Sears C944.414460 ON/STOP Switch Chain Brake, Throttle Trigger, Throttle LOCK--OUT, Chain Tension

Page 8

ON/STOP SWITCH

CHAIN BRAKE

The ON/STOP SWITCH is used to stop

The CHAIN BRAKE is a device de-

the engine.

signed to stop the chain if kickback oc-

 

curs. The chain brake activates auto-

THROTTLE TRIGGER

matically in the event of kickback. The

chain brake activates manually if the

The THROTTLE TRIGGER controls en-

gine speed.

front hand guard is pushed forward.

 

The chain brake is disengaged by pull-

THROTTLE LOCK--OUT

ing the front hand guard back toward

the front handle as far as possible.

The THROTTLE LOCK--OUT must be

 

 

pressed before you can squeeze the

CHAIN TENSION

throttle trigger. This feature prevents

It is normal for a new chain to stretch

you from accidentally squeezing the

during first 30 minutes of operation. You

trigger.

should check your chain tension fre-

 

CHOKE/FAST IDLE LEVER

quently. See CHAIN TENSION under the

SERVICE AND ADJUSTMENTS section.

The choke and fast idle are set by pull-

WARNING: Muffler is very hot

ing the CHOKE/FAST IDLE LEVER out

fully for cold or after refueling. The

during and after use. Do not touch the

choke provides additional fuel to the

muffler or allow combustible material

engine during cold starting.

such as dry grass or fuel to do so.

 

 

 

BEFORE STARTING ENGINE

line must be mixed with a good quality

WARNING: Be sure to read the

synthetic 2-cycle air-cooled engine oil.

We recommend Craftsman brand syn-

fuel handling information in the safety

thetic oil. Mix gasoline and oil at a ratio

rules section of this manual before you

of 40:1. A 40:1 ratio is obtained by mix-

begin. If you do not understand the

ing 3.2 ounces (95 ml) of oil with 1 gal-

fuel handling information do not at-

lon (4 litres) of unleaded gasoline. In-

tempt to fuel your unit. Seek help from

cluded with this saw is a 3.2 ounce (95

someone that does understand the in-

ml) container of Craftsman brand oil.

formation or contact your Sears Ser-

Pour the entire contents of this container

vice Centre.

into 1 gallon (4 litres) of gasoline to

GUIDE BAR AND CHAIN OIL

achieve the proper fuel mixture. DO NOT

The chain oiler provides continuous

USE automotive oil or marine oil. These

lubrication to the chain and guide bar.

oils will cause engine damage. When

Be sure to fill the bar oil tank when you

mixing fuel follow the instructions printed

fill the fuel tank (Capacity = 6.8 fl. oz.).

on the container. Once oil is added to

Lack of oil will quickly ruin the bar and

the gasoline, shake container momen-

chain. Too little oil will cause overheat-

tarily to assure that the fuel is thoroughly

ing shown by smoke coming from the

mixed. Always read and follow the safe-

chain and/or discoloration of the bar.

ty rules relating to fuel before fueling

For maximum guide bar and chain life,

your unit.

we recommend you use Craftsman

IMPORTANT

chain saw bar oil. If Craftsman bar oil

Experience indicates that alcohol

is not available, you may use a good

blended fuels (called gasohol or using

grade SAE 30 oil until you are able to

ethanol or methanol) can attract mois-

obtain Craftsman brand. The oil output

ture which leads to separation and

is automatically metered during opera-

formation of acids during storage.

tion. Your saw will use approximately

Acidic gas can damage the fuel sys-

one tank of bar oil for every tank of fuel

tem of an engine while in storage.

mix. Always fill the bar oil tank when

To avoid engine problems, the fuel

you fill the fuel tank.

system should be emptied before stor-

FUELING ENGINE

age for 30 days or longer. Drain the

WARNING: Remove fuel cap

gas tank, start the engine and let it run

until the fuel lines and carburetor are

slowly when refueling.

empty. Use fresh fuel next season.

