Troy-Bilt RZT 50 manual IV. Service

Page 6

5.Never allow children under 14 years old to operate the machine. Children 14 years and over should only operate the machine under close parental supervision and proper instruction.

6.Use extra care when approaching blind corners, shrubs, trees or other objects that may obscure your vision of a child or other hazard.

7.Remove the key when the machine is left unattended to prevent unauthorized operation.

IV. SERVICE

1.Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

a.Use only an approved container.

b.Never remove fuel cap or add fuel with the en- gine running. Allow the engine to cool at least two minutes before refueling.

c.Replace the fuel cap securely and wipe off any spilled fuel before starting the engine as it may cause a fire or explosion.

d.Extinguish all cigarettes, cigars, pipes and oth- er sources of ignition.

e.Never refuel the machine indoors because fuel vapors will accumulate in the area.

f.Never store the fuel container or machine inside where there is an open flame or spark, such as a gas hot water heater, space heater or furnace.

2.Never run a machine inside a closed area.

3.To reduce fire hazard, keep the machine free of grass, leaves or other debris build-up. Clean up oil or fuel spillage. Allow the machine to cool at least 5 minutes before storing.

4.Before cleaning, repairing or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the spark plug to prevent accidental starting.

5.Check the blade and engine mounting bolts at fre- quent intervals for proper tightness. Also visually inspect blades for damage (e.g., excessive wear, bent, cracked). Replace with blades which meet original equipment specifications.

6.Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

7.Never tamper with safety devices. Check their proper operation regularly. Use all guards as instructed in this manual.

8.After striking a foreign object, stop the engine, remove the wire from the spark plug and thoroughly inspect the mower for any damage. Repair the damage before restarting and operating the mower.

9.Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. For your safety protection, frequently check the components and replace with manufacturer’s recommended parts when necessary.

10.Mower blades are sharp and can cut. Wrap the blades or wear gloves, and use extra caution when servicing blades.

11.Check the park brake operation frequently. Adjust and service as required.

12.Muffler, engine and belt guards become hot during operation and can cause a burn. Allow to cool down before touching.

13.Do not change the engine governor settings or overspeed the engine. Excessive engine speeds are dangerous.

14.Observe proper disposal laws and regulations. Improper disposal of fluids and materials can harm the environment and the ecology.

a.Prior to disposal, contact your local Environmental Protection Agency to determine the proper method for disposing of the waste. Recycling centers are established to properly dispose of materials in an environmentally safe fashion.

b.Use proper containers when draining fluids. Do not use food or beverage containers that may mislead someone into drinking from them. Properly dispose of the containers im- mediately following the draining of fluids.

c.DO NOT pour oil or other fluids into the ground, down a drain or into a stream, pond, lake, or other body of water. Observe Environ- mental Protection Agency regulations when disposing of oil, fuel, coolant, brake fluid, fil- ters, batteries, tires and other harmful waste.

15.We do not recommend the use of a pressure washer or garden hose to clean your unit. They may cause damage to electrical components; spindles; pulleys; bearings; or the engine. The use of water will result in shortened life and reduce serviceability.

WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

6

Image 6
Contents Important Read Safety Rules and Instructions Carefully OPERATOR’S ManualTable of Contents Tractor PreparationConnect the Battery Position the Rear BumperLower the Deck Discharge Chute Safe Operation Practices General OperationII. Slope Operation Do notIII. Children IV. Service Hands and Feet Safety Graphic Mower Deck Safety Decals and LabelsDeck Height Indicator Park Brake Throttle Control Indicator Located on Left ConsoleSafety Decals and Labels Recording Model and Serial Number Customer SupportCopy the model number here Copy the serial number here Slope Gauge Controls and Features Seat Adjustment Lever Not Seen Ignition SwitchPower Take-Off PTO Switch Deck Height IndexIndicator Panel Features Hour Meter/Indicator PanelHourHour Meter Features Fuel Tank CapParking Brake Engagement Lever Throttle ControlChoke Control Rear Bumper Not ShownOperation General SafetySafety Interlock System Before Operating Your TractorUsing Jumper Cables to Start Engine Starting the EngineCold Weather Starting Stopping the Engine Practice Operation Initial USEDriving the Tractor Driving the Tractor Forward Turning the Tractor While Driving ForwardDriving the Tractor In Reverse Turning While Driving RearwardDriving on Slopes Executing a Zero TurnStopping the Tractor Operating the PTOUsing the Mower Deck Checking the Safety Interlock CircuitsAdjustments Adjusting the Operators SeatAdjusting RH & LH Drive Control Levers Hydrostatic Transmission Maintenance MaintenanceEngine Maintenance General Battery InformationBattery Storage Charging the BatteryBattery Maintenance Servicing Electrical SystemTire Maintenance Using the Transmission Bypass RodsTractor Creeping Tractor High Speed Tracking Transmission Drive BeltIf storing the tractor for 30 days or more Using a fuel stabilizerTractor Storage Emptying the fuel systemReleasing belt tension with the idler pulley Mower DeckDeck Removal Rolling the belt off the PTO pulleyDeck Installation Using the idler pulley to tension the beltRolling the belt into the PTO pulley Leveling the Mower Deck Side to Side LevelingFront to Back Leveling Using the Deck Wash System Adjusting the Gauge WheelsDeck Maintenance Cleaning the Spindle PulleysMower Blade Care Deck LubricationReplacing the Deck Drive Belt Page Page MANUFACTURER’S Warranty Coverage MANUFACTURER’S Limited Warranty for

RZT 50 specifications

The Troy-Bilt RZT 50 is a notable addition to the riding mower market, designed to provide both power and precision for homeowners seeking a reliable solution for lawn care. With a cutting width of 50 inches, this zero-turn riding mower allows users to tackle larger areas efficiently, making it suitable for properties with expansive lawns.

One of the standout features of the RZT 50 is its robust engine, typically powered by a 25 HP Briggs & Stratton engine. This engine delivers impressive torque and reliability, offering users the ability to handle tough mowing conditions without losing power. The mower's design prioritizes ease of use, with a trusty electric start that eliminates the hassle of manual cranking.

The RZT 50 is equipped with a dual hydrostatic drive system, which provides seamless steering and allows for easy maneuverability around obstacles such as trees, flower beds, and garden features. The zero-turn capability means that users can make tight turns without leaving uncut grass, giving the mower an edge in terms of efficiency and precision.

Another significant characteristic of the Troy-Bilt RZT 50 is its Comfort Seat, designed with ergonomics in mind. This padded, high-back seat offers support during longer mowing sessions, ensuring a comfortable riding experience. Additionally, the mower features adjustable cutting heights ranging from 1.5 inches to 4 inches, allowing users to customize their lawn care according to individual preferences and seasonal needs.

In terms of maintenance, the RZT 50 comes with a maintenance-free battery and easily accessible components for routine checks, reducing the downtime often associated with mower upkeep. Moreover, the mower boasts a durable steel frame and deck, ensuring longevity and resistance to wear over time.

Overall, the Troy-Bilt RZT 50 stands out with its combination of power, innovation, and user-friendly features, making it an ideal choice for homeowners aiming to maintain a lush and well-manicured lawn with minimal effort. With its thoughtfully designed capabilities, the RZT 50 proves that effective lawn care can be both easy and enjoyable.