McCulloch MC16H38ST, 96011013201 manual Transaxle Motion Control Lever Neutral Adjustment See Fig

Page 22

SERVICE AND ADJUSTMENTS

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

TRANSMISSION

INPUT PULLEYCENTER SPAN KEEPER

FIG. 22

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 23)

The motion control lever has been preset at the factory and adjustment should not be necessary.

Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

Start engine and move motion control lever until tractor does not move forward or backward.

Hold motion control lever in that position and turn engine off.

While holding motion control lever in place, loosen the adjustment bolt.

Move motion control lever to the neutral (N) (lock gate) position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

Loosen the adjustment bolt.

Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

Tighten adjustment bolt securely.

Start engine and test.

If tractor still creeps, repeat above steps until satis- fied.

MOTION CONTROL

NEUTRAL

LEVER

LOCK GATE

 

ADJUSTMENT

BOLT

FIG. 23

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See“PURGETRANSMISSION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor.If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 24)

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 24

22

Image 22
Contents Model NO. MC16H38ST 16.0 HP 38 Inch Lawn Tractor General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceIV. Towing Table of Contents Battery Unassembled PartsTo Remove Tractor from CAR- TON AssemblyTools Required for Assembly Before Removing Tractor from SkidConnect Battery See Figs Check for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate on Hills Before Starting the EngineTo Operate Mower See Fig To Transport See FigsPurge Transmission ADD GasolineTo Start Engine See Fig Automatic Transmission Warm UPMowing Tips Service Dates MaintenanceLubrication Chart General RecommendationsTires TractorBrake Operation Operator Presence SystemEngine Cleaning To Install Mower See Fig Service and AdjustmentsTo Remove Mower See Fig To Replace Mower Blade Drive Belt See Fig To Level Mower HousingBelt Installation Belt RemovalTo Replace Motion Drive Belt See Fig To Adjust BrakeTo Check Brake To Adjust Steering Wheel ALIGN- Ment Transaxle Motion Control Lever Neutral Adjustment See FigTransmission REMOVAL/REPLACEMENT Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace FuseFuel System StorageOther Engine OILTroubleshooting Points With attachment clutch Schematic Tractor - Model Number MC16H38ST 96011013201, Product no 11Electrical KEY Part NO. NO. Description Chassis Repair Parts Drive Repair Parts Steering Repair Parts Engine Optional EquipmentSeat Decals Wheels & TiresMower Lift Mower Deck KEY Part Description Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

96011013201, MC16H38ST specifications

The McCulloch 96011013201, also known as the MC16H38ST, is a remarkable addition to the lineup of McCulloch outdoor power equipment. This versatile and highly efficient string trimmer is designed to provide users with exceptional performance for landscaping and gardening tasks.

One of the standout features of the MC16H38ST is its powerful 38cc 2-stroke engine, which promises not only brute strength but also efficient fuel consumption. This engine allows for a robust cutting performance, making it ideal for tackling tough weeds and thick grass. The advanced engine technology ensures reliable starting and smooth operation, reducing the frustration often associated with starting outdoor equipment.

This model is equipped with a split shaft design, providing ease of use and enhanced versatility. Users can effortlessly switch attachments, transforming the trimmer into a multi-functional tool for various gardening tasks. Whether you need to edge your lawn, trim hedges, or even tackle tough underbrush, the MC16H38ST can adapt to your needs with ease.

Comfort and ergonomics are key considerations in the design of the MC16H38ST. The trimmer features an adjustable handle, allowing users to find their ideal working position. The lightweight design further enhances maneuverability, reducing fatigue during extended use. Additionally, the anti-vibration technology incorporated into the handle system helps minimize user discomfort, enabling longer, more productive work sessions.

The McCulloch 96011013201 also boasts a reliable automatic line feed system, which automatically dispenses the cutting line as needed during operation. This feature not only saves time but also ensures a consistently clean cut, contributing to the overall efficiency of your gardening efforts.

For enhanced visibility during low-light conditions, the trimmer is designed with a durable cutting head that allows for precise trimming in tight spaces. Its robust design and construction ensure longevity, making it a worthy investment for both amateur gardeners and professional landscapers.

In summary, the McCulloch 96011013201, MC16H38ST, is a well-engineered, feature-rich string trimmer that marries power, versatility, and comfort. With its potent engine, split shaft design, adjustable ergonomics, and automatic line feed system, it delivers outstanding performance, making it an invaluable tool for maintaining beautiful lawns and gardens. Whether you are a weekend warrior or a professional gardener, the MC16H38ST is sure to impress with its performance and reliability.