This engine is certified to operate on un-

See STORAGE instructions for addition-

leaded gasoline. Before operation, gaso-

al information.

 

8

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Gasoline Chain SAW Limited ONE 1 Year Warranty for Craftsmanr GAS Chain SAW Sears Canada, Inc., Toronto, Ontario M5B 2B8Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Reduce the Chance Kickback Handle Fuel with CautionGuard Against Kickback Kickback Safety Features Avoid Pinch-KickbackAvoid Pull-In Maintain ControlChain Brake & CKA Angle Special Notice Your saw isKnow Your SAW Carton ContentsAssembly ON/STOP Switch Chain Brake Throttle TriggerThrottle LOCK--OUT Chain TensionON/STOP Switch Starting Position Stopping Your EngineStarting a Warm Engine Difficult Starting or starting a flooded engineBraking function control Inertia activating function controlOperating Tips Tree Felling TechniquesCutting a Fallen Tree Bucking Felling Large TreesNotch CUT and Felling Tree Bucking Using a LOG or Support Stand Important PointsBucking Techniques Bucking Without a SupportLimbing and Pruning Important Points LimbingPruning All the way through the limbCustomer Responsibilities General RecommendationsCheck for Loose Fasteners and PartsCheck Fuel Mixture Level Check Chain SharpnessCheck Guide BAR Inspect and Clean Unit and Decals Clean AIR FilterCleaning the Spark Arresting Screen LubricationChain Replacement Replace Spark PlugReplace Fuel Filter Chain SharpeningIdle Speed--T Chain AdjustmentCarburetor Adjustment Seasonal Storage Fuel SystemEngine OtherTroubleshooting Table Cause Remedy Troubleshooting Table Trouble Cause RemedyWhere to GET Warranty SER Pair of Emission Related Control Warranty Parts ListNANCE, Replacement and RE

C944.414460 specifications

The Sears C944.414460 is a notable vessel that stands out in the realm of innovative maritime technology. Its design and performance characteristics are geared toward enhancing both efficiency and user experience. One of the main features of the C944.414460 is its robust hull design, which offers exceptional stability and maneuverability, making it suitable for a variety of nautical applications. The vessel's construction incorporates advanced composite materials that not only reduce weight but also improve durability, ensuring a longer lifespan even in harsh marine conditions.

Equipped with a state-of-the-art propulsion system, the C944.414460 utilizes a hybrid engine that combines traditional fuel technology with electric power, allowing for enhanced fuel efficiency and reduced emissions. This eco-friendly approach aligns with modern environmental standards and appeals to a growing market of environmentally conscious consumers. The result is a vessel that performs exceptionally well while minimizing its ecological footprint.

In terms of onboard technology, the C944.414460 features an intuitive navigation system that integrates GPS, radar, and sonar capabilities to provide real-time data and analytics. This system enhances safety and situational awareness, making it easier for operators to make informed decisions while at sea. Additionally, the inclusion of advanced communication equipment ensures seamless connectivity, allowing for constant monitoring and support from shore-based services.

The interior space of the C944.414460 is designed with comfort and functionality in mind. Thoughtful layout and high-quality finishes contribute to an inviting atmosphere for both crew and passengers. The vessel also boasts generous storage solutions that maximize usability without compromising aesthetics. Advanced climate control systems ensure a pleasant environment, regardless of external weather conditions.

Safety is paramount in the design of the C944.414460, which is equipped with multiple redundancy systems to mitigate potential risks. These safety features include advanced fire suppression systems and emergency backup power supplies, ensuring that the vessel maintains its operational integrity under various circumstances.

In summary, the Sears C944.414460 exemplifies a harmonization of modern design and cutting-edge technology. Its main features, including a hybrid propulsion system, advanced navigation equipment, and safety redundancies, combine to create a vessel that not only meets but exceeds contemporary maritime standards. With a focus on efficiency, comfort, and sustainability, the C944.414460 is a significant innovation in the boating industry.
Top Page Image Contents