Woods Equipment BW126HBQ, BW180HBQ manual Install Wheel and Hub BW180HD, Install Tongue BW180HD

Page 35

Install Wheel and Hub (BW180HD)

1.Insert wheel hub into outside of wheel yoke arm (1) and align holes.

2.Secure into position using cap screw (54) and flanged lock nut (55).

3.Attach wheel to hub using five lug nuts. Install the chamfered side of the lug nut toward the inside for steel rim for pneumatic tires and rims. Tighten to 75 lbs-ft. Check that tire air pressure is a maximum of 40 psi.

NOTE: Install the flat side of the nut toward the inside for solid tires and aircraft tires (shown).

4.Install optional dual wheel and hub to inside of wheel yoke arm.

NOTE: Pneumatic, notat, and airplane tires are available for this cutter. See page 62 for parts list.

1.Center wheel yoke arm

54. 1/2" NC x 3" HHCS GR5

55. 1/2" NC Flange lock nut

Figure 26. Center Section Wheel and

Hub Installation

Install Tongue (BW180HD)

1.Attach tongue (24) to center section using two tongue pivot pins (33) and cotter pins (70).

2.Attach attitude rod (6) to lug on tongue and secure with clevis pin (34), washer (35), and cotter pin (66).

3.Attach parking jack (22) to the side of the tongue.

4.Attach safety chain (8) to the bottom of center gusset and secure with cap screw (40), washer (38), and lock nut (39).

6.Attitude rod

8.Safety chain

22.Parking jack

24.Tongue

33.Tongue pivot pin

34.Clevis pin, 1" x 2.26"

35.Washer, flat 1"

38.Washer, flat 3/4" x 2" x 3/8"

39.3/4" NC Lock nut

40.3/4" NC x 2-1/2" HHCS GR5

66.Cotter pin, 1/4" x 1-1/2"

70.Cotter pin, 3/16"x 1-1/2"

Figure 27. Tongue Installation

MAN0805 (4/30/2009)

Assembly 35

 

 

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Batwing To the Dealer IntroductionLEA EL Instructivo Table of ContentsBW180HD, BW180HB, BW126HB SpecificationsGeneral Information Safety Free Mower Safety VideoTraining Package for Rotary Mowers/Cutters-English/Spanish Training Package for Rotary Mowers/Cutters-EnglishPreparation Safety RulesInstallation TrainingOperation TransportationMaintenance Storage PN 1006348 Located on Wheel Rims Safety & Instructional DecalsBe Careful PN 15922 1000 RPM PN 18866 540 RPM 1000 RPMSafety Hydraulic Connection Connecting Cutter to TractorOperation OperationTractor Operation Cutting Height AdjustmentInterference Check CV Driveline Turning LimitsShredding Cutter OperationMowing Tips Center Section Lock-Up TransportingLock-Up Wing Lock-UpOwners Responsibility PRE-OPERATION Check ListBlocking Method Owner ServiceOwner Service Driveline Lubrication LubricationGearbox Lubrication Blade Removal Figure Blade Installation FigureSeasonal Lubrication BladesBlade Sharpening Slip Clutch Adjustment FigureServicing Tires Safely CleaningShielding Repair Troubleshooting TroubleshootingSeal Replacement Figure Dealer ServiceDealer Service Gearbox MaintenanceRemoval from Cutter Figure Disassembly FigureGearbox Repair Gearbox ReinstallationSplitter Gearbox Repair Figure Removal from Cutter DisassemblyAssembly Check Gearbox Reinstallation on CutterCrossbar Removal Crossbar RemovalUniversal Joint Repair Crossbar InstallationJoint Disassembly Joint Assembly Dealer SET-UP Instructions AssemblyAssembly Instructions Install SMV Emblem BW180HD Install Height Adjustment Cylinder BW180HDInstall Tongue BW180HD Install Wheel and Hub BW180HDJoint Drive Installation Install 3-Joint Drive 540 RPM Only BW180HDInstall Wing Cylinder & Lock-up Bar BW180HD Install CV Drive BW180HD- OptionalInstall Wing BW180HD Left Wing Lock-Up Bar Installed Install Wing Wheel and Hub All ModelsWinch Kit Installation Optional Install Wing Wheel Yoke Adjustment Link BW180HDInstall Wing Driveline BW180HD Install Hose Kit BW180HDChain Shielding Installation Center Section Install Chain or Belt Shielding BW180HDChain Shielding Installation Right Wing Shown Belt Shielding Installation Right Wing Delivery Check List Dealer Check ListsDealer Check Lists PRE-DELIVERY Check ListMAN0805 4/30/2009 BW180HD, BW180HDQ BW180HB, BW180HBQ BW126HB, BW126HBQ PartsMain Frame Assembly Front Section Part QTY Description BW180HD Main Frame Assembly Rear Section Tire & hub see BW180HB Main Frame Assembly Rear Section REF Part QTY Description Wing Assembly See Wing & Center Gearbox Assembly Right Wing Left Wing Description CenterGear, 540 rpm Splitter Gearbox AssemblyCenter Deck Drive Assembly Front Drive Assembly Equal Angle Rear Drive Assembly Equal Angle RPM & 1000 RPM Front CV Drive Wing Drive Assembly Bolt Wheel & Tire Assembly 1027468 Rubber Shielding Wing Front & Rear Standard on BW180 Models Single ROW Double ROW Chain Shielding Center Section Front & RearSingle ROW Chain Shielding Wing Front & RearHydraulic Cylinders Hydraulic Cylinder Stroke Control KIT Crossbar Puller OptionalBW126HB / BW126HBQ Weight BOX Assembly Optional Winch Kit Operation Winch Kit InstallationWinch KIT Optional Metric Series Bolt Torque ChartSAE Series Torque Chart AppendixAbbreviations Bolt Size ChartIndex IndexWarranty Rev /23/2005 Woods Equipment Company

