Mounting and Wiring Instructions

CAUTION: For fixtures labeled for outdoor and wet location use, provide a water-tight seal between the fixture and the mounting surface by using silicone or similar caulking.

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1).

3.Thread hex nut (D) onto mounting nipple (E) approximately 1/4 inch and insert lockwasher (F), then thread mounting nipple (E) onto mounting bar (A) and secure with hex nut (D).

4.Identify color coding of fixture wires (see fig. 2).

5.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

6.Fit wire connector (G from fig. 1) over wires and twist until there is a firm connection. If wire connector (G) easily comes off, reattach and check again for a firm connection.

7.Repeat steps 5 and 6 with the white (group B from fig. 2) fixture wires and outlet box wires.

8.Partially thread green grounding screw (H) into side hole (I) on mounting bar (A) (see fig. 1).

9.Wrap ground wire from fixture around green grounding screw (H) leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (G), if applicable.

10.Tighten green grounding screw (H). Do not over tighten.

11.Tuckwires inside outlet box (B).

FIXTURE ASSEMBLY INSTRUCTIONS

1.Place back plate (J) over mounting nipple (E) and secure into place with cap nut (K).

2.Install lamp(s). Do not exceed recommended wattage.

3.Turn power back on at circuit box.

w-143 specifications

The Westinghouse W-143 is a notable addition to the world of industrial equipment, renowned for its cutting-edge technologies and outstanding performance characteristics. This model, primarily used in power generation and manufacturing sectors, embodies a robust design that emphasizes efficiency and reliability.

One of the standout features of the W-143 is its advanced thermal efficiency. This is achieved through a combination of innovative heat exchange systems and streamlined airflow designs, ensuring optimal energy usage while minimizing waste. The model incorporates advanced insulation materials that enhance thermal retention, which is crucial for maintaining consistent operating temperatures and thereby improving overall productivity.

In terms of technology, the W-143 is equipped with state-of-the-art automation capabilities. The integration of intelligent control systems allows for real-time monitoring and adjustments, which can significantly reduce downtime. Operators can easily access performance data and operational metrics through a user-friendly interface, facilitating better decision-making and proactive maintenance scheduling.

Another key characteristic of the W-143 is its modular design. This feature allows for easy scalability and customization, making it suitable for a wide range of applications. Whether in a small manufacturing unit or a large-scale power plant, the modularity ensures that the W-143 can meet the varying demands of different operational environments.

The durability of the Westinghouse W-143 is another aspect that contributes to its appeal. Constructed with high-quality materials that withstand the rigors of industrial use, the model boasts a longer lifecycle compared to traditional counterparts. This resilience not only reduces the frequency of replacements but also translates to lower total operational costs over time.

Environmental considerations are also key in the design of the W-143. It incorporates low-emission technologies that align with contemporary regulatory standards, supporting businesses in achieving their sustainability goals.

In conclusion, the Westinghouse W-143 is a technologically advanced, efficient, and versatile piece of equipment that meets the demanding needs of today’s industries. With its focus on innovative performance, user-friendly automation, and environmental responsibility, it stands out as a preferred choice for organizations aiming to enhance productivity while committing to sustainable practices.