kickback Avoid Pinch-Kickback Kickback Safety FeaturesAvoid Pull-In Maintain ControlSpecial Notice Your saw is Chain Brake & CKA AngleCarton Contents AssemblyKnow Your SAW Throttle Trigger ON/STOP Switch Chain BrakeThrottle LOCK--OUT Chain TensionStopping Your Engine ON/STOP Switch Starting PositionStarting a Warm Engine Difficult Starting or starting a flooded engineInertia activating function control Braking function controlOperating Tips Tree Felling TechniquesFelling Large Trees Notch CUT and Felling TreeCutting a Fallen Tree Bucking Important Points Bucking Using a LOG or Support StandBucking Techniques Bucking Without a SupportLimbing Limbing and Pruning Important PointsPruning All the way through the limbGeneral Recommendations Customer ResponsibilitiesCheck for Loose Fasteners and PartsCheck Chain Sharpness Check Guide BARCheck Fuel Mixture Level Clean AIR Filter Inspect and Clean Unit and DecalsCleaning the Spark Arresting Screen LubricationReplace Spark Plug Chain ReplacementReplace Fuel Filter Chain SharpeningChain Adjustment Carburetor AdjustmentIdle Speed--T Fuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Trouble Cause Remedy Troubleshooting TableWhere to GET Warranty SER Control Warranty Parts List NANCE, Replacement and REPair of Emission Related

C944.414460 specifications

The Sears C944.414460 is a notable vessel that stands out in the realm of innovative maritime technology. Its design and performance characteristics are geared toward enhancing both efficiency and user experience. One of the main features of the C944.414460 is its robust hull design, which offers exceptional stability and maneuverability, making it suitable for a variety of nautical applications. The vessel's construction incorporates advanced composite materials that not only reduce weight but also improve durability, ensuring a longer lifespan even in harsh marine conditions.

Equipped with a state-of-the-art propulsion system, the C944.414460 utilizes a hybrid engine that combines traditional fuel technology with electric power, allowing for enhanced fuel efficiency and reduced emissions. This eco-friendly approach aligns with modern environmental standards and appeals to a growing market of environmentally conscious consumers. The result is a vessel that performs exceptionally well while minimizing its ecological footprint.

In terms of onboard technology, the C944.414460 features an intuitive navigation system that integrates GPS, radar, and sonar capabilities to provide real-time data and analytics. This system enhances safety and situational awareness, making it easier for operators to make informed decisions while at sea. Additionally, the inclusion of advanced communication equipment ensures seamless connectivity, allowing for constant monitoring and support from shore-based services.

The interior space of the C944.414460 is designed with comfort and functionality in mind. Thoughtful layout and high-quality finishes contribute to an inviting atmosphere for both crew and passengers. The vessel also boasts generous storage solutions that maximize usability without compromising aesthetics. Advanced climate control systems ensure a pleasant environment, regardless of external weather conditions.

Safety is paramount in the design of the C944.414460, which is equipped with multiple redundancy systems to mitigate potential risks. These safety features include advanced fire suppression systems and emergency backup power supplies, ensuring that the vessel maintains its operational integrity under various circumstances.

In summary, the Sears C944.414460 exemplifies a harmonization of modern design and cutting-edge technology. Its main features, including a hybrid propulsion system, advanced navigation equipment, and safety redundancies, combine to create a vessel that not only meets but exceeds contemporary maritime standards. With a focus on efficiency, comfort, and sustainability, the C944.414460 is a significant innovation in the boating industry.
Top Page Image Contents