57 |
34 |
58 |
33 |
32 |
33 |
34 |
31 |
Figure 9. Belt Shield Installation
DEALER CHECK LIST
PRE-DELIVER CHECK LIST
Inspect the equipment thoroughly after assembly to make sure it is properly set up before delivering it to the customer.
The following check lists are a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.
___ Check that shields and guards are properly installed and in good condition. Replace if damaged.
___ Check all bolts to be sure they are properly torqued.
___ Check that all cotter pins and safety pins are properly installed. Replace if damaged.
___ Check and grease all lubrication points.
DELIVERY CHECK LIST
___ Show customer how to make adjustments and select proper PTO speed.
___ Instruct customer how to lubricate and explain importance of lubrication.
___ Present Operator's Manual and request that customer and all operators read it before oper- ating equipment. Point out the manual safety rules, explain their meanings and emphasize the increased safety hazards that exist when safety rules are not followed.
___ Make customer aware of optional equipment available so that customer can make proper choices as required.
Point out all guards and shields. Explain their importance and the safety hazards that exist when not kept in place and in good condition.
NOTICE
■Operating vacuum attachment with ROPS/ enclosure requires that the deck height adjustment handle be folded down whenever possible. Failure to fold down handle may result in damage to the handle.
10 Installation | MAN0258 (Rev. 12/14/2007) |
|
|