Woods Equipment BW180HBQ, BW126HBQ manual PN 15922 1000 RPM PN 18866 540 RPM

Page 12
18865--C
15922-C

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

WARNING

DO NOT EXCEED PTO SPEED OF

1000 RPM

PTO speeds higher than 1000 RPM can cause equipment failure and personal injury.

WARNING￿￿￿￿￿￿ ￿￿￿￿￿

￿￿￿ 540￿￿￿￿￿￿￿￿￿￿RPM￿ ￿￿￿"￿￿#￿￿￿￿￿$

￿￿￿￿￿￿￿￿￿ ￿￿￿￿!￿￿

18866-D

5- PN 15922 (1000 RPM)

OR

6- PN 18866 (540 RPM)

8 - PN 18864

DANGER

ROTATING DRIVELINE

CONTACT CAN CAUSE DEATH

KEEP AWAY!

DO NOT OPERATE WITHOUT -

All driveline guards, tractor and equipment shields in place

Drivelines securely attached at both ends

Driveline guards that turn freely on

driveline18864-C

7 - PN 15503

9 - PN 18865

WARNING

FALLING OFF CAN RESULT IN BEING RUN OVER.

„Tractor must be equipped with ROPS (or ROPS CAB) and seat belt. Keep foldable ROPS systems in “locked up” position at all times.

„Buckle Up! Keep seat belt securely fastened.

„Allow no riders.

RAISED EQUIPMENT CAN DROP AND CRUSH.

„Before working underneath, follow all instructions and safety rules in operator’s manual and securely block up all corners of equipment with jack stands.

„Securely blocking prevents equipment dropping from hydraulic leak- down, hydraulic system failures or mechanical component failures.

FALLING OFF OR FAILING TO BLOCK SECURELY CAN RESULT IN SERIOUS INJURY OR DEATH.

11 - PN 19924

DANGER

ROTATING BLADES AND

THROWN OBJECTS

Do not put hands or feet under or into mower when engine is running.

Before mowing, clear area of objects that may be thrown by blade.

Keep bystanders away.

Keep guards in place and in good condition.

BLADE CONTACT OR THROWN OBJECTS CAN CAUSE SERIOUS INJURY OR DEATH.

15503-C

19924-B

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿WARNING￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Check for leaks with cardboard; never use hand.

Before loosening fittings: lower load, release pressure, and

￿be sure oil is cool.

Consult physician immediately if skin penetration occurs.

17 - PN 1004114

DANGER

If shaft connection is visible, shield is missing. Replace shield before

operating equipment.

1004114

12 Safety

MAN0707 (5/30/2008)

 

