Woods Equipment RBC60 LRC60 manual Assembly Landscape Rake

Page 16

4.Secure rear blade frame assembly to pivot assembly using pivot cap (3), two hardened flat washers (25), and hex nuts (24).

5.Place rear blade frame assembly in desired position and secure with hitch pin (8).

6.Place parking stand in the down position to support rear blade. See page 11 for storage.

 

24

 

25

8

3

 

 

9

6

CD6155A -1

 

3.

Pivot cap

6.

Pivot assembly

8.Hitch pin

9.Rear blade frame assembly

24.5/8 NC Hex nut

25.5/8 Hardened flat washer

Figure 13. Rear Blade Frame to Pivot Assembly

Assembly Landscape Rake

1.Place jack stands or suitable blocking device under tine beam so pivot tube is pointing upward.

2.Remove pivot cap (3) and hardware from tine beam (1).

3.Place rear blade frame assembly (9) over pivot tube on tine beam (1).

4.Secure rear blade frame assembly to tine beam using pivot cap (3), two hardened flat washers (25), and hex nuts (24).

5.Place rear blade frame assembly in desired position and secure with hitch pin (8).

6.Place parking stand in storage position to support landscape rake. See page 11 for storage.

 

24

 

25

8

3

 

9

 

CD6155B-2

 

1

1.

Tine beam

3.

Pivot cap

8.

Hitch pin

9.

Rear blade frame assembly

24.

5/8 NC Hex nut

25.

5/8 Hardened flat washer

Figure 14. Landscape Rake Assembly

Install Optional Caster Wheels (Landscape Rake)

1.Remove landscape rake from tractor 3-point lift arms if attached.

2.Roll landscape rake over with tines pointing upward.

3.Place jack stands or suitable blocking device under tine beam to raise tine beam approximately 8 to 10 inches.

4.Place tail wheel arm (9) between lugs on tine beam and align holes.

5.Secure into position using three cap screws (13) and flange lock nuts (12).

16 Assembly

MAN0169 (Rev. 5/6/2005)

 

 

Image 16
Contents Rear Blade & Landscape Rake Introduction To the DealerTable of Contents LEA EL InstructivoGeneral Information SpecificationsRBC60 LRC60 Safety Safety RulesTraining PreparationMaintenance StorageSafety & Instructional Decals Replace Immediately If Damaged Be CarefulOperation OperationConnect Rear Blade or Rake to Tractor Offsetting Blade Only Category 0 / 1 Hitch Pin Kit OptionalOperating Techniques Reversing Blade or RakeBackfilling Parking Stand PlacementCutting Ditches Blade Only PRE-OPERATION Check List Owner’s ResponsibilityMaintenance MaintenanceLRC60 Tine Replacement Replacing Blade Cutting EdgeTail Wheel Adjustment LRC60 Optional CleaningAfter Each Use Periodically or Before Extended StorageAssembly Assembly InstructionsDealer SET-UP Instructions Assemble BladeAssembly Landscape Rake Install Optional Caster Wheels Landscape RakeInstall Optional Skid Shoe Kit Rear Blade Quick Hitch Bushing Kit OptionalManual Storage Tube Kit Optional Manual Storage Tube KitDealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListRBC60/LRC60 Assembly PartsParts Manual Storage Tube KIT OptionalRBC60 Skid Shoe & LRC60 Tail Wheel Optional Category 1 Quick Hitch Bushing KIT OptionalCategory 0 / 1 Hitch PIN KIT Optional Bolt Torque Chart SAE Series Torque ChartMetric Series Torque Chart AppendixBolt Size Chart AbbreviationsWarranty Rev /23/2005 MAN0169

RBC60 LRC60 specifications

Woods Equipment Company is renowned for its commitment to high-quality agricultural and landscaping machinery. One of their standout products is the RBC60 LRC60 landscape rake, specifically designed for commercial users and serious landscapers looking for reliability and efficiency in their projects.

The Woods RBC60 LRC60 features a robust design, emphasizing durability without sacrificing performance. Its construction incorporates heavy-duty materials, ensuring prolonged use even in demanding conditions. This model has been engineered to withstand the rigors of regular use on various terrains, making it an ideal choice for both commercial and residential landscaping tasks.

One of the main features of the RBC60 LRC60 is its adjustable rake angle. Users can quickly adapt the rake's position to suit different applications, from leveling soil to spreading gravel or mulch efficiently. This adjustability allows operators to achieve optimal results, tailoring their approach to the specific requirements of each job.

Additionally, the RBC60 LRC60 comes equipped with a unique set of tines. These tines are designed for versatility, allowing for effective soil preparation, debris collection, and fine grading. The design ensures that elements like rocks and other unwanted materials are efficiently disturbed, making it easier for landscapers to achieve a smooth, even surface.

The hydraulic lift system provides ease of operation, allowing users to raise and lower the rake effortlessly while maintaining control. This feature helps maximize productivity, as operators can quickly transition between tasks without needing to leave their machinery.

Another essential characteristic of the Woods RBC60 LRC60 is its compatibility with a wide range of tractors. This versatility allows it to be used in various applications, from landscaping and gardening to preparing fields. The attachment system is designed for quick disconnect, making it user-friendly for those who operate multiple tools in their work.

In summary, the Woods Equipment RBC60 LRC60 landscape rake combines durability, versatility, and efficiency. Its adjustable rake angle, specialized tines, and hydraulic lift system provide landscapers with the tools they need to tackle a variety of projects effectively. As such, the RBC60 LRC60 represents a valuable addition to the arsenal of any serious professional in the landscaping and agricultural sector, ensuring outstanding performance and reliability on every job.