McCulloch 96011013201 manual To Replace Motion Drive Belt See Fig, To Check Brake, To Adjust Brake

Page 21

SERVICE AND ADJUSTMENTS

BELT KEEPER

WIRE BELT KEEPER

 

MANDREL

PULLEY

ENGINE

PULLEY

IDLER

PULLEYS

MANDREL

PULLEY02844

FIG. 20

TO CHECK AND ADJUST BRAKE (See Fig. 21)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

Disengage transmission by placing freewhel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

Depress clutch/brake pedal all the way down and en- gage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-9/16", loosen jam nut and turn nut “A” until distance becomes 1-9/16". Retighten jam nut against nut “A”.

Engage transmission by placing freewheel control in “transmission engaged” position.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

NUT “A”

1-9/16”

JAM NUT

 

OPERATING

ARM

DO NOT TOUCH THIS NUT. IF FURTHER

BRAKE ADJUSTMENT IS NECESSARY CON-

TACT YOUR NEAREST AUTHORIZED SERVICE

CENTER/DEPARTMENT

FIG. 21

TO REPLACE MOTION DRIVE BELT (See Fig. 22)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler and clutching idler.

Remove belt downward from around engine pulley.

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down around transmission cooling fan and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll around the top groove of engine pulley.

Install belt through stationary idler and clutching idler.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

21

Image 21
Contents Model NO. MC16H38ST 16.0 HP 38 Inch Lawn Tractor Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts BatteryTools Required for Assembly AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidConnect Battery See Figs Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Operate Mower See Fig Before Starting the EngineTo Operate on Hills To Transport See FigsTo Start Engine See Fig ADD GasolinePurge Transmission Automatic Transmission Warm UPMowing Tips Lubrication Chart MaintenanceService Dates General RecommendationsBrake Operation TractorTires Operator Presence SystemEngine Cleaning Service and Adjustments To Install Mower See FigTo Remove Mower See Fig Belt Installation To Level Mower HousingTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Adjust Brake To Replace Motion Drive Belt See FigTo Check Brake Transmission REMOVAL/REPLACEMENT Transaxle Motion Control Lever Neutral Adjustment See FigTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace FuseOther StorageFuel System Engine OILTroubleshooting Points With attachment clutch Tractor - Model Number MC16H38ST 96011013201, Product no 11 SchematicElectrical KEY Part NO. NO. Description Chassis Repair Parts Drive Repair Parts Steering Repair Parts Optional Equipment EngineSeat Wheels & Tires DecalsMower Lift Mower Deck KEY Part Description Policy Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation

96011013201, MC16H38ST specifications

The McCulloch 96011013201, also known as the MC16H38ST, is a remarkable addition to the lineup of McCulloch outdoor power equipment. This versatile and highly efficient string trimmer is designed to provide users with exceptional performance for landscaping and gardening tasks.

One of the standout features of the MC16H38ST is its powerful 38cc 2-stroke engine, which promises not only brute strength but also efficient fuel consumption. This engine allows for a robust cutting performance, making it ideal for tackling tough weeds and thick grass. The advanced engine technology ensures reliable starting and smooth operation, reducing the frustration often associated with starting outdoor equipment.

This model is equipped with a split shaft design, providing ease of use and enhanced versatility. Users can effortlessly switch attachments, transforming the trimmer into a multi-functional tool for various gardening tasks. Whether you need to edge your lawn, trim hedges, or even tackle tough underbrush, the MC16H38ST can adapt to your needs with ease.

Comfort and ergonomics are key considerations in the design of the MC16H38ST. The trimmer features an adjustable handle, allowing users to find their ideal working position. The lightweight design further enhances maneuverability, reducing fatigue during extended use. Additionally, the anti-vibration technology incorporated into the handle system helps minimize user discomfort, enabling longer, more productive work sessions.

The McCulloch 96011013201 also boasts a reliable automatic line feed system, which automatically dispenses the cutting line as needed during operation. This feature not only saves time but also ensures a consistently clean cut, contributing to the overall efficiency of your gardening efforts.

For enhanced visibility during low-light conditions, the trimmer is designed with a durable cutting head that allows for precise trimming in tight spaces. Its robust design and construction ensure longevity, making it a worthy investment for both amateur gardeners and professional landscapers.

In summary, the McCulloch 96011013201, MC16H38ST, is a well-engineered, feature-rich string trimmer that marries power, versatility, and comfort. With its potent engine, split shaft design, adjustable ergonomics, and automatic line feed system, it delivers outstanding performance, making it an invaluable tool for maintaining beautiful lawns and gardens. Whether you are a weekend warrior or a professional gardener, the MC16H38ST is sure to impress with its performance and reliability.