S.E.P BC90(1+1) manual Technical Specifications

Page 9

TECHNICAL SPECIFICATIONS

ENGINE

The motor-mower may be fitted with the following en- gines:

HONDA GC 160; 4 stroke benzina; 3,7 kW (5 HP); 160 cm3.

LOMBARDINI LGA 226; 4 stroke benzina; 4 kW (5,4 HP); 220 cm3.

STARTING

Auto-winder device.

CLUTCH

Cone type in oil bath with control lever on handle- bars.

GEARS

One forward gears and one reverse gear; gears are engaged through a lever fitted on handlebars.

VELOCITÀ MASSIMA IN km/h

MODELLO

 

MARCIA

 

I

 

RM

(Pneumatici 3.50-6)

2,5

 

1,4

 

 

 

 

TRANSMISSION

Oil bath gear box.

POWER TAKE OFF

Mounted attachments are driven via an independent, single speed PTO engaged by a control lever on the handlebars.

Maximum PTO speed: 923 rpm (clockwise rotation).

6

COUPLING OF ATTACHMENTS

Coupling of attachments to the PTO is obtained through a quick change fitting that provides for fast installation of the attachments, and does not require the use of bolts.

HANDLEBARS

Adjustable in height with dampers.

WHEELS

Pneumatic tires with agricultural tread.

Type and available sizes: Tractor type: 3.50-6

Inflation pressure: 1,2 bar.

ACCESSORIES

The motor-mower can be fitted with a wide range of additional easy-to-fit accessories.

These are, for instance, several types of iron wheels, watering pumps and sprayers, snowploughs, ploughs, trailers, water sprinkling trolleys, etc.

Refer to our catalogue for details about the various accessories available.

MASS

Refer to the plate installed on the machine.

DIMENSIONS

The overall dimensions of the motor-mower are shown in fig. 2.

Image 9
Contents BC 90 1+1 Assembling Instruction for MOTOR-MOWER MOTOR-MOWER Table of Contents Safety Regulations IntroductionGeneral Notices Starting the Engine MaintenanceOperating MOTOR-MOWER Operating of AttachmentsEC Marking Identification DataMOTOR-MOWER Identification Engine IdentificationIdentification Data Technical Specifications Transfer Printing Instructions and Safety Safety DeviceOperating the Controls MOTOR-MOWER ControlsPower Take Off PTO control lever Stopping the Engine Operating the MOTOR-MOWERMounting the 2ND Wheel Upon Request MaintenanceDRY AIR Filter Gearbox and TransmissionChecks and Adjustments Clutch LeverEvery 300 hours Cutter BAR Mower Adjustment Cutter BAR Mower Technical SpecificationsCutter BAR Mower GeneralCutting height adjustment Knife mechanism adjustmentCam mechanism movement Lubrication Cutter BAR Mowers MaintenanceEC Certificate of Conformity Valpadana S.p.A