Sears 316.2927 manual Maintenance And Storage

Page 4

operation. Stop machine if anyone enters the area.

5.Be careful when cultivating in hard ground. The tines may catch in the ground and propel the cultivator forward. If this occurs, let go of the handle and do not restrain the machine.

6.Never operate the machine at high transport speeds on hard or slippery surfaces.

7.Exercise caution to avoid slipping or falling.

8.Look down, behind, and use care when pulling machine towards you.

9.Start the engine according to the instructions found in this manual and keep feet well away from the tines at all times.

10.After striking a foreign object, stop the engine, disconnect the spark plug wire and ground against the engine. Thoroughly inspect the machine for any damage. Repair the damage before starting and operating.

11.Disengage all clutch and stop engine before you leave the operating position (behind the handle). Wait until the tines come to a complete stop before unclogging the tines, making any adjustments, or inspections.

12.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

13.Muffler and engine become hot and can cause a burn. Do not touch.

14.Use caution when cultivating near fences, buildings and underground utilities. Rotating tines can cause property damage or personal injury.

15.Do not overload machine capacity by attempting to cultivate soil to deep or to fast of a rate.

16.If the machine should start making an unusual noise or vibration, stop the engine, disconnect the spark plug wire and ground it against the engine. Inspect thoroughly for damage. Repair any damage before starting and operating.

17.Keep all shields, guards and safety devices in place and operating properly.

18.Never pick up or carry machine while the engine is running.

19.Use only attachments and accessories available by the Sears. Failure to do so, can result in personal injury.

20.If situations occur which are not covered in this manual, use care and good judgment. Contact your nearest Sears service center.

Maintenance And Storage

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the tines and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or over-speed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.Always store unit in cultivator mode (all four tines on unit) to avoid tip over.

10.If the fuel tank has to be drained, do this outdoors.

11.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

WARNING: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Cultivator / Edger Table of Contents WarrantySafety TrainingMaintenance And Storage Disconnecting Spark Plug Setting Up Your Cultivator / EdgerAssembly Removing Unit From CartonStopping Engine OperationGas Fill-Up Oil Fill-UpStarting Engine Using Your Cultivator Adjusting the Wheel Support BracketAttaching the Edger Wheel And Blade Starting a Warm EngineChecking Oil MaintenanceChanging Oil Air Filter Maintenance Carburetor AdjustmentSpark Arrestor Maintenance Replacing The Spark PlugIts travel. Make sure Tine Removal and Replacement Service and StorageStoring Your Cultivator / Edger EngineTroubleshooting Problem Cause RemedyParts List Part Description 5045 9570 Short Block 5-13, 15, 16, 71-83 Owner’s Warranty Responsibilities Emission Warranty StatementManufacturer’s Warranty Coverage Garantía ÍndiceEsta garantía no cubre Capacitación SeguridadFuncionamiento Mantenimiento y almacenamientoDeclaración de Garantía de Emisión California / la emisión de Ministerio DEL MedioLas responsabilidades De la garantía del Dueño Como La cobertura De la garantía del FabricanteConfiguración de su cultivadora / bordeadora Parties Lâches dans CartonDesconexión De La Bujía MontajeFuncionamiento Detención del motor Llenado de aceiteLlenado de nafta Encendido del motorAjuste de la ménsula de soporte de la rueda Utilización de su cultivadoraArranque de un motor en caliente Conexión de la rueda y de la cuchilla de la bordeadora Cambio de aceite MantenimientoMantenimiento del filtro de aire Ajuste del carburadorReemplazo de la bujía Mantenimiento del dispositivo contra chispasDespacho de aduana de Balancín 003-.006 .076-.152mm Servicio Y Almacenamiento Almacenamiento de la cultivadora / bordeadoraMotor Solución DE Problemas Problema Causa SoluciónPage Page Get it fixed, at your home or ours

316.2927 specifications

The Sears 316.2927 is a versatile electronic keyboard that gained popularity in the 1980s for its compact design and user-friendly features. This model epitomized a blend of affordability and functionality, making it an attractive choice for both novice musicians and those seeking a portable instrument.

One of the main features of the Sears 316.2927 is its 49-key layout. The keys are not full-sized, which contributes to the keyboard's lightweight nature and portability. This design allows users to play a range of musical styles while still being easy to transport from one location to another. The keyboard also includes a number of built-in sounds, allowing users to explore various instruments, including pianos, organs, and synthesizers. The variety of sounds can inspire creativity and provide a richer music-making experience.

The Sears 316.2927 incorporates several essential technologies that were innovative for its time. It includes an integrated rhythm section, which features a selection of percussion patterns that can enhance any performance. Users can choose from multiple styles, such as rock, jazz, and disco, offering a range of backgrounds for their music. This rhythm feature is coupled with adjustable tempo controls, allowing players to set their preferred speed and tailor the backing track to suit their needs.

In terms of characteristics, this model boasts a straightforward interface, with easily accessible buttons and knobs for sound selection, volume control, and rhythm settings. The LCD display provides essential feedback, guiding users through various functions and settings. The keyboard is powered by batteries or can be connected to a standard power outlet, making it versatile for both home use and on-the-go sessions.

Another notable characteristic of the Sears 316.2927 is its ability to connect to external audio devices. The inclusion of line-out and headphone jacks enables users to connect the keyboard to amplifiers or recording equipment, expanding its use in live performances and studio settings. This connectivity enhances the instrument's utility, allowing it to fit seamlessly into a variety of musical environments.

Overall, the Sears 316.2927 is a well-rounded electronic keyboard that balances portability, user-friendly features, and a range of sounds. Its combination of built-in rhythms, easy interface, and connectivity options makes it an excellent choice for budding musicians and seasoned players alike, providing a platform for creativity and musical exploration.
Top Page Image Contents