Woods Equipment FSW6000F Assembly, Dealer SET-UP Instructions, Fixed Angle Mount KIT Installation

Page 11

ASSEMBLY

DEALER SET-UP INSTRUCTIONS

Assembly of this sweeper is the responsibility of the WOODS dealer. It should be delivered to the owner completely assembled, lubricated, and adjusted for normal cutting conditions.

FIXED ANGLE MOUNT KIT INSTALLATION

(Figure 2)

Mark Sweeper input driveshaft at 6-1/2 inches from the center cross. Loosen the set screw retaining the rect- angular shaft and remove it from the U-joint. Cut shaft to proper length and reinstall shaft and secure with set screws.

Position broom head in front of mount while inserting broom head input shaft into sleeve assembly (7). Bolt

6--1/2

TRIM INPUT SHAFT

17

16

CD4649A-1

SEE SWEEPSTER® MANUAL

FOR SWEEPSTER® PARTS.

broom head to mount (1) using bolts provided with broom head.

Attach height adjustment lever (2), and lever guide (18) as shown. Pivot bolt (35) and nut (37) must be snug but still allow the lever to rotate.

Secure one end of chain (17) to lug on adjustment lever using washer (40) and cotter pin (30). Attach mid- point of chain to slots in broom head lift arm. Secure chain to slots using pin provided with the broom head.

Attach assist spring (16) to hole in sweeper mount. Attach other end of spring to loose end of chain.

Attach broom and mount to tractor according to instruc- tions on page 12.

2

30

8

407

18

35

37

1

1.

Fixed angle sweeper mount

18.

Lever guide

2.

Lever

30.

Cotter pin

7.

Output shaft

35.

Hex head cap screw

16.

Spring

37.

Elastic stop nut

17.

20 - Link chain

40.

Standard flat washer

MAN0118 (Rev. 12/23/2004)

Assembly 9

 

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MOW’N Machine Sweeper To the Dealer Ii IntroductionIntroduction Table of ContentsPreparation SafetySafety Rules TrainingStorage MaintenanceTransportation Be Careful Safety & Instructional Decals33347E Operation OperationOwner Responsibility Uneven TerrainPRE-OPERATION Check List Lubrication ServiceService Chain AdjustmentDealer SET-UP Instructions AssemblyAssembly Fixed Angle Mount KIT InstallationHoles in Sweepster Shield WAY Angle Mount KITAttaching Sweeper to Tractor WAY Angle Wiring InstructionsIgnition Purple Delivery Check List Dealer Check ListDealer Check Lists PRE-DELIVERY Check ListParts WAY Angle Sweeper AssemblyREF Part Description Part QTY Description Fixed Angle Sweeper Mount KIT AssemblyWAY Angle Sweeper Wire Diagram Appendix Bolt Torque ChartSAE Series Torque Chart Typical Washer InstallationsAbbreviations Bolt Size ChartLimited Warranty What is Covered Woods Equipment Company MAN0118

FSW6000F, FSW6000T specifications

Woods Equipment is a renowned manufacturer of high-quality agricultural and landscaping equipment, and the FSW6000F and FSW6000T are prime examples of their commitment to durable, efficient, and innovative design. These flail mowers are engineered to cater to the needs of both professionals and enthusiasts in the agricultural and landscaping sectors.

The FSW6000F is designed specifically for front mount applications, allowing for remarkable maneuverability and visibility. It is equipped with a robust frame that offers stability and durability, ideal for tackling rough terrain. The mower features a heavy-duty hammer blade design which effectively processes tough vegetation, ensuring a clean cut that enhances the aesthetic of any landscape. With a cutting width of 60 inches, it can cover substantial ground in a single pass, increasing productivity and efficiency.

On the other hand, the FSW6000T is a traditional rear mount flail mower that incorporates the same high-quality construction and functionality. This model is perfect for larger open areas where a rear-mounted option is preferred. It boasts an adjustable cutting height, allowing operators to adapt to various mowing conditions and achieve precise results. The dual-direction cutting capability enhances versatility, making it suitable for a wide range of applications from pasture management to roadside maintenance.

Both models utilize advanced technologies, including a unique suspension system that absorbs shocks and vibrations, ensuring a smoother operation and reduced wear on the machine. The heavy-duty rotor design guarantees uniform cutting even at higher speeds, while the efficient belt drive system minimizes power loss and maximizes performance.

Safety is also a priority with Woods Equipment, and both models are equipped with features such as PTO shields, which help to protect operators during operation. The ease of maintenance is another key characteristic, with readily accessible components allowing for quick service and minimal downtime.

In conclusion, the Woods Equipment FSW6000F and FSW6000T flail mowers represent cutting-edge technology and practical design, tailored to meet the rigorous demands of landscape and agricultural work. With their robust features, smart engineering, and superior performance, they stand out as reliable tools for anyone in need of effective mowing solutions.
Top Page Image Contents