Woods Equipment RBC60 LRC60 manual Safety Rules, Training, Preparation, Operation

Page 5

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by an operator’s single careless act.

In addition to the design and configuration of equipment, hazard control and accident preven- tion are dependent upon the awareness, concern, judgement, and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.

It has been said “The best safety device is an informed, careful operator.” We ask you to be that kind of operator.

fastened. Falling off power unit can result in death from being run over or crushed. Keep foldable ROPS systems in “locked up” position at all times.

„Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

„A minimum 20% of tractor and equipment weight must be on the tractor front wheels when attachments are in transport position. Without this weight, front tractor wheels could raise up result- ing in loss of steering. The weight may be attained with front wheel weights, ballast in tires or front tractor weights. Weigh the tractor and equipment. Do not estimate.

TRAINING

„Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals and safety decals are available from your dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319- 6637.) Failure to follow instructions or safety rules can result in serious injury or death.

„If you do not understand any part of this manual and need assistance, see your dealer.

„Know your controls and how to shut down quickly in an emergency.

„Operators must be instructed in and be capable of the safe operation of the equipment, its attach- ments, and all controls. Do not allow anyone to operate this equipment without proper instructions.

„Never allow children or untrained persons to operate equipment.

PREPARATION

„Check that all hardware is properly installed. Always tighten to torque chart specifications unless instructed otherwise in this manual.

„Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

OPERATION

„Consult local utilities before working. Know location of all underground cables, pipelines, over- head wires, and other hazards in working area and avoid contact.

„Keep bystanders away from equipment.

„Do not operate or transport equipment while under the influence of alcohol or drugs.

„Operate only in daylight or good artificial light.

„Keep hands, feet, hair, and clothing away from equipment while engine is running. Stay clear of all moving parts.

„Always comply with all state and local lighting and marking requirements.

„Before transporting, pivot the unit so red reflec- tors face the rear.

„Never allow riders on power unit or attachment.

„Power unit must be equipped with ROPS or ROPS cab and seat belt. Keep seat belt securely fastened. Falling off power unit can result in death from being run over or crushed. Keep foldable ROPS systems in “locked up” position at all times.

„Always sit in power unit seat when operating controls or starting engine. Securely fasten seat belt, place transmission in neutral, engage brake, and ensure all other controls are disengaged before starting power unit engine.

„Make sure attachment is properly secured, adjusted, and in good operating condition.

„Power unit must be equipped with ROPS or ROPS cab and seat belt. Keep seat belt securely

„Look down and to the rear and make sure area is clear before operating in reverse.

„Do not operate or transport on steep slopes.

(Safety Rules continued on next page)

RBC60/LRC60 SR (Rev. 8/26/2005)

Safety 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Rear Blade & Landscape Rake To the Dealer IntroductionLEA EL Instructivo Table of ContentsRBC60 LRC60 SpecificationsGeneral Information Safety Rules SafetyTraining PreparationStorage MaintenanceSafety & Instructional Decals Be Careful Replace Immediately If DamagedConnect Rear Blade or Rake to Tractor OperationOperation Category 0 / 1 Hitch Pin Kit Optional Offsetting Blade OnlyOperating Techniques Reversing Blade or RakeCutting Ditches Blade Only Parking Stand PlacementBackfilling Owner’s Responsibility PRE-OPERATION Check ListMaintenance MaintenanceLRC60 Tine Replacement Replacing Blade Cutting EdgeCleaning Tail Wheel Adjustment LRC60 OptionalAfter Each Use Periodically or Before Extended StorageAssembly Instructions AssemblyDealer SET-UP Instructions Assemble BladeInstall Optional Caster Wheels Landscape Rake Assembly Landscape RakeQuick Hitch Bushing Kit Optional Install Optional Skid Shoe Kit Rear BladeManual Storage Tube Kit Manual Storage Tube Kit OptionalDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListParts RBC60/LRC60 AssemblyManual Storage Tube KIT Optional PartsCategory 1 Quick Hitch Bushing KIT Optional RBC60 Skid Shoe & LRC60 Tail Wheel OptionalCategory 0 / 1 Hitch PIN KIT Optional SAE Series Torque Chart Bolt Torque ChartMetric Series Torque Chart AppendixAbbreviations Bolt Size ChartWarranty Rev /23/2005 MAN0169

RBC60 LRC60 specifications

Woods Equipment Company is renowned for its commitment to high-quality agricultural and landscaping machinery. One of their standout products is the RBC60 LRC60 landscape rake, specifically designed for commercial users and serious landscapers looking for reliability and efficiency in their projects.

The Woods RBC60 LRC60 features a robust design, emphasizing durability without sacrificing performance. Its construction incorporates heavy-duty materials, ensuring prolonged use even in demanding conditions. This model has been engineered to withstand the rigors of regular use on various terrains, making it an ideal choice for both commercial and residential landscaping tasks.

One of the main features of the RBC60 LRC60 is its adjustable rake angle. Users can quickly adapt the rake's position to suit different applications, from leveling soil to spreading gravel or mulch efficiently. This adjustability allows operators to achieve optimal results, tailoring their approach to the specific requirements of each job.

Additionally, the RBC60 LRC60 comes equipped with a unique set of tines. These tines are designed for versatility, allowing for effective soil preparation, debris collection, and fine grading. The design ensures that elements like rocks and other unwanted materials are efficiently disturbed, making it easier for landscapers to achieve a smooth, even surface.

The hydraulic lift system provides ease of operation, allowing users to raise and lower the rake effortlessly while maintaining control. This feature helps maximize productivity, as operators can quickly transition between tasks without needing to leave their machinery.

Another essential characteristic of the Woods RBC60 LRC60 is its compatibility with a wide range of tractors. This versatility allows it to be used in various applications, from landscaping and gardening to preparing fields. The attachment system is designed for quick disconnect, making it user-friendly for those who operate multiple tools in their work.

In summary, the Woods Equipment RBC60 LRC60 landscape rake combines durability, versatility, and efficiency. Its adjustable rake angle, specialized tines, and hydraulic lift system provide landscapers with the tools they need to tackle a variety of projects effectively. As such, the RBC60 LRC60 represents a valuable addition to the arsenal of any serious professional in the landscaping and agricultural sector, ensuring outstanding performance and reliability on every job.
Top Page Image Contents