BW126HBQ, BW126HB, BW180HBQ specifications

Woods Equipment is renowned for its dedication to high-quality agricultural equipment, and the BW126HB, BW180HBQ, and BW126HBQ models exemplify this commitment. These models are designed for various applications, ensuring they meet diverse farming and landscaping needs.

The Woods BW126HB is a robust and versatile brushcutting mower designed for heavy-duty use. It features a 12-foot working width, enabling operators to cover large areas quickly and efficiently. This model is equipped with a powerful hydraulic drive system that enhances performance and reduces maintenance needs. The durable design includes a reinforced frame and high-strength cutting blades, ensuring exceptional performance even in challenging conditions. The adjustable cutting height allows for customizing the mowing experience, making it suitable for different terrains and vegetation types.

Next, the BW180HBQ model is geared towards high-capacity operations. With an impressive 15-foot working width, it is ideal for large-scale land management tasks. This model features an innovative Quick Attach System, allowing for fast attachment and detachment from various tractors. The advanced cutting technology employed in the BW180HBQ ensures a clean cut, promoting healthier growth of the remaining grass. Additionally, its steel construction and corrosion-resistant coating enhance durability and longevity, making it a wise investment for any agricultural operation.

The Woods BW126HBQ combines the benefits of the BW126HB with added versatility. This model is a quad-mount design that provides operators with improved stability and control. Equipped with a 12-foot cutting width, it seamlessly handles larger areas while still being able to navigate tight spots. Its dual hydraulic motors enable enhanced power efficiency, reducing fuel consumption while maximizing productivity. The innovative blade system incorporated in the BW126HBQ allows for superior mulching capabilities, further enhancing its utility for land management and landscaping.

All three models showcase Woods Equipment's dedication to user-friendly features. Each mower is designed with easy-to-reach controls and intuitive operation, ensuring a smooth experience for operators of all skill levels. The incorporation of advanced technologies, such as enhanced cutting efficiency and reduced noise operation, showcases Woods’ commitment to innovation.

In summary, the Woods BW126HB, BW180HBQ, and BW126HBQ models are exemplary options for those seeking high-performing brushcutting solutions. Each model has unique features and capabilities, making them suitable for various agricultural tasks. Their durability, efficiency, and user-friendly designs highlight Woods Equipment's mission to provide exceptional machinery for modern farming and landscaping needs.
Top Page Image Contents