Yard Machines 570 manual Finding Model Number, Unpacking, Removing Unit From Carton, Loose Parts

Page 6

SECTION 3: FINDING MODEL NUMBER

This owner’s guide is an important part of your new Yard-Machine lawn mower. It will help you to assemble, prepare and maintain your mower. Please read and understand what it says.

Before you start assembling the mower for its first use, please locate its model plate and copy the information on to this owner’s guide. The information on the model plate is very important if you need help from your nearest service center or the Yard-Machine customer support department.

•Every mower has a model plate. You can locate it by standing behind the unit in the operating position and looking down at the cutting deck.

•The model plate will look like Figure 1.

This is where mower model number will be.

XXX-X-XXX-X-XXX XXXXXXXXXXX

This is where mower serial number will be.

Copy the model number here:

MTD PRODUCTS INC Copy the serial number here:

CLEVELAND, OHIO 44136

FIGURE 1

SECTION 4: UNPACKING

Removing Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts included with the unit. A list of loose parts is given below. It is recommended that you compare this list with the loose parts included in the carton and identify each part before starting to assemble the unit.

•Cut along dotted lines and lay carton down flat. Remove packing material.

•Roll or slide unit out of carton. Check carton thoroughly for loose parts. Make sure that no part is missing.

NOTE: Make sure not to crimp the cables while removing the loose parts or the entire unit from the carton.

NOTE: Reference to right or left hand side of the mower and/or front or behind the mower is observed from the operating position.

Loose Parts

1.Upper handle

2.Lower handle

3.Hardware pack (See following page for an illustrated list of the hardware pack.)

4.Rear hi-wheel

5.Front wheel

NOTE: Remember that all hardware necessary for assembling the mower is contained in the hardware pack, and is identified in the following section.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Table of Contents Important Safe Operation Practices General OperationChildren Slope Gauge Removing Unit From Carton Finding Model NumberUnpacking Loose PartsHardware Pack Tools Required Setting UP MowerDisconnecting Spark Plug Attaching Lower HandleAttaching snap fitting Attaching Upper HandleAttaching Brake Cable Attaching Z FittingAttaching Blade Control Handle Attaching Starter Rope Attaching Chute DeflectorAttaching Wheels Attaching front wheelAttaching Rear Wheels Primer ControlsRecoil Starter Blade Control HandleStarting Engine OperationGas And Oil Fill-Up OilCleaning Mower MaintenanceAdjusting Cutting Height Stopping EngineLubrication Service & AdjustmentsEngine Maintenance Blade CareTo Replace Blade Replacing Rear FlapTo Remove Blade To Sharpen BladeMower Adjusting CarburetorOFF-SEASON Storage EngineTROUBLE-SHOOTING Guide Problem Possible Cause Corrective ActionYour Notes Shroud Chart Repair Parts Page MANUFACTURER’S Limited Warranty for Other Warranties

570 specifications

The Yard Machines 570 is a robust and versatile lawn mower designed for both residential and light commercial use. Known for its reliable performance, it offers several features tailored to meet the needs of homeowners and landscapers alike.

One of the standout features of the Yard Machines 570 is its powerful engine. Equipped with a reliable 140cc OHV engine, it provides the necessary torque and power to tackle even the toughest lawns. This engine is designed for easy starting, ensuring that users can get to work quickly without the frustration of a cumbersome ignition process.

Another significant characteristic of the Yard Machines 570 is its adjustable cutting height. With multiple height settings, users can customize the mowing experience to their specific lawn needs. This flexibility allows for optimal cutting, whether navigating through thick grass or achieving a perfectly manicured finish.

The design of the Yard Machines 570 is also noteworthy. Its low-profile design enhances maneuverability, allowing gardeners to navigate around obstacles such as trees and flower beds with ease. Additionally, the mower comes equipped with a 21-inch cutting deck, ensuring efficient coverage and reduced time spent mowing.

Technologically, the Yard Machines 570 integrates a reliable bagging system, enabling effective collection of grass clippings. This feature not only keeps the lawn tidy but also allows for easy disposal or composting of organic waste. For those who prefer a natural approach, the mower also supports side discharge, spreading clippings back onto the lawn for added fertilization.

Durability is another hallmark of the Yard Machines 570. Constructed with a sturdy steel frame and deck, it is designed to withstand the rigors of regular use. The wheels are built for stability and ease of movement, featuring a robust design that can handle various terrains.

Maintenance is straightforward with the Yard Machines 570, as it requires minimal effort to keep in optimal condition. With easy access to the engine and other key components, users can perform routine checks and maintenance tasks without hassle.

In conclusion, the Yard Machines 570 stands out for its blend of power, efficiency, and user-friendly features. Whether tackling a small yard or maintaining larger spaces, it provides a reliable and effective solution for lawn care needs, combining modern technology with practical design. This mower is an excellent choice for those seeking reliable performance and ease of use in their outdoor maintenance routine.
Top Page Image Contents