Image 12
Contents Batwing Introduction To the DealerTable of Contents LEA EL InstructivoSpecifications General InformationBW180HD, BW180HB, BW126HB Free Mower Safety Video SafetyTraining Package for Rotary Mowers/Cutters-English Training Package for Rotary Mowers/Cutters-English/SpanishSafety Rules InstallationTraining PreparationTransportation OperationMaintenance Storage Safety & Instructional Decals Be CarefulPN 1006348 Located on Wheel Rims 1000 RPM PN 15922 1000 RPM PN 18866 540 RPMSafety Connecting Cutter to Tractor OperationOperation Hydraulic ConnectionCutting Height Adjustment Interference CheckCV Driveline Turning Limits Tractor OperationCutter Operation Mowing TipsShredding Transporting Lock-UpWing Lock-Up Center Section Lock-UpPRE-OPERATION Check List Owners ResponsibilityOwner Service Owner ServiceBlocking Method Lubrication Gearbox LubricationDriveline Lubrication Blade Installation Figure Seasonal LubricationBlades Blade Removal FigureSlip Clutch Adjustment Figure Blade SharpeningCleaning Shielding RepairServicing Tires Safely Troubleshooting TroubleshootingDealer Service Dealer ServiceGearbox Maintenance Seal Replacement FigureDisassembly Figure Gearbox RepairRemoval from Cutter Figure Reinstallation GearboxDisassembly AssemblySplitter Gearbox Repair Figure Removal from Cutter Reinstallation on Cutter Check GearboxCrossbar Removal Crossbar RemovalCrossbar Installation Joint DisassemblyUniversal Joint Repair Joint Assembly Assembly Assembly InstructionsDealer SET-UP Instructions Install Height Adjustment Cylinder BW180HD Install SMV Emblem BW180HDInstall Wheel and Hub BW180HD Install Tongue BW180HDInstall 3-Joint Drive 540 RPM Only BW180HD Joint Drive InstallationInstall CV Drive BW180HD- Optional Install Wing BW180HDInstall Wing Cylinder & Lock-up Bar BW180HD Install Wing Wheel and Hub All Models Left Wing Lock-Up Bar InstalledInstall Wing Wheel Yoke Adjustment Link BW180HD Install Wing Driveline BW180HDInstall Hose Kit BW180HD Winch Kit Installation OptionalInstall Chain or Belt Shielding BW180HD Chain Shielding Installation Center SectionChain Shielding Installation Right Wing Shown Belt Shielding Installation Right Wing Dealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListMAN0805 4/30/2009 Parts BW180HD, BW180HDQ BW180HB, BW180HBQ BW126HB, BW126HBQMain Frame Assembly Front Section Part QTY Description BW180HD Main Frame Assembly Rear Section Tire & hub see BW180HB Main Frame Assembly Rear Section REF Part QTY Description Wing Assembly See Wing & Center Gearbox Assembly Center Right Wing Left Wing DescriptionSplitter Gearbox Assembly Gear, 540 rpmCenter Deck Drive Assembly Front Drive Assembly Equal Angle Rear Drive Assembly Equal Angle RPM & 1000 RPM Front CV Drive Wing Drive Assembly Bolt Wheel & Tire Assembly 1027468 Rubber Shielding Wing Front & Rear Standard on BW180 Models Chain Shielding Center Section Front & Rear Single ROW Double ROWChain Shielding Wing Front & Rear Single ROWHydraulic Cylinders Crossbar Puller Optional Hydraulic Cylinder Stroke Control KITBW126HB / BW126HBQ Weight BOX Assembly Optional Winch Kit Installation Winch KIT OptionalWinch Kit Operation Bolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsIndex IndexWarranty Rev /23/2005 Woods Equipment Company

BW126HBQ, BW126HB, BW180HBQ specifications

Woods Equipment is renowned for its dedication to high-quality agricultural equipment, and the BW126HB, BW180HBQ, and BW126HBQ models exemplify this commitment. These models are designed for various applications, ensuring they meet diverse farming and landscaping needs.

The Woods BW126HB is a robust and versatile brushcutting mower designed for heavy-duty use. It features a 12-foot working width, enabling operators to cover large areas quickly and efficiently. This model is equipped with a powerful hydraulic drive system that enhances performance and reduces maintenance needs. The durable design includes a reinforced frame and high-strength cutting blades, ensuring exceptional performance even in challenging conditions. The adjustable cutting height allows for customizing the mowing experience, making it suitable for different terrains and vegetation types.

Next, the BW180HBQ model is geared towards high-capacity operations. With an impressive 15-foot working width, it is ideal for large-scale land management tasks. This model features an innovative Quick Attach System, allowing for fast attachment and detachment from various tractors. The advanced cutting technology employed in the BW180HBQ ensures a clean cut, promoting healthier growth of the remaining grass. Additionally, its steel construction and corrosion-resistant coating enhance durability and longevity, making it a wise investment for any agricultural operation.

The Woods BW126HBQ combines the benefits of the BW126HB with added versatility. This model is a quad-mount design that provides operators with improved stability and control. Equipped with a 12-foot cutting width, it seamlessly handles larger areas while still being able to navigate tight spots. Its dual hydraulic motors enable enhanced power efficiency, reducing fuel consumption while maximizing productivity. The innovative blade system incorporated in the BW126HBQ allows for superior mulching capabilities, further enhancing its utility for land management and landscaping.

All three models showcase Woods Equipment's dedication to user-friendly features. Each mower is designed with easy-to-reach controls and intuitive operation, ensuring a smooth experience for operators of all skill levels. The incorporation of advanced technologies, such as enhanced cutting efficiency and reduced noise operation, showcases Woods’ commitment to innovation.

In summary, the Woods BW126HB, BW180HBQ, and BW126HBQ models are exemplary options for those seeking high-performing brushcutting solutions. Each model has unique features and capabilities, making them suitable for various agricultural tasks. Their durability, efficiency, and user-friendly designs highlight Woods Equipment's mission to provide exceptional machinery for modern farming and landscaping needs.