McCulloch MC16H38ST, 96011013201 Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 8

ASSEMBLY

•Place freewheel control in "transmission engaged" position (see "TO TRANSPORT" in Operation section of this manual).

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place motion control lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine.After engine has started, move throttle control to idle position.

•Release parking brake.

•Slowly move the motion control lever forward and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

•Turn ignition key to "STOP" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING”in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFOREYOU OPERATE AND ENJOYYOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROMTHIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in drive position.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls - their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓It is important to purge the transmission before oper- ating your tractor for the first time. Follow proper start- ing and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model NO. MC16H38ST 16.0 HP 38 Inch Lawn Tractor Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Battery Unassembled PartsAssembly Tools Required for AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidConnect Battery See Figs Check Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Before Starting the Engine To Operate Mower See FigTo Operate on Hills To Transport See FigsADD Gasoline To Start Engine See FigPurge Transmission Automatic Transmission Warm UPMowing Tips Maintenance Lubrication ChartService Dates General RecommendationsTractor Brake OperationTires Operator Presence SystemEngine Cleaning To Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing Belt InstallationTo Replace Mower Blade Drive Belt See Fig Belt RemovalTo Check Brake To Adjust BrakeTo Replace Motion Drive Belt See Fig Transaxle Motion Control Lever Neutral Adjustment See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Throttle Control Cable To Adjust Choke ControlTo Adjust Carburetor To Replace FuseStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Schematic Tractor - Model Number MC16H38ST 96011013201, Product no 11Electrical KEY Part NO. NO. Description Chassis Repair Parts Drive Repair Parts Steering Repair Parts Engine Optional EquipmentSeat Decals Wheels & TiresMower Lift Mower Deck KEY Part Description Policy Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX

96011013201, MC16H38ST specifications

The McCulloch 96011013201, also known as the MC16H38ST, is a remarkable addition to the lineup of McCulloch outdoor power equipment. This versatile and highly efficient string trimmer is designed to provide users with exceptional performance for landscaping and gardening tasks.

One of the standout features of the MC16H38ST is its powerful 38cc 2-stroke engine, which promises not only brute strength but also efficient fuel consumption. This engine allows for a robust cutting performance, making it ideal for tackling tough weeds and thick grass. The advanced engine technology ensures reliable starting and smooth operation, reducing the frustration often associated with starting outdoor equipment.

This model is equipped with a split shaft design, providing ease of use and enhanced versatility. Users can effortlessly switch attachments, transforming the trimmer into a multi-functional tool for various gardening tasks. Whether you need to edge your lawn, trim hedges, or even tackle tough underbrush, the MC16H38ST can adapt to your needs with ease.

Comfort and ergonomics are key considerations in the design of the MC16H38ST. The trimmer features an adjustable handle, allowing users to find their ideal working position. The lightweight design further enhances maneuverability, reducing fatigue during extended use. Additionally, the anti-vibration technology incorporated into the handle system helps minimize user discomfort, enabling longer, more productive work sessions.

The McCulloch 96011013201 also boasts a reliable automatic line feed system, which automatically dispenses the cutting line as needed during operation. This feature not only saves time but also ensures a consistently clean cut, contributing to the overall efficiency of your gardening efforts.

For enhanced visibility during low-light conditions, the trimmer is designed with a durable cutting head that allows for precise trimming in tight spaces. Its robust design and construction ensure longevity, making it a worthy investment for both amateur gardeners and professional landscapers.

In summary, the McCulloch 96011013201, MC16H38ST, is a well-engineered, feature-rich string trimmer that marries power, versatility, and comfort. With its potent engine, split shaft design, adjustable ergonomics, and automatic line feed system, it delivers outstanding performance, making it an invaluable tool for maintaining beautiful lawns and gardens. Whether you are a weekend warrior or a professional gardener, the MC16H38ST is sure to impress with its performance and reliability.
Top Page Image Contents