Troy-Bilt TB4000 manual Operation, Fueling Unit, Starting Instructions

Page 14

Oil and Fuel (continued)

Fuel Cap

Fig. 4-3

Fig. 4-4

UNLEADED

FUEL

FUELING UNIT

Gasoline is extremely flammable and its vapors can explode if ignited. To avoid serious personal injury, always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames away from the area.

1.Remove fuel cap (Fig. 4-3). Remove the tag from the fuel tank neck.

NOTE: Fill or add fuel to the tank only when the unit is in a horizontal position (Fig. 4-3).

Remove fuel cap slowly to avoid injury from gasoline spray.

2.Place spout of gas container into the fill hole on the fuel tank and fill tank(Fig. 4-4).

Add gasoline in a clean, well ventilated area outdoors. Avoid creating a source of ignition for spilt fuel.

NOTE: Do not overfill tank.

3.Wipe up any gasoline that may have spilled

4.Reinstall the fuel cap.

Never operate the unit without the fuel cap securely in place.

5.Move the unit at least 30 ft. (9.1 m) from the fueling source and site before starting the engine.

NOTE: Dispose of the old gasoline in accordance to Federal, State, and Local regulations.

Section 5

Operation

STARTING INSTRUCTIONS

Operate this unit only in a well ventilated area outdoors. Carbon monoxide exhaust fumes can be lethal in a confined area.

Avoid accidental starting. Be in the starting position whenever pulling the starting rope. To avoid serious personal injury, the operator and unit must be in a stable position while starting.

Cold Start – First Start of the Day or Engine Ran Out of Fuel

NOTE: Keep the throttle control depressed at all times until the engine is warmed up.

1.Check oil level in crankcase. See Checking the Oil Level in Maintenance section.

2.Fill the fuel tank with fresh, clean, unleaded fuel. See Section 4, Oil and Fuel.

3.Put the On/Off Stop Control in the START [I] posi- tion (Fig. 5-1).

4.Place the choke lever in the FULL choke (A) position (Fig. 5-2).

NOTE: There is a small notch for each position where the the choke lever sets.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Owner/Operator Manual Cycle Trimmer Brush Cutter Table of Contents IntroductionService Information Accessory 182153 Spark Arrestor KitSafety Warnings for GAS Trimmers SafetySymbol Meaning Before OperatingWhile Operating While Operating with Cutting BladeSymbol Meaning Safety Alert Symbol Safety and International SymbolsOther Safety Warnings For Service INFORMATION, CallOIL Symbol Meaning Unleaded FuelTRIMMER/BRUSH Cutter Safety Thrown Objects and Rotating Cutter can Cause Severe InjuryKnow Your Unit ApplicationsInstalling AssemblyInstalling and Adjusting the J-HANDLE AdjustingRemove the Cutting Attachment and Install the Cutting Blade Installing the HarnessRemoving and Installing Cutting Attachment Shield Remove the Cutting Attachment ShieldRemove the Cutting Attachment Remove the Cutting Blade and Install the Cutting Attachment Install the Cutting AttachmentRecommended Fuel Type Oil and FuelRecommended OIL Type Starting Instructions OperationFueling Unit Stopping Instructions Engine Re-Start Warm Engine With FuelTips for Best Trimming Results Adjusting Trimming Line LengthHolding the Trimmer Cutting Blade Operating Tips Using the Cutting BladeDecorative Trimming When Maintenance Needed GO to MaintenanceMaintenance Schedule Line InstallationSingle Line Installation Go To for Membrane Line InstallationChecking the OIL Level Installing a Prewound ReelReplacement Parts Changing the OILAIR Filter Maintenance Cleaning the Air FilterRocker ARM Clearance Carburetor AdjustmentOil and Fuel, Recommended Fuel Clean Air Filter Check FuelReplacing the Spark Plug Storage ACCESSORIES/REPLACEMENT PartsCleaning Long Term StorageTroubleshooting U S E T I O NInch 0.655 mm Specifications200-10,000 rpm Manufacturers Warranty Coverage WarrantyOwners Warranty Responsibilities MTD Southwest Inc

TB4000 specifications

The Troy-Bilt TB4000 is a versatile and reliable workhorse designed for homeowners and landscapers alike. This compact tiller blends power, efficiency, and user-friendly features, making it an indispensable tool for garden enthusiasts looking to cultivate and maintain their soil.

One of the standout features of the TB4000 is its robust engine. Equipped with a 4-cycle, 24.5cc engine, it delivers ample power to tackle tough soil conditions. This engine provides reliable performance while being easy to start thanks to its user-friendly recoil start mechanism. The four-stroke design eliminates the need for mixing fuel and oil, simplifying maintenance.

The TB4000 boasts a unique tilling capability that makes it suitable for a variety of gardening tasks. It features a 12-inch tilling width and adjustable tilling depth, allowing users to customize their tilling experience. Whether preparing a new garden bed or cultivating existing soil, the TB4000 can handle it with ease.

Durability is another important aspect of the TB4000's design. Its heavy-duty steel tines are built to withstand rigorous use and ensure longevity. The tiller is equipped with a front-mounted transport wheel, which makes it easy to maneuver from one location to another without straining the back or arms.

User comfort is also a major consideration in the design of the TB4000. The tiller features an ergonomic handle that can be adjusted for height, reducing strain during operation. Additionally, its lightweight design aids in overall control and ease of use.

For added convenience, the TB4000 offers a variety of tilling settings. It includes a forward-rotating tine mechanism, ideal for breaking up hard soil, while its adjustable speed allows for fine-tuning based on the task.

In terms of technology, the Troy-Bilt TB4000 comes equipped with enhancements that optimize performance. Its air filter system ensures that the engine runs smoothly by keeping dirt and debris at bay, which can be particularly useful in dusty conditions.

Overall, the Troy-Bilt TB4000 stands out in the realm of tillers, providing exceptional performance, durability, and user comfort. Whether you are new to gardening or a seasoned pro, this tiller is designed to meet the demands of various gardening tasks, making it an excellent investment for anyone dedicated to cultivating lush and healthy landscapes.
Top Page Image Contents