McCulloch MC16H38ST manual Tractor, Brake Operation, Tires, Operator Presence System, Blade Care

Page 16

MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

CAUTION: Use only a replacement blade approved by the manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL (See Fig. 10)

•Raise mower to highest position to allow access to blades.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

•Remove blade bolt by turning counterclockwise.

•Install new or resharpened blade with stamped "THIS SIDE UP" facing deck and mandrel assembly.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Install and tighten blade bolt securely (45-55 Ft. Lbs. torque).

IMPORTANT: SPECIAL BLADE BOLT HEAT TREATED.

BLADE

MANDREL

 

ASSEMBLY

 

CENTER

 

HOLE

BLADE BOLT (SPECIAL)

STAR

FIG. 10

TO SHARPEN BLADE (See Fig. 11)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

 

OR PIN

 

FIG. 11

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model NO. MC16H38ST 16.0 HP 38 Inch Lawn Tractor Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Battery Unassembled PartsAssembly Tools Required for AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidConnect Battery See Figs Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate Mower See FigTo Operate on Hills To Transport See FigsADD Gasoline To Start Engine See FigPurge Transmission Automatic Transmission Warm UPMowing Tips Maintenance Lubrication ChartService Dates General RecommendationsTractor Brake OperationTires Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Replace Motion Drive Belt See Fig To Adjust BrakeTo Check Brake Transaxle Motion Control Lever Neutral Adjustment See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Schematic Tractor - Model Number MC16H38ST 96011013201, Product no 11Electrical KEY Part NO. NO. Description Chassis Repair Parts Drive Repair Parts Steering Repair Parts Engine Optional EquipmentSeat Decals Wheels & TiresMower Lift Mower Deck KEY Part Description Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

96011013201, MC16H38ST specifications

The McCulloch 96011013201, also known as the MC16H38ST, is a remarkable addition to the lineup of McCulloch outdoor power equipment. This versatile and highly efficient string trimmer is designed to provide users with exceptional performance for landscaping and gardening tasks.

One of the standout features of the MC16H38ST is its powerful 38cc 2-stroke engine, which promises not only brute strength but also efficient fuel consumption. This engine allows for a robust cutting performance, making it ideal for tackling tough weeds and thick grass. The advanced engine technology ensures reliable starting and smooth operation, reducing the frustration often associated with starting outdoor equipment.

This model is equipped with a split shaft design, providing ease of use and enhanced versatility. Users can effortlessly switch attachments, transforming the trimmer into a multi-functional tool for various gardening tasks. Whether you need to edge your lawn, trim hedges, or even tackle tough underbrush, the MC16H38ST can adapt to your needs with ease.

Comfort and ergonomics are key considerations in the design of the MC16H38ST. The trimmer features an adjustable handle, allowing users to find their ideal working position. The lightweight design further enhances maneuverability, reducing fatigue during extended use. Additionally, the anti-vibration technology incorporated into the handle system helps minimize user discomfort, enabling longer, more productive work sessions.

The McCulloch 96011013201 also boasts a reliable automatic line feed system, which automatically dispenses the cutting line as needed during operation. This feature not only saves time but also ensures a consistently clean cut, contributing to the overall efficiency of your gardening efforts.

For enhanced visibility during low-light conditions, the trimmer is designed with a durable cutting head that allows for precise trimming in tight spaces. Its robust design and construction ensure longevity, making it a worthy investment for both amateur gardeners and professional landscapers.

In summary, the McCulloch 96011013201, MC16H38ST, is a well-engineered, feature-rich string trimmer that marries power, versatility, and comfort. With its potent engine, split shaft design, adjustable ergonomics, and automatic line feed system, it delivers outstanding performance, making it an invaluable tool for maintaining beautiful lawns and gardens. Whether you are a weekend warrior or a professional gardener, the MC16H38ST is sure to impress with its performance and reliability.
Top Page Image Contents