McCulloch 96041017700 Service and Adjustments, To Remove Mower See Fig, To Install Mower See Figs

Page 18

SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift lever in neutral position.

•Place attachment clutch in “DISENGAGED” position.

•Turn ignition key to “STOP” and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER (See Fig. 21)

•Place attachment clutch in “DISENGAGED” position.

•Lower attachment lift lever to its lowest position.

•Roll belt off engine pulley (M) and belt keepers (G).

•Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket.

•Remove clutch cable spring (Q) from idler arm (R).

•Disconnect front link (E) from mower - remove retainer spring and washer.

•Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers.

CAUTION: AFTER REAR LIFT LINKS

ARE DISCONNECTED, THE ATTACH-

MENT LIFT LEVER WILL BE SPRING

LOADED. HAVE A TIGHT GRIP ON LIFT

LEVER WHEN CHANGING POSITION

OF THE LEVER.

•Slide mower out from under right side of tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINK (E) AND REAR LIFT LINKS

(C)FROM TRACTOR AND HOOK THE CLUTCH SPRING

(Q)INTO THE CABLE GUIDE ON FRONT EDGE OF LOWER DASH.

TO INSTALL MOWER (See Figs. 21 & 26)

Be sure tractor is on level surface and engage parking brake.

•Lower attachment lift lever to its lowest position.

CAUTION: LIFT LEVER IS SPRING

LOADED. HAVE A TIGHT GRIP ON

LIFT LEVER, LOWER IT SLOWLY AND

ENGAGE IN LOWEST POSITION.

NOTE: Be sure mower side suspension arms (A) are point- ing forward before sliding mower under tractor.

•Slide mower under tractor until it is centered under tractor.

G MF

RG

Q

P

A E

B

C

K

D

 

L

Fig. 21

 

 

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents M13538 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents Unassembled Parts Steering WheelToremovetractorfromcarton AssemblyTools Required for Assembly Before Removing Tractor from SkidInstall Seat See Fig Check Brake SystemOperation Know Your Tractor To SET Parking Brake See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged Stopping See FigTo Operate Mower To Adjust Mower Cutting Height See FigTo Move Forward and Backward See Fig To Stop Mower BladesBefore Starting the Engine Mowing Tips To Start Engine See FigGeneral Recommendations MaintenanceMaintenance ScheduleBlade Care BatteryTractor Blade Removal See FigEngine Cleaning Engine Cooling System See FigDeck Washout Port See Fig Service and Adjustments To Install Mower See FigsTo Remove Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower To Replace Mower Blade Drive Belt See Fig To Check BrakeTo Replace Motion Drive Belt See Fig To Start Engine with a Weak Battery See Fig Transaxle Gear Shift Lever Neutral Adjustment See FigTo Adjust Steering Wheel Alignment To Remove Wheel for Repairs See FigTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionExcessive Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX01.06.10 BAD

532 43 45-03, 96041017700 specifications

The McCulloch 96041017700,532 43 45-03 is a high-performance garden tool designed to meet the diverse needs of homeowners and landscaping professionals alike. This versatile product is especially known for its powerful engine and user-friendly features, making it a popular choice for those looking to effectively manage their outdoor spaces.

One of the standout characteristics of the McCulloch 96041017700,532 is its robust engine. It typically boasts a strong 43cc two-stroke engine that delivers reliable performance, allowing users to tackle a variety of tasks, from trimming grass to clearing thick underbrush. This engine is designed for high efficiency, which not only enhances performance but also minimizes fuel consumption, making it an economical choice for regular use.

Equipped with advanced technologies, this model features an Easy Start system. This innovation significantly reduces the effort required to start the machine, making it accessible for users of all strength levels. Additionally, the product incorporates anti-vibration technology, which helps to reduce user fatigue during extended periods of operation. This leads to a more comfortable experience for the operator, allowing them to work longer without discomfort.

The design of the McCulloch 96041017700,532 prioritizes user convenience. It typically comes with an adjustable handle that can be easily maneuvered for better control during use. This feature is crucial when navigating around flower beds or tight spaces to ensure efficient cutting without damaging surrounding plants. Moreover, the lightweight construction of this model allows users to handle it with ease, increasing productivity in the garden or yard.

In terms of maintenance, McCulloch has engineered this model for easy access to crucial components. Regular maintenance tasks are simplified, allowing users to keep their machines in excellent condition with minimal effort.

Overall, the McCulloch 96041017700,532 43 45-03 stands out as a reliable, efficient, and user-friendly tool for both casual gardeners and professional landscapers. Its powerful engine, innovative technologies, and thoughtful design make it a go-to choice for anyone looking to maintain a pristine outdoor environment. Whether it's trimming, cutting, or clearing, this model is equipped to handle it all with ease.
Top Page Image Contents