Yard Machines 570 manual Controls, Recoil Starter, Primer, Blade Control Handle

Page 13

•Insert axle bolt with washers through wheel assembly. See Figure 12 inset.

•Place the small bell washer on the other end of the axle bolt with the crown side towards the wheel.

•Slide the wheel assembly with all the hardware through one of the three holes on the handle bracket. See Figure 12. Remember to insert the axle bolt and the wheel assembly with hardware through the hole at the same relative position as the front wheels.

•Secure the axle bolt with a bell washer and hex nut as shown in Figure 12. Attach the other rear wheel in the same manner.

•Remove blocks and put the mower firmly on level ground.

SECTION 7: CONTROLS

Read this owner’s manual and safety rules before operating your lawn mower. Compare the illustrations in Figure 13 with your lawn mower to familiarize yourself with the location of various controls and adjustments.

Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.

Blade Control

Handle

Recoil

Starter

Primer

Chute

Deflector

Spark Plug Wire

FIGURE 13

Recoil Starter

The recoil starter is attached to the handle. Stand behind the unit and pull the recoil starter to start the unit.

Primer

The primer is used to pump gas into the carburetor. Use it to start a cold engine, but do not use it to restart a warm engine after short shutdown. See Figure 13 inset above for location.

Blade Control Handle

WARNING: This control mechanism is a safety device. Never attempt to bypass its operations.

The blade control handle is located on the upper handle of the mower. The blade control handle must be depressed in order to operate the unit. Release the blade control handle to stop the engine and the blade.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents OPERATOR’S Manual Table of Contents General Operation Important Safe Operation PracticesChildren Slope Gauge Unpacking Finding Model NumberRemoving Unit From Carton Loose PartsHardware Pack Disconnecting Spark Plug Setting UP MowerTools Required Attaching Lower HandleAttaching Brake Cable Attaching Upper HandleAttaching snap fitting Attaching Z FittingAttaching Blade Control Handle Attaching Chute Deflector Attaching Starter RopeAttaching front wheel Attaching WheelsAttaching Rear Wheels Recoil Starter ControlsPrimer Blade Control HandleGas And Oil Fill-Up OperationStarting Engine OilAdjusting Cutting Height MaintenanceCleaning Mower Stopping EngineEngine Maintenance Service & AdjustmentsLubrication Blade CareTo Remove Blade Replacing Rear FlapTo Replace Blade To Sharpen BladeOFF-SEASON Storage Adjusting CarburetorMower EngineProblem Possible Cause Corrective Action TROUBLE-SHOOTING GuideYour Notes Shroud Chart Repair Parts Page Other Warranties MANUFACTURER’S Limited Warranty for

570 specifications

The Yard Machines 570 is a robust and versatile lawn mower designed for both residential and light commercial use. Known for its reliable performance, it offers several features tailored to meet the needs of homeowners and landscapers alike.

One of the standout features of the Yard Machines 570 is its powerful engine. Equipped with a reliable 140cc OHV engine, it provides the necessary torque and power to tackle even the toughest lawns. This engine is designed for easy starting, ensuring that users can get to work quickly without the frustration of a cumbersome ignition process.

Another significant characteristic of the Yard Machines 570 is its adjustable cutting height. With multiple height settings, users can customize the mowing experience to their specific lawn needs. This flexibility allows for optimal cutting, whether navigating through thick grass or achieving a perfectly manicured finish.

The design of the Yard Machines 570 is also noteworthy. Its low-profile design enhances maneuverability, allowing gardeners to navigate around obstacles such as trees and flower beds with ease. Additionally, the mower comes equipped with a 21-inch cutting deck, ensuring efficient coverage and reduced time spent mowing.

Technologically, the Yard Machines 570 integrates a reliable bagging system, enabling effective collection of grass clippings. This feature not only keeps the lawn tidy but also allows for easy disposal or composting of organic waste. For those who prefer a natural approach, the mower also supports side discharge, spreading clippings back onto the lawn for added fertilization.

Durability is another hallmark of the Yard Machines 570. Constructed with a sturdy steel frame and deck, it is designed to withstand the rigors of regular use. The wheels are built for stability and ease of movement, featuring a robust design that can handle various terrains.

Maintenance is straightforward with the Yard Machines 570, as it requires minimal effort to keep in optimal condition. With easy access to the engine and other key components, users can perform routine checks and maintenance tasks without hassle.

In conclusion, the Yard Machines 570 stands out for its blend of power, efficiency, and user-friendly features. Whether tackling a small yard or maintaining larger spaces, it provides a reliable and effective solution for lawn care needs, combining modern technology with practical design. This mower is an excellent choice for those seeking reliable performance and ease of use in their outdoor maintenance routine.
Top Page Image Contents