Troy-Bilt 1919 When Adjusting or Making Repairs to Your Generator, When Testing for Engine Spark

Page 4

Section 1: Safety Rules

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR GENERATOR

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc. can catch fire.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

•The generator must be at least 5 feet from structures having combustible walls and/or other combustible materials.

•Keep at least 3 feet of clearance on all sides of generator for adequate cooling, maintenance and servicing.

•In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

CAUTION

Excessively high operating speeds increase risk of injury and damage to generator.

Excessively low speeds impose a heavy load.

•DO NOT tamper with governed speed. Generator supplies correct rated frequency and voltage when running at governed speed.

•DO NOT modify generator in any way.

CAUTION

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•See “Don’t Overload Generator”.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

CAUTION

Improper treatment of generator can damage it and shorten its life.

•Use generator only for intended uses.

•If you have questions about intended use, ask dealer or call 1-888-611-6708.

•Operate generator only on level surfaces.

•DO NOT expose generator to excessive moisture, dust, dirt, or corrosive vapors.

•DO NOT insert any objects through cooling slots.

•If connected devices overheat, turn them off and disconnect them from generator.

•Shut off generator if:

-electrical output is lost;

-equipment sparks, smokes, or emits flames; -unit vibrates excessively.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Portable Generator / Generador Portátil Model / Modelo Questions? Preguntas? Helpline 1-888-611-6708 M-F8-5 CTSafety Rules Table of ContentsEquipment Description When Adding or Draining Fuel When Starting EquipmentWhen Operating Equipment When Transporting or Repairing EquipmentWhen Adjusting or Making Repairs to Your Generator When Testing for Engine SparkFeatures and Controls Section Know Your GeneratorInstall Wheel Kit AssemblyRemove Generator From Carton Assembly When Adding FuelBefore Starting the Engine Add Engine OilUsing the Generator Connecting to a Building’s Electrical SystemSection Operation System GroundConnecting Electrical Loads OperationOperating Generator Starting the EngineReceptacles Generator Adapter Cord SET120/240 Volt AC, 30 Amp, Locking Receptacle Volt AC, 20 Amp, Duplex ReceptaclesDont Overload Power ManagementExample Specifications Section MaintenanceGeneral Maintenance Recommendations Storage StorageGenerator Storage Engine Storage Other Storage TipsTroubleshooting Section TroubleshootingProblem Cause Solution About your equipment warranty TROY-BILT Owner Warranty Policy Effective November 1Equipment Consumer Use Commercial Use Reglas de Seguridad Conserve Estas Instrucciones Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadSección 1 Reglas de Seguridad Cuando Añada Combustible O Vacíe EL DepósitoCuando Ponga EN Funcionamiento EL Equipo Cuando Opere EL EquipoSección 1 Instrucciones de Seguridad PrecauciónCuando Ajuste O Haga Reparaciones a SU Generador Cuando Pruebe LA Bujía DEL MotorCaracterísticas y Mandos Conozca SU GeneradorTomacorriente Dobles de 120 Voltios AC, 20 Amp Tomacorriente con Dispositivo de Seguridad deMontaje MontajePara Retirar El Generador De La Caja Instale el Juego de RuedasSección 3 Montaje Antes DE Darle Arranque AL MotorAgregar Aceite al Motor Agregue CombustibleOperación USO DEL GeneradorTierra del Sistema Conexión al Sistema Eléctrico de un EdificioSección 4 Operación Operando EL Generador PrecauciónEncienda el Motor Conexion De Cargas ElectricasReceptáculos Precaución Juego DE Cables DEL Adaptador DEL Generador120/240 Voltios AC, 30 Amp, Receptáculo de Seguridad Volt AC, 20 Amp, Receptáculos DoblesNo Sobrecargue Generador CapacidadControl de la Energía EjemploEspecificaciones MantenimientoRecomendaciones Generales DE Mantenimiento Diagnositicos DE Averías Almacenamiento & Diagnosticos de AveríasAlmacenamiento Efectiva desde el 1 ro de Noviembre Equipo Para Uso Del Consumidor Para Uso ComercialGarantía Limitada Acerca de la seguridad de su equipo

1919 specifications

Troy-Bilt 1919 is a remarkable addition to Troy-Bilt's expansive collection of outdoor power equipment, symbolizing over a century of innovation and reliable performance. Designed for gardening enthusiasts and professional landscapers alike, the 1919 model integrates advanced features and technology that enhance its usability and efficiency.

One of the standout characteristics of the Troy-Bilt 1919 is its robust construction. Built with high-quality materials, it offers durability that withstands the rigors of outdoor use. The reinforced frame and heavy-duty components ensure that this equipment can tackle even the most challenging gardening tasks without compromising performance.

The engine is a critical element of the 1919 model, boasting powerful performance with a reliable gas-powered engine that provides ample horsepower to handle various gardening and landscaping jobs. This engine is designed for easy starting, reducing the frustration often experienced with traditional pull-starts. With improved fuel efficiency, users can enjoy longer operational times between tank refills, making it an economical choice for extensive gardening projects.

Troy-Bilt has incorporated innovative technology into the 1919 model, including the patented 3-in-1 capability, which allows users to mulch, bag, or discharge clippings effortlessly. This versatility is ideal for maintaining clean and healthy lawns, as it caters to a variety of preferences in lawn care while promoting optimal grass health.

Another impressive feature is the adjustable cutting height, which enables users to customize the mower’s height to suit different types of grass and seasonal lawn care needs. This feature ensures that users can achieve a professional-looking finish without unnecessary strain or effort.

Comfort and ergonomics have also been prioritized in the design of the Troy-Bilt 1919. The adjustable handle, padded grips, and lightweight structure make it user-friendly and reduce fatigue during prolonged use. Additionally, the smooth and responsive maneuverability enhances the mowing experience, allowing users to navigate tight spaces and edges with ease.

Overall, the Troy-Bilt 1919 stands out for its blend of strength, innovation, and user-oriented design. Whether you're a gardening novice or an experienced professional, this model promises to deliver superior performance and reliability to meet your lawn care needs. With its multitude of features and cutting-edge technology, the Troy-Bilt 1919 exemplifies the brand's commitment to excellence in outdoor power equipment.
Top Page Image Contents