Shift Lever, CLUTCH-BRAKE Pedal | Yard Machines 840 Thru 849

AMMETER (If Equipped)

The ammeter registers the rate of battery charge or discharge. The ammeter will register on the discharging side when starting the engine. It should register on the opposite side (charging) when the engine is running in the fast position until the battery is completely charged. With a fully charged battery or with the engine idling, the ammeter will not show a charge. See Figure 18.

SHIFT LEVER

The shift lever is located in the center of the console and has four positions, HIGH, LOW, NEUTRAL and REVERSE. See Figure 19. The clutch-brake pedal must be depressed and the garden tractor must not be moving when shifting gears. Do not force the shift lever. Release the clutch-brake pedal slightly to line up the shifting collar in the transmission. Then try to shift gears.

Choke	Ignition
Throttle	Switch

Clutch-

Brake

Pedal

Lift

AmmeterLever

PTO

Lever

Models 820, 825, 840 and 845

Ammeter

Choke

Throttle

Clutch-

Brake

Pedal Ignition

Switch

Lift

PTOLever

Lever

Models 82A and 84A

Figure 18

CLUTCH-BRAKE PEDAL

The clutch-brake pedal is located on the left side of the tractor. See Figure 18. Depressing the clutch-brake pedal partway disengages the clutch. Pressing the pedal all the way down disengages the clutch and engages the disc brake.

NOTE: The clutch-brake pedal must be depressed to start the engine.

PARKING BRAKE

To set the parking brake, depress the clutch-brake pedal and pull up the parking brake knob. It will stay in the raised position. To release the parking brake, depress and release the clutch-brake pedal. See Figure 19.

NOTE: The parking brake must be set if the operator leaves the seat with the engine running.

Parking

Shift

Brake Lever

Knob

Figure 19

SPEED CONTROL LEVER

The speed control lever is located on the left fender. It allows you to regulate the ground speed of the garden tractor. See Figure 20. To select the ground speed, depress clutch pedal. Push speed control lever outward and move backward to slow garden tractor, move forward to increase speed. When desired speed has been obtained, release lever in that position. Whenever clutch is engaged, unit will automatically go to the pre- set speed.