Troy-Bilt TB4000 Symbol Meaning Unleaded Fuel, Oil, ON/OFF Stop Control, HOT Surface Warning

Page 7

Safety (continued)

SYMBOL MEANING

• UNLEADED FUEL

Always use clean, fresh unleaded fuel.

• OIL

Refer to operator's manual for the proper type of oil.

• THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY

WARNING: Do not operate without the cutting attachment shield in place.

Keep away from the rotating cutting attachment.

• ON/OFF STOP CONTROL

ON / START / RUN

• ON/OFF STOP CONTROL

OFF OR STOP

• HOT SURFACE WARNING

Do not touch a hot muffler, gear housing or cylinder. You may get burned. These parts get extremely hot from operation. When turned off they remain hot for a short time.

• SHARP BLADE

WARNING: Sharp blade on cutting attachment shield. To prevent serious injury, do not touch line cutting blade.

• CHOKE CONTROL

A • FULL choke position.

B • PARTIAL choke position.

C • RUN position.

• BRUSH CUTTERS • Replace dull blade.

Do not sharpen the cutting blade. Sharpening the blade can cause the blade tip to break off while in use. This can result in severe personal injury.

• TRIMMER/BRUSH CUTTER SAFETY

WARNING: Thrown objects and rotating cutter can cause severe injury. Keep bystanders, especially children and pets, at least 50 feet (15 m) away from the cutting area. The cutting attachment shield must be used when using the trimmer cutting attach- ment.

WARNING: The operation of any power tool can cause foreign objects to be thrown into your eyes. This can lead to severe eye damage. Before commencing power tool operation, always wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and a full face shield when needed.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Owner/Operator Manual Cycle Trimmer Brush Cutter Introduction Table of ContentsAccessory 182153 Spark Arrestor Kit Service InformationBefore Operating SafetySymbol Meaning Safety Warnings for GAS TrimmersWhile Operating with Cutting Blade While OperatingFor Service INFORMATION, Call Safety and International SymbolsOther Safety Warnings Symbol Meaning Safety Alert SymbolThrown Objects and Rotating Cutter can Cause Severe Injury Symbol Meaning Unleaded FuelTRIMMER/BRUSH Cutter Safety OILApplications Know Your UnitAdjusting AssemblyInstalling and Adjusting the J-HANDLE InstallingRemove the Cutting Attachment Shield Installing the HarnessRemoving and Installing Cutting Attachment Shield Remove the Cutting Attachment and Install the Cutting BladeRemove the Cutting Attachment Install the Cutting Attachment Remove the Cutting Blade and Install the Cutting AttachmentRecommended OIL Type Oil and FuelRecommended Fuel Type Fueling Unit OperationStarting Instructions Engine Re-Start Warm Engine With Fuel Stopping InstructionsHolding the Trimmer Adjusting Trimming Line LengthTips for Best Trimming Results Decorative Trimming Using the Cutting BladeCutting Blade Operating Tips Line Installation MaintenanceMaintenance Schedule When Maintenance Needed GO toGo To for Membrane Line Installation Single Line InstallationChanging the OIL Installing a Prewound ReelReplacement Parts Checking the OIL LevelCleaning the Air Filter AIR Filter MaintenanceCheck Fuel Carburetor AdjustmentOil and Fuel, Recommended Fuel Clean Air Filter Rocker ARM ClearanceReplacing the Spark Plug Long Term Storage ACCESSORIES/REPLACEMENT PartsCleaning StorageU S E T I O N Troubleshooting200-10,000 rpm SpecificationsInch 0.655 mm Owners Warranty Responsibilities WarrantyManufacturers Warranty Coverage MTD Southwest Inc

TB4000 specifications

The Troy-Bilt TB4000 is a versatile and reliable workhorse designed for homeowners and landscapers alike. This compact tiller blends power, efficiency, and user-friendly features, making it an indispensable tool for garden enthusiasts looking to cultivate and maintain their soil.

One of the standout features of the TB4000 is its robust engine. Equipped with a 4-cycle, 24.5cc engine, it delivers ample power to tackle tough soil conditions. This engine provides reliable performance while being easy to start thanks to its user-friendly recoil start mechanism. The four-stroke design eliminates the need for mixing fuel and oil, simplifying maintenance.

The TB4000 boasts a unique tilling capability that makes it suitable for a variety of gardening tasks. It features a 12-inch tilling width and adjustable tilling depth, allowing users to customize their tilling experience. Whether preparing a new garden bed or cultivating existing soil, the TB4000 can handle it with ease.

Durability is another important aspect of the TB4000's design. Its heavy-duty steel tines are built to withstand rigorous use and ensure longevity. The tiller is equipped with a front-mounted transport wheel, which makes it easy to maneuver from one location to another without straining the back or arms.

User comfort is also a major consideration in the design of the TB4000. The tiller features an ergonomic handle that can be adjusted for height, reducing strain during operation. Additionally, its lightweight design aids in overall control and ease of use.

For added convenience, the TB4000 offers a variety of tilling settings. It includes a forward-rotating tine mechanism, ideal for breaking up hard soil, while its adjustable speed allows for fine-tuning based on the task.

In terms of technology, the Troy-Bilt TB4000 comes equipped with enhancements that optimize performance. Its air filter system ensures that the engine runs smoothly by keeping dirt and debris at bay, which can be particularly useful in dusty conditions.

Overall, the Troy-Bilt TB4000 stands out in the realm of tillers, providing exceptional performance, durability, and user comfort. Whether you are new to gardening or a seasoned pro, this tiller is designed to meet the demands of various gardening tasks, making it an excellent investment for anyone dedicated to cultivating lush and healthy landscapes.
Top Page Image Contents