Woods Equipment RBC60 LRC60 Maintenance, Replacing Blade Cutting Edge, LRC60 Tine Replacement

Page 13

MAINTENANCE

The information in this section is written for operators who possess basic mechanical skills. If you need help, your dealer has trained service technicians available. For your protection, read and follow all safety informa- tion in this manual.

„Before dismounting power unit or performing any service or maintenance, follow these steps: disengage power to equipment, lower the 3-point hitch and all raised components to the ground, operate valve levers to release any hydraulic pres- sure, set parking brake, stop engine, remove key, and unfasten seat belt.

„NEVER GO UNDERNEATH EQUIPMENT. Never place any part of the body underneath equipment or between moveable parts even when the engine has been turned off. Hydraulic system leak down, hydraulic system failures, mechanical failures, or movement of control levers can cause equipment to drop or rotate unexpectedly and cause severe injury or death.

•Service work does not require going under- neath.

•Read Operator's Manual for service instruc- tions or have service performed by a qualified dealer.

„Keep all persons away from operator control area while performing adjustments, service, or maintenance.

CAUTION

„Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

REPLACING BLADE CUTTING EDGE

Remove Cutting Edge

1.Remove plow bolts (27 & 28), hardened flat washers (25), and hex nuts (24).

2.Remove cutting edge (4) from moldboard (5) and replace with new cutting edge. Re-install hardware previously removed.

Reverse Cutting Edge

1.Remove plow bolts (27 & 28), hardened flat washer (25), and hex nuts (24).

2.Remove cutting edge (4) from moldboard and reverse cutting edge with sharp edge down. Re- install hardware previously removed.

 

5

CD6156-3

 

 

24

25

28

 

 

 

4

27

4.Cutting edge

5.Moldboard

24.5/8 NC Hex nut

25.5/8 Hardened flat washer

27.5/8 NC x 1-1/2 Plow bolt

28.5/8 NC x 2 Plow bolt

Figure 9. Cutting Edge Replacement

LRC60 TINE REPLACEMENT

NOTE: Tines should be replaced when they cannot be reformed to their original configuration.

1.Remove carriage bolt (22) and flange lock nut (23) from tine beam. Remove old tine.

2.Inset new tine, hole end first, into tine beam and align holes. Secure with bolt (22) and lock nut (23).

2

CD6156-4

 

 

22

 

23

2.

Rake tine

22.

3/8 NC x 1 Carriage bolt

23.

3/8 NC Flange lock nut

Figure 10. Rake Tine Replacement

MAN0169 (Rev. 5/6/2005)

Maintenance 13

 

 

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Rear Blade & Landscape Rake To the Dealer IntroductionLEA EL Instructivo Table of ContentsGeneral Information SpecificationsRBC60 LRC60 Safety Rules SafetyTraining PreparationStorage MaintenanceSafety & Instructional Decals Be Careful Replace Immediately If DamagedOperation OperationConnect Rear Blade or Rake to Tractor Category 0 / 1 Hitch Pin Kit Optional Offsetting Blade OnlyOperating Techniques Reversing Blade or RakeBackfilling Parking Stand PlacementCutting Ditches Blade Only Owner’s Responsibility PRE-OPERATION Check ListMaintenance MaintenanceLRC60 Tine Replacement Replacing Blade Cutting EdgeCleaning Tail Wheel Adjustment LRC60 OptionalAfter Each Use Periodically or Before Extended StorageAssembly Instructions AssemblyDealer SET-UP Instructions Assemble BladeInstall Optional Caster Wheels Landscape Rake Assembly Landscape RakeQuick Hitch Bushing Kit Optional Install Optional Skid Shoe Kit Rear BladeManual Storage Tube Kit Manual Storage Tube Kit OptionalDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListParts RBC60/LRC60 AssemblyManual Storage Tube KIT Optional PartsCategory 1 Quick Hitch Bushing KIT Optional RBC60 Skid Shoe & LRC60 Tail Wheel OptionalCategory 0 / 1 Hitch PIN KIT Optional SAE Series Torque Chart Bolt Torque ChartMetric Series Torque Chart AppendixAbbreviations Bolt Size ChartWarranty Rev /23/2005 MAN0169

RBC60 LRC60 specifications

Woods Equipment Company is renowned for its commitment to high-quality agricultural and landscaping machinery. One of their standout products is the RBC60 LRC60 landscape rake, specifically designed for commercial users and serious landscapers looking for reliability and efficiency in their projects.

The Woods RBC60 LRC60 features a robust design, emphasizing durability without sacrificing performance. Its construction incorporates heavy-duty materials, ensuring prolonged use even in demanding conditions. This model has been engineered to withstand the rigors of regular use on various terrains, making it an ideal choice for both commercial and residential landscaping tasks.

One of the main features of the RBC60 LRC60 is its adjustable rake angle. Users can quickly adapt the rake's position to suit different applications, from leveling soil to spreading gravel or mulch efficiently. This adjustability allows operators to achieve optimal results, tailoring their approach to the specific requirements of each job.

Additionally, the RBC60 LRC60 comes equipped with a unique set of tines. These tines are designed for versatility, allowing for effective soil preparation, debris collection, and fine grading. The design ensures that elements like rocks and other unwanted materials are efficiently disturbed, making it easier for landscapers to achieve a smooth, even surface.

The hydraulic lift system provides ease of operation, allowing users to raise and lower the rake effortlessly while maintaining control. This feature helps maximize productivity, as operators can quickly transition between tasks without needing to leave their machinery.

Another essential characteristic of the Woods RBC60 LRC60 is its compatibility with a wide range of tractors. This versatility allows it to be used in various applications, from landscaping and gardening to preparing fields. The attachment system is designed for quick disconnect, making it user-friendly for those who operate multiple tools in their work.

In summary, the Woods Equipment RBC60 LRC60 landscape rake combines durability, versatility, and efficiency. Its adjustable rake angle, specialized tines, and hydraulic lift system provide landscapers with the tools they need to tackle a variety of projects effectively. As such, the RBC60 LRC60 represents a valuable addition to the arsenal of any serious professional in the landscaping and agricultural sector, ensuring outstanding performance and reliability on every job.
Top Page Image Contents