Woods Equipment CZR2652B, CZR2242B manual Starting

Page 8

SAFETY

WOODS

Starting

-Start only according to instructions in this manual or on the machine.

-Before attempting to start the engine, make sure:

-the parking brake is on;

-the PTO is disengaged;

-the traction drive is in NEUTRAL.

-When starting the engine, make sure hands and feet are clear of the blades.

-Do not start the machine while standing in front of the discharge chute or with the chute directed at someone.

-Do not engage PTO at full throttle. Throttle to idle or lowest possible engine speed.

-Do not change engine governor settings or overspeed the engine. Operating the engine at excessive speed can increase the hazard of personal injury.

Interrupting operation

-Before leaving the operator's position:

-Park on level ground.

-Disengage the PTO.

-Set the parking brake.

-Shut off the engine and remove the key.

-Disengage the PTO and wait until the blades quit rotating:

-before raising cutterdeck;

-when not mowing;

-for transport;

-when crossing surfaces other than grass.

-Stop the engine, disengage the PTO, set parking brake and wait until the blades quit rotating and lower cutting unit:

-before refueling;

-before removing grass catcher;

-before making height adjustment unless the adjustment can be made from the operator's position.

-Stop the engine, disengage the PTO, set parking brake and disconnect the spark plug wire(s) or remove the key:

-before clearing blockages or unclogging chute;

-before checking, cleaning or working on the machine;

-after striking a foreign object. Inspect the machine for damage and make repairs before restarting;

-if the machine begins to vibrate abnormally: shut off machine immediately. Inspect and make repairs as needed before restarting;

-except for repairs or adjustments as specifically noted, such as for carburetor adjustment, where the engine must be running. Keep hands and feet clear of moving parts in these circumstances.

-Allow the blades to come to a complete stop when stopping operation to clear blockages, unclog, inspect the machine, do maintenance or repair.

-Reduce the throttle setting during engine shut- down and, if the engine is provided with a shut- off valve, turn the fuel off at the conclusion of mowing.

8

Image 8
Contents MOW’N Machine California Wash Hands After HandlingImportant Message To the DealerTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents FiguresSignal word definitions Become AlertSite preparation and circumstances Preparing for Safe OperationGeneral Operating SafelyStarting Mowing slopes Maneuvering SafelyMaintenance Safety FuelBattery Warning Transportation and Storage SafetyTools Required for Assembly Uncrate UnitTire Pressure Traction LeversFinal Preparations Labels Woods Read and understand Operators Manual & labels Woods Choke C Fuel Selector Valve U Lift and traction levers operators right side Pushing the Machine PRE-OPERATION Check List OPERATOR’S Responsibility Fueling Before Starting the EngineOperator Presence Interlock System Starting the EngineOperating Notes DrivingCutting Cutting TipsUSE Hours First Before Every Yearly EachHours Maintenance Record Battery Check DailyLubrication Fuel Filter Engine OILSpark Plugs Dual Element AIR Cleaner Purging Transaxles Engine CoolingSpecific Torques Transaxles Transaxle Fluid ChangeBlade Installation Blade RemovalSharpening Blade BalanceDeck Rollers Deck LevelingHeight of CUT Parking Brake Hydrostatic Transaxle Adjust Ments NeutralARM Rest Height Adjustments Spindle Deck Hydro Transaxle Drive Belt Cutterdeck BeltBelt Tension Page Parts Section FRAME-ENGINE/CLUTCH Assy ITM Description QTY ITM Part no Not IllustratedTransaxle Assy ITM Description QTY WasherFuel TANK/BUMPER & Control Panel Frame W/LABS Fuel Valve & Cover Plate COVER-FRAME, Rear Deck Lift Assembly WLDMT-DECKLIFT, Front Caster Assembly Dust Cover KICKPLATE/SEAT Assembly Seat Assembly Steering GRIP-HANDLE Parking Brake TRANSAXLE, RH Wire Harness HARNESS-MAIN Wire Side Discharge Deck W/LABELS To Decklift GUARD-LH 52 Deck BELTS-CUTTERDECK BELT-52 Cutterdeck Under Seat 11UNDER Footplate LABEL-CONTROL Panel Woods 4164679 Limited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company