11 Assemble Truss |
|
TF (6) | TE (6) |
a. Attach Brace (AC) to two Roof Truss Channels (AB) (one on each |
|
side of Brace. Secure Brace with Screws (TF) and Nuts (TE). |
|
Follow picture above to connect Brace to a Truss Channel at each end of the Brace.
The nut goes on outside of the truss.
b.Use Truss Connector (TA) to attach Roof Truss Channels at top. Secure with Screws (TF) and Nuts (TE). Before completely tightening, lay assembly on its side to be sure Channels and Brace are parallel. Completely tighten all hardware.
WARNING
Do not overtighten the Cap Nut. If the end of the Bolt breaks through the plastic cap, call our Customer Service Department.
Be sure that Truss Connector is aligned with the Truss Channels.
9