Woods Equipment FSW6000F Dealer Check Lists, PRE-DELIVERY Check List, Delivery Check List

Page 15

DEALER CHECK LISTS

PRE-DELIVERY CHECK LIST

(Dealer Responsibility)

___

Inspect the Mow'n Machine and attachments

 

thoroughly after assembly to be certain it is set up

 

properly before delivering it to the customer.

___

The following check lists are a reminder of points

 

to inspect. Check off each item as it is found sat-

 

isfactory or after proper adjustment is made.

___

Check that all safety shielding and decals are

 

properly installed and in good condition.

___

Check all bolts to be sure they are tight.

___

Check that all cotter pins are properly installed.

___

Check that all gearboxes are serviced and are

 

not leaking.

___

Lubricate equipment as specified in lubrication

 

section.

DELIVERY CHECK LIST

(Dealer Responsibility)

___ Point out safety features of cutter. Explain the importance and meaning of all safety decals and the potential hazards when not followed.

___ Explain to the customer that sweeper attachment requires the use of rear counterweights, as speci- fied in the counterweight chart, to provide neces- sary tractor stability.

___ Present Operator's Manual and request that cus- tomer and all operators read it before operating equipment.

___ Show customer how to make adjustments and select proper PTO speed.

___ Instruct customer how to lubricate equipment and explain importance of lubrication.

___ Show customer how to make sure driveline is properly installed and that spring-activated lock- ing pin or collar slides freely and is seated in groove on tractor PTO shaft.

MAN0118 (Rev. 12/23/2004)

Dealer Check List 13

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents MOW’N Machine Sweeper To the Dealer Ii IntroductionIntroduction Table of ContentsPreparation SafetySafety Rules TrainingMaintenance TransportationStorage Be Careful Safety & Instructional Decals33347E Operation OperationUneven Terrain PRE-OPERATION Check ListOwner Responsibility Lubrication ServiceService Chain AdjustmentDealer SET-UP Instructions AssemblyAssembly Fixed Angle Mount KIT InstallationHoles in Sweepster Shield WAY Angle Mount KITAttaching Sweeper to Tractor WAY Angle Wiring InstructionsIgnition Purple Delivery Check List Dealer Check ListDealer Check Lists PRE-DELIVERY Check ListParts WAY Angle Sweeper AssemblyREF Part Description Part QTY Description Fixed Angle Sweeper Mount KIT AssemblyWAY Angle Sweeper Wire Diagram Appendix Bolt Torque ChartSAE Series Torque Chart Typical Washer InstallationsAbbreviations Bolt Size ChartLimited Warranty What is Covered Woods Equipment Company MAN0118

FSW6000F, FSW6000T specifications

Woods Equipment is a renowned manufacturer of high-quality agricultural and landscaping equipment, and the FSW6000F and FSW6000T are prime examples of their commitment to durable, efficient, and innovative design. These flail mowers are engineered to cater to the needs of both professionals and enthusiasts in the agricultural and landscaping sectors.

The FSW6000F is designed specifically for front mount applications, allowing for remarkable maneuverability and visibility. It is equipped with a robust frame that offers stability and durability, ideal for tackling rough terrain. The mower features a heavy-duty hammer blade design which effectively processes tough vegetation, ensuring a clean cut that enhances the aesthetic of any landscape. With a cutting width of 60 inches, it can cover substantial ground in a single pass, increasing productivity and efficiency.

On the other hand, the FSW6000T is a traditional rear mount flail mower that incorporates the same high-quality construction and functionality. This model is perfect for larger open areas where a rear-mounted option is preferred. It boasts an adjustable cutting height, allowing operators to adapt to various mowing conditions and achieve precise results. The dual-direction cutting capability enhances versatility, making it suitable for a wide range of applications from pasture management to roadside maintenance.

Both models utilize advanced technologies, including a unique suspension system that absorbs shocks and vibrations, ensuring a smoother operation and reduced wear on the machine. The heavy-duty rotor design guarantees uniform cutting even at higher speeds, while the efficient belt drive system minimizes power loss and maximizes performance.

Safety is also a priority with Woods Equipment, and both models are equipped with features such as PTO shields, which help to protect operators during operation. The ease of maintenance is another key characteristic, with readily accessible components allowing for quick service and minimal downtime.

In conclusion, the Woods Equipment FSW6000F and FSW6000T flail mowers represent cutting-edge technology and practical design, tailored to meet the rigorous demands of landscape and agricultural work. With their robust features, smart engineering, and superior performance, they stand out as reliable tools for anyone in need of effective mowing solutions.
Top Page Image Contents