S.E.P BC90(1+1) manual Checks and Adjustments, Clutch Lever, Every 300 hours

Page 15

Every 300 hours

Change the gearbox and transmission oil following the instructions given above in the paragraph cover- ing running in.

POWER TAKE OFF

Every 8 hours

Grease the PTO (see figure 14, item 1).

Also grease the PTO every time you fit a new attach- ment.

12

CHECKS AND ADJUSTMENTS

CLUTCH LEVER

The clutch lever must have a free play of about 5 to 6 mm before the clutch starts to disengage.

Insufficient play can cause clutch slip, while excess play can lead to failure to disengage fully. Adjust play by means of cable adjuster (see fig. 15, item. 1).

Image 15

Contents BC 90 1+1 Assembling Instruction for MOTOR-MOWER MOTOR-MOWER Table of Contents Safety Regulations IntroductionGeneral Notices Operating of Attachments MaintenanceStarting the Engine Operating MOTOR-MOWEREngine Identification Identification DataEC Marking MOTOR-MOWER IdentificationIdentification Data Technical Specifications Transfer Printing Instructions and Safety Safety DeviceOperating the Controls MOTOR-MOWER ControlsPower Take Off PTO control lever Stopping the Engine Operating the MOTOR-MOWERGearbox and Transmission MaintenanceMounting the 2ND Wheel Upon Request DRY AIR FilterChecks and Adjustments Clutch LeverEvery 300 hours General Cutter BAR Mower Technical SpecificationsCutter BAR Mower Adjustment Cutter BAR MowerCutting height adjustment Knife mechanism adjustmentCam mechanism movement Lubrication Cutter BAR Mowers MaintenanceEC Certificate of Conformity Valpadana S.p.A