Teledyne manual 1.Model T265 Specifications

Specifications, Approvals, & Certifications Model T265 Chemiluminescence Ozone Analyzer Addendum to Model T200 Manual

Table 2-1. Model T265 Specifications

PARAMETER

Ranges Measurement Mode Measurement Units Zero Noise 1 Span Noise 1

Lower Detectable Limit Zero Drift (24 hours) Span Drift (24 hours) Linearity

Precision

Lag Time 1 Rise/Fall Time 1 Sample Flow Rate Reagent Gas Reagent Flow Environmental

Temperature Range

Humidity Range

Dimensions H x W x D

Weight, Analyzer

AC Power

Analog Output Ranges

Analog Output Resolution Standard I/O

Optional I/O

1As defined by the US EPA

SPECIFICATION

0-100 ppb to 0-2,000 ppb full scale, user selectable. Single Range or AutoRange

ppb, ppm, µg/m3 mg/m3 <0.15 ppb (RMS)

<0.5% of reading (RMS) above 100 ppb <0.3 ppb

<0.5 ppb

<0.5% of full scale <1% of full scale <0.5% of reading <10 sec

<20 sec to 95%

500 cm³/min ± 10%

NO at 10,000 ppm ±10% 5 ± 2 cm³/min

Installation Category (Over-voltage Category) II Pollution Degree 2

5 – 40° C (with EPA equivalency)

10-90% RH non-condensing

7" x 17" x 23.5" (18 cm x 43 cm x 61 cm)

40 lbs (18 kg) (with internal pump)

100 V – 120 V, 60Hz (3.0 A)

220 V – 240 V, 50 Hz (2.5 A)

All Outputs: 100 mV, 1 V, 5 V, 10 V

Two concentration outputs convertible to 4-20 mA isolated current loop (option)

All Ranges with 5% Under/Over Range

1 part in 4096 of selected full scale voltage

1Ethernet: 10/100Base-T

2RS-232 (300 – 115,200 baud)

2USB device ports

8opto-isolated digital status outputs

6opto-isolated digital control inputs

4analog outputs

1USB com port

1RS485

8analog inputs (0-10V, 12-bit)

4digital alarm outputs Multidrop RS232

34-20mA current outputs

10

07337B DCN6324