Sears 917.258552 owner manual To Level Mower Housing

Page 21

= 'n'

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See _'PRODUCTSPEC1F_CAT!ONS 'on page 3 of this manual).

if tires are over or unde rinflated, you will not properly adjust your mower.

SIDE_TO_SIDE ADJUSTMENT (See Figs. 20 and 21)

°Raise mower to its highest position.

At the midpoint of both sides of mowe r, measure heiRht from bottom edge of mowerto ground. Distance A'on both sides of mower shouid be the same or within 1/4" of each other.

If adjustment is necessary, make adjustment on one side of mower only.

To raise one side of mower, tighten lift link adjustment nut on that side.

TO lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

Recheck measurements after adjusting.

BOTTOM EDGE

BOTTOM EDGE

OF MOWER TO

OF MOWER TO

GROUND

GROUND

GROUND LINE

FIG. 20

SUSPENSION

ARM

LIFT LINK

ADJUSTMENT NUT

FIG, 21

FRONT*TO-BACK ADJUSTMENT (See Figs, 22 and 23)

mMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE, IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LIt}KS EQUALLY SO MOWER WtLL STAY LEVEL SIDE-TO-

SIDE.

To obtain the best cutting results, the mower housing shoutd be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

Check adjustment on right side of tractor. Measure dis- tance "D" directly in front and behind the mandrel at bottom edge of mower housing as shown.

,Before making any necessary adjustments, check that both front links are equal in length, Both links should be approximately 10-3/8".

tf links are not equal in length, adjust one link to same length as other link.

-To lower front of mower loosen nut "E" on both front

links an equal number of turns.

,When distance "D" is 1/8" to 1/2" lower at front than

rear, tighten nuts "F" against trunnion on both front links.

To raise front of mower, loosen nut"F" from tru nnion on both front links. Tighten nut "E" on both front links an equal number of turns.

,When distance "D" is 1/8" to t/2" lower at front than rear, tighten nut"F" against trunnion on both front links.

Recheck side-to-side adjustment.

MANDREL

RG. 22

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT "E"

