Troy-Bilt TB4000 manual Assembly, Installing and Adjusting the J-HANDLE

Page 9

Section 3

 

J-Handle

 

(4) Screws

Top Clamp

 

Middle Clamp

 

Bottom Clamp

 

Fig. 3-1

Nuts

 

Decal

Fig. 3-2

Fig. 3-3

Assembly

On some units, the J-handle may be preinstalled and only require loosening the screws and adjusting the J-handle to the operator. Go to step 6 for adjusting the J-handle if preinstalled.

INSTALLING AND ADJUSTING THE J-HANDLE

Installing

1.Remove the screws, nuts, top and middle clamp pieces that were installed on the J-handle for ship- ping.

2.Place the J-handle between the top and middle clamp pieces (Fig. 3-1).

3.While holding the three pieces together, install the four (4) screws through the top clamp and into middle clamp.

NOTE: The holes in the top and middle clamp will line up only when assembled correctly.

4.Place the clamps and J-handle the over the shaft housing and onto the bottom clamp.

5.Hold each hex nut in the bottom clamp recess with a finger. Start screws with a large Phillips screw- driver. Do not tighten until you make the handle adjustment.

Adjusting

6.Loosen the screws so that the J-handle can be easily moved in the clamp assembly. Do not remove the screws or nuts.

7.Slide the J-handle in or out until the arrow/white line on the decal touches the clamp assembly (Fig. 3-2).

8.While holding the unit in the operating position (Fig. 3-3), position the J-handle to the location that provides you the best grip.

9.Tighten the clamp screws evenly, until the J-handle is secure.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Owner/Operator Manual Cycle Trimmer Brush Cutter Introduction Table of ContentsAccessory 182153 Spark Arrestor Kit Service InformationSymbol Meaning SafetySafety Warnings for GAS Trimmers Before OperatingWhile Operating with Cutting Blade While OperatingOther Safety Warnings Safety and International SymbolsSymbol Meaning Safety Alert Symbol For Service INFORMATION, CallTRIMMER/BRUSH Cutter Safety Symbol Meaning Unleaded FuelOIL Thrown Objects and Rotating Cutter can Cause Severe InjuryApplications Know Your UnitInstalling and Adjusting the J-HANDLE AssemblyInstalling AdjustingRemoving and Installing Cutting Attachment Shield Installing the HarnessRemove the Cutting Attachment and Install the Cutting Blade Remove the Cutting Attachment ShieldRemove the Cutting Attachment Install the Cutting Attachment Remove the Cutting Blade and Install the Cutting AttachmentOil and Fuel Recommended OIL TypeRecommended Fuel Type Operation Fueling UnitStarting Instructions Engine Re-Start Warm Engine With Fuel Stopping InstructionsAdjusting Trimming Line Length Holding the TrimmerTips for Best Trimming Results Using the Cutting Blade Decorative TrimmingCutting Blade Operating Tips Maintenance Schedule MaintenanceWhen Maintenance Needed GO to Line InstallationGo To for Membrane Line Installation Single Line InstallationReplacement Parts Installing a Prewound ReelChecking the OIL Level Changing the OILCleaning the Air Filter AIR Filter MaintenanceOil and Fuel, Recommended Fuel Clean Air Filter Carburetor AdjustmentRocker ARM Clearance Check FuelReplacing the Spark Plug Cleaning ACCESSORIES/REPLACEMENT PartsStorage Long Term StorageU S E T I O N TroubleshootingSpecifications 200-10,000 rpmInch 0.655 mm Warranty Owners Warranty ResponsibilitiesManufacturers Warranty Coverage MTD Southwest Inc

TB4000 specifications

The Troy-Bilt TB4000 is a versatile and reliable workhorse designed for homeowners and landscapers alike. This compact tiller blends power, efficiency, and user-friendly features, making it an indispensable tool for garden enthusiasts looking to cultivate and maintain their soil.

One of the standout features of the TB4000 is its robust engine. Equipped with a 4-cycle, 24.5cc engine, it delivers ample power to tackle tough soil conditions. This engine provides reliable performance while being easy to start thanks to its user-friendly recoil start mechanism. The four-stroke design eliminates the need for mixing fuel and oil, simplifying maintenance.

The TB4000 boasts a unique tilling capability that makes it suitable for a variety of gardening tasks. It features a 12-inch tilling width and adjustable tilling depth, allowing users to customize their tilling experience. Whether preparing a new garden bed or cultivating existing soil, the TB4000 can handle it with ease.

Durability is another important aspect of the TB4000's design. Its heavy-duty steel tines are built to withstand rigorous use and ensure longevity. The tiller is equipped with a front-mounted transport wheel, which makes it easy to maneuver from one location to another without straining the back or arms.

User comfort is also a major consideration in the design of the TB4000. The tiller features an ergonomic handle that can be adjusted for height, reducing strain during operation. Additionally, its lightweight design aids in overall control and ease of use.

For added convenience, the TB4000 offers a variety of tilling settings. It includes a forward-rotating tine mechanism, ideal for breaking up hard soil, while its adjustable speed allows for fine-tuning based on the task.

In terms of technology, the Troy-Bilt TB4000 comes equipped with enhancements that optimize performance. Its air filter system ensures that the engine runs smoothly by keeping dirt and debris at bay, which can be particularly useful in dusty conditions.

Overall, the Troy-Bilt TB4000 stands out in the realm of tillers, providing exceptional performance, durability, and user comfort. Whether you are new to gardening or a seasoned pro, this tiller is designed to meet the demands of various gardening tasks, making it an excellent investment for anyone dedicated to cultivating lush and healthy landscapes.
Top Page Image Contents