Woods Equipment CZR2652B, CZR2242B manual PRE-OPERATION Check List OPERATOR’S Responsibility

PRE-OPERATION CHECK LIST

				WOODS
PRE-OPERATION CHECK LIST
(OPERATOR’S RESPONSIBILITY)
___	Review and follow all safety rules and safety	___	Never allow riders.
	decal instructions.	___	Inspect area and remove stones, branches or
___	Check that all safety decals are installed and in		other hard objects that might be thrown,
	good condition. Replace if damaged.		causing injury or damage.
___	Check to make sure all shields and guards	___	Clean area around oil fill dipstick. Remove
	are properly installed and in good condition.		dipstick and check to be sure oil is in operating
	Be sure that either the discharge shield or		range (between marks on dipstick). Add oil if
	complete vacuum attachment is installed.		necessary but Do Not Overfill. Install dipstick
___	Check that all hardware is properly installed.		assembly firmly until cap bottoms out on tube.
	and secured.		Dipstick assembly must always be secured into
___	Check that equipment is properly and securely		fill tube when engine is running.
	attached to power unit.	___	Check all lubrication points and grease as
___	Check to be sure engine is free of dirt and		instructed in manual.
	debris. Pay particular attention to the cooling	___	Check hydrostatic fluid level. Check to be sure
	fins, governor parts and muffler. Clean air		cooling fins on hydrostat are clean.
	intake screen. Check air cleaner; service if	___	Perform a functional check of the safety
	necessary.		interlock system each time you operate the
			unit.

22