Gearbox Lubrication

1.	Driveline U-joint	10 Hours	7.	Gearbox (above lower	Daily
2.	Telescoping shaft	10 Hours		line on dipstick)
3.	Carrier bearing block	40 Hours	8.	Tongue pivot	40 Hours
4.	CV body assembly	10 hours	9.	Wheel yoke pivot	40 Hours
	(10 pumps minimum)		10.	Tailwheel spindle	20 Hours
5.	Driveline shield	10 Hours	11.	Turnbuckle	40 Hours
6.	Splined yoke	10 Hours	12.	Tongue pivot	40 Hours

Figure 5. Jackstand Placement and Lubrication Points

LUBRICATION

Do not let excess grease collect on or around parts, particularly when operating in sandy areas.

See Figure 5 for lubrication points and frequency or lubrication based on normal operating conditions. Severe or unusual conditions may require more fre- quent lubrication.

Use a lithium grease of #2 consistency with a MOLY (molybdenum disulfide) additive for all locations unless otherwise noted. Be sure to clean fittings thoroughly before attaching grease gun. One good pump of most guns is sufficient when the lubrication schedule is fol- lowed.

For gearbox, use a high quality gear oil with a viscosity index of 80W or 90W and an API service rating of GL–

4 or –5 in gearboxes. Fill gearbox until oil runs out the side plug on gearbox. Check gearbox daily for evi- dence of leakage, and contact your dealer if leakage occurs. Use sealant on vent plug threads during instal- lation. Check vent plug periodically and clean if it does not relieve pressure.

Driveline Lubrication

1.Lubricate the driveline slip joint every eight operating hours. Failure to maintain proper lubrication could result in damage to U-joints, gearbox, and driveline.

2.Lower cutter to ground, disconnect driveline from tractor PTO shaft, and slide halves apart but do not disconnect from each other.

3.Apply a bead of grease completely around male half where it meets female half. Slide drive halves over each other several times to distribute grease.

20 Owner Service

(Rev. 10/23/2009) MAN0805 (4/30/2009)

BW126HBQ, BW126HB, BW180HBQ specifications

Woods Equipment is renowned for its dedication to high-quality agricultural equipment, and the BW126HB, BW180HBQ, and BW126HBQ models exemplify this commitment. These models are designed for various applications, ensuring they meet diverse farming and landscaping needs.

The Woods BW126HB is a robust and versatile brushcutting mower designed for heavy-duty use. It features a 12-foot working width, enabling operators to cover large areas quickly and efficiently. This model is equipped with a powerful hydraulic drive system that enhances performance and reduces maintenance needs. The durable design includes a reinforced frame and high-strength cutting blades, ensuring exceptional performance even in challenging conditions. The adjustable cutting height allows for customizing the mowing experience, making it suitable for different terrains and vegetation types.

Next, the BW180HBQ model is geared towards high-capacity operations. With an impressive 15-foot working width, it is ideal for large-scale land management tasks. This model features an innovative Quick Attach System, allowing for fast attachment and detachment from various tractors. The advanced cutting technology employed in the BW180HBQ ensures a clean cut, promoting healthier growth of the remaining grass. Additionally, its steel construction and corrosion-resistant coating enhance durability and longevity, making it a wise investment for any agricultural operation.

The Woods BW126HBQ combines the benefits of the BW126HB with added versatility. This model is a quad-mount design that provides operators with improved stability and control. Equipped with a 12-foot cutting width, it seamlessly handles larger areas while still being able to navigate tight spots. Its dual hydraulic motors enable enhanced power efficiency, reducing fuel consumption while maximizing productivity. The innovative blade system incorporated in the BW126HBQ allows for superior mulching capabilities, further enhancing its utility for land management and landscaping.

All three models showcase Woods Equipment's dedication to user-friendly features. Each mower is designed with easy-to-reach controls and intuitive operation, ensuring a smooth experience for operators of all skill levels. The incorporation of advanced technologies, such as enhanced cutting efficiency and reduced noise operation, showcases Woods’ commitment to innovation.

In summary, the Woods BW126HB, BW180HBQ, and BW126HBQ models are exemplary options for those seeking high-performing brushcutting solutions. Each model has unique features and capabilities, making them suitable for various agricultural tasks. Their durability, efficiency, and user-friendly designs highlight Woods Equipment's mission to provide exceptional machinery for modern farming and landscaping needs.