Mowing Tips, To Start Engine See Fig | McCulloch 532 43 45-03

OPERATION

TO START ENGINE (See Fig. 4)

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

•Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

•Place gear shift lever in neutral position.

•Move attachment clutch to “DISENGAGED” position.

•Move throttle control to choke position.

NOTE: Before starting, read the warm and cold starting procedures below.

•Insert key into ignition and turn key clockwise to “START” position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry.

WARM WEATHER STARTING (50°F/10°C and above)

•When engine starts, move the throttle control to the fast position.

•The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING (50°F/10°C and below)

•When engine starts, allow engine to run with the throttle control in the choke position until the engine runs roughly, then move throttle control to fast posi- tion. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

•The attachments can also be used during the engine warm-up period.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32° F /0°C) the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjust- ments section of this manual.

MOWING TIPS

•Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trim- ming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 12).

Fig. 12

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by se- lecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

532 43 45-03, 96041017700 specifications

The McCulloch 96041017700,532 43 45-03 is a high-performance garden tool designed to meet the diverse needs of homeowners and landscaping professionals alike. This versatile product is especially known for its powerful engine and user-friendly features, making it a popular choice for those looking to effectively manage their outdoor spaces.

One of the standout characteristics of the McCulloch 96041017700,532 is its robust engine. It typically boasts a strong 43cc two-stroke engine that delivers reliable performance, allowing users to tackle a variety of tasks, from trimming grass to clearing thick underbrush. This engine is designed for high efficiency, which not only enhances performance but also minimizes fuel consumption, making it an economical choice for regular use.

Equipped with advanced technologies, this model features an Easy Start system. This innovation significantly reduces the effort required to start the machine, making it accessible for users of all strength levels. Additionally, the product incorporates anti-vibration technology, which helps to reduce user fatigue during extended periods of operation. This leads to a more comfortable experience for the operator, allowing them to work longer without discomfort.

The design of the McCulloch 96041017700,532 prioritizes user convenience. It typically comes with an adjustable handle that can be easily maneuvered for better control during use. This feature is crucial when navigating around flower beds or tight spaces to ensure efficient cutting without damaging surrounding plants. Moreover, the lightweight construction of this model allows users to handle it with ease, increasing productivity in the garden or yard.

In terms of maintenance, McCulloch has engineered this model for easy access to crucial components. Regular maintenance tasks are simplified, allowing users to keep their machines in excellent condition with minimal effort.

Overall, the McCulloch 96041017700,532 43 45-03 stands out as a reliable, efficient, and user-friendly tool for both casual gardeners and professional landscapers. Its powerful engine, innovative technologies, and thoughtful design make it a go-to choice for anyone looking to maintain a pristine outdoor environment. Whether it's trimming, cutting, or clearing, this model is equipped to handle it all with ease.