NUT

FRONT LINKS

TRUNNION

21FroG.23

Image 21
Contents AFTZ II. Slope Operation Safety RulesLimited TWO Year Warranty on Craftsman Riding Equipment Maintenance AgreementLimited 90 DAY Warranty on Battery ModelIndex Performance EngineContents of Hardware Pack HOW to SET UP Your Tractor Tools Required for AssemblyASS LY To Remove Tractor from CartonInstall Seat See Fig AssemblyCheck Deck Levelness Assemble Gauge Wheels to Mower Deck See FigChecklis T To Convert to Bagging orDschargng Battery Reverse Forward SlowLock Know Your Tractor OperationHOW to USE Your Tractor To SET Parking Brake See FigStopping See Fig Before Startwng the Engine To Operate on HillsADD Gasoline 7ro Start Engine See Fig Purge TransmissionHydrostatic Transmission Warm UP Mulching Mowng Tips ERAT!ONChart Maintenance ScheduleGeneral Recommendations LUBRJCATmONTractor BatteryBrake Operation TiresEngine Transaxle Pump FluidTR Filter See Fig. t6 Cleaning MufflerSpark Plugs To iNSTALL Mower See Fig, !9 To Remove Mower See FigOFF To Level Mower Housing To Replace Mower Blade Drive Belt To Adjust Brake See FigTo Replace Motion Drive Belt See FigTo Adjust Motion Control Lever Service AN Adjustm NTSTo Adjust Steering Wheel Alignment Front Wheel TOE-INtCAMBERTo Start Engjne WiTH a Weak Battery See Fig Service a AdjustmentsTo Remove Hood and Grill Assembly To Replace Headlight BulbTo Adjust Throttle Control Cable To Adjust Carburetor See FigEngine Other StorageFuelsystem Engine OILProblemcause TroubleshootingPoints CorrectionClutch CorrectbonTractor = Model Number Electrical Tractor - Model NumberTractor Model Number KEYPart Description Chassis and Enclosures NO. no KEY PartRepair pARTSTRACTORtooELNUMBER97..258552 Drive DESCRePTONSTL Tractor -- Model Number Steering AssemblyKEY Part NO. no TRACTOR-- Model NumberTractor Model Number 917,258552 Seat AssemblyDescription KEY Part DescriptionTRACTOR--MODEL Wheels & TiresKEY Part NO. no Engine Optional Equipment NO. NO.DESCRiPTiON EngineMower Lift Tractor - Model Number 917,258552150 \ 426 161718KEY Part Tractor =- Model NumberNO. NO. DESCRIPTtON Locknut, HexMower Deck 105106 KEY Mower DeckPart DESCRmPTIONHydro Gear Transaxle Model Number Tractor == Model Number 917,258552NO. no Description Hydro Gear Transaxle Model Number 310=0650Retaining 142951Tractor Model Number Kohler Engine -- Model Number CV15S, Type Number PS-41526 Tractor - Model Number 917Crankshaft KEY Part Not Illustrated KEY PartTractor --MODEL Number 917,258552 Fuel System2227 Fuel System KEY Part NO. no Kohler Engine -MODEL Number CV15S, Type Number PB-41526Cylinder HEAD, Valve and Breather DescriponTractor = Model Number 917,258552 Kohler Engine Model Number CV15S Type Number PS-41526Startn Electrical Kohler Engine -- Model Number CV!5S, Type Number PS-41526Crankcase KEY Part Starting System KEY Part NO. noService Notes Suggested Guide for Sighting Slopes for Safe Operation For Repair SERVICE, Call this Toll Free Number Repair Service Or PartsIf YOU Need Orconsumer Assistance HOT LINE, Call this Toll Free Number

917.258552 specifications

The Sears 917.258552 is a standout model in the lineup of lawn tractors offered by Sears. This versatile machine combines robust features and innovative technologies to provide homeowners with an efficient and effective solution for lawn maintenance.

One of the main features of the Sears 917.258552 is its powerful engine. Powered by a reliable 18.5 horsepower Briggs & Stratton engine, this lawn tractor is capable of tackling various lawn sizes and types. The engine's performance is enhanced by a smooth automatic transmission, which allows for easy speed adjustments on the go, ensuring that users can navigate their yards with ease and precision.

The cutting deck of the Sears 917.258552 measures a generous 42 inches, making it suitable for larger areas without sacrificing maneuverability. The deck design incorporates a durable steel construction, providing longevity and resilience against the rigors of regular lawn care. Additionally, it features a deck wash system, allowing users to clean the underside of the deck efficiently and maintain optimal cutting performance over time.

Another noteworthy technology included in this model is the cutting height adjustment feature. The Sears 917.258552 provides multiple cutting height settings, which can be easily adjusted to achieve the desired grass height. This flexibility allows users to manage their lawns' aesthetics while promoting healthy grass growth.

The tractor's ergonomics are designed with user comfort in mind. The high-back seat provides ample support during extended periods of operation, while the easy-to-reach controls facilitate a hassle-free mowing experience. With a tight turning radius, the Sears 917.258552 can navigate around obstacles effectively, making it an ideal choice for complex landscapes.

Moreover, this tractor is designed for storage and maintenance convenience. It features a compact design that simplifies storage, while the intuitive layout allows for easy maintenance access to key components, such as the battery and fuel system.

In summary, the Sears 917.258552 lawn tractor is an exceptional choice for homeowners looking for a reliable and efficient lawn care solution. With its powerful engine, durable cutting deck, adjustable cutting heights, ergonomic design, and ease of maintenance, this model epitomizes the blend of performance and user-friendly features that Sears aims to deliver in their lawn maintenance products. Whether for residential lawns or larger garden plots, the Sears 917.258552 is equipped to handle the task with efficiency and ease.