Woods Equipment BH70X, MANO472, BH80X manual Tractor 3-Point Arm Installed

Attach Backhoe to Tractor (Continued)

5.Connect tractor 3-point lower lift arms to the mounting pins on the backhoe. Secure using klik pin (14) and washers (17). Use washers to take up slack between klik pin and 3-point arm. See Figure 7.

6.Connect double top link bar to the tractor top link bracket. Use top link pin supplied with your tractor and sleeve (12). If necessary, separate and adjust top link bars IN or OUT to maintain the backhoe vertical position. See “Tractor Connections” on page 11 for tractor top link specifications.

NOTE: Sleeve (12) is for tractors with a 1-inch top link pin.

7.Torque all hardware to 297 lbs-ft with backhoe mounted to tractor and stabilizers are raised.

12.30067 Sleeve, .765 x 1.0 x 1.69 (not shown)

14.35124 7/16 x 2 Klik pin

17.28539 7/8 SAE Flat washer

17

14

DP1

Figure 7. Tractor 3-Point Arm Installed

Figure 8. 3-Point Mount Installed

8 Installation MAN0472 (9/23/2005)