McCulloch 532 43 45-03, 96041017700 manual To Move Forward and Backward See Fig, To Operate Mower

Page 11

OPERATION

TO MOVE FORWARD AND BACKWARD (See Fig. 8)

The direction and speed of movement is controlled by the gearshift lever (J).

J

Fig. 8

1.Start tractor with clutch/brake pedal depressed and gearshift lever in neutral position.

2.Move gearshift lever to desired position.

3.Slowly release clutch/brake pedal to start movement.

IMPORTANT: Bring tractor to a complete stop before shifting or changing gears. Failure to do so will shorten the useful life of your transaxle.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 9)

The position of the attachment lift lever (A) determines the cutting height.

A

Fig. 9

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitat- ing or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut (see "TO ADJUST MOWER CUTTING HEIGHT")

•Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES

•Disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield

(S) in place (See Fig. 10).

S

Fig. 10

REVERSE OPERATION SYSTEM (ROS) (See Fig. 11)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents M13538 II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Steering Wheel Unassembled PartsBefore Removing Tractor from Skid AssemblyTools Required for Assembly ToremovetractorfromcartonCheck Brake System Install Seat See FigOperation Know Your Tractor Stopping See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged To SET Parking Brake See FigTo Stop Mower Blades To Adjust Mower Cutting Height See FigTo Move Forward and Backward See Fig To Operate MowerBefore Starting the Engine To Start Engine See Fig Mowing TipsSchedule MaintenanceMaintenance General RecommendationsBlade Removal See Fig BatteryTractor Blade CareEngine Deck Washout Port See Fig CleaningEngine Cooling System See Fig To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Install belt on engine pulley M, in belt keepers G To Level Mower To Replace Motion Drive Belt See Fig To Replace Mower Blade Drive Belt See FigTo Check Brake To Remove Wheel for Repairs See Fig Transaxle Gear Shift Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigTo Replace Headlight Bulb To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsExcessive Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation01.06.10 BAD

532 43 45-03, 96041017700 specifications

The McCulloch 96041017700,532 43 45-03 is a high-performance garden tool designed to meet the diverse needs of homeowners and landscaping professionals alike. This versatile product is especially known for its powerful engine and user-friendly features, making it a popular choice for those looking to effectively manage their outdoor spaces.

One of the standout characteristics of the McCulloch 96041017700,532 is its robust engine. It typically boasts a strong 43cc two-stroke engine that delivers reliable performance, allowing users to tackle a variety of tasks, from trimming grass to clearing thick underbrush. This engine is designed for high efficiency, which not only enhances performance but also minimizes fuel consumption, making it an economical choice for regular use.

Equipped with advanced technologies, this model features an Easy Start system. This innovation significantly reduces the effort required to start the machine, making it accessible for users of all strength levels. Additionally, the product incorporates anti-vibration technology, which helps to reduce user fatigue during extended periods of operation. This leads to a more comfortable experience for the operator, allowing them to work longer without discomfort.

The design of the McCulloch 96041017700,532 prioritizes user convenience. It typically comes with an adjustable handle that can be easily maneuvered for better control during use. This feature is crucial when navigating around flower beds or tight spaces to ensure efficient cutting without damaging surrounding plants. Moreover, the lightweight construction of this model allows users to handle it with ease, increasing productivity in the garden or yard.

In terms of maintenance, McCulloch has engineered this model for easy access to crucial components. Regular maintenance tasks are simplified, allowing users to keep their machines in excellent condition with minimal effort.

Overall, the McCulloch 96041017700,532 43 45-03 stands out as a reliable, efficient, and user-friendly tool for both casual gardeners and professional landscapers. Its powerful engine, innovative technologies, and thoughtful design make it a go-to choice for anyone looking to maintain a pristine outdoor environment. Whether it's trimming, cutting, or clearing, this model is equipped to handle it all with ease.
Top Page Image Contents