Maintenance, Stopping Engine, Cleaning Mower

•To prevent the unit from sliding, place your foot firmly against the tire.

•Move throttle control all the way forward. This step is not applicable in case of mowers with fixed throttle.

•Push primer three times. Wait about two seconds between each push. In cold weather around 55o F or below, prime five times. Do not prime to restart a warm engine after a short shutdown.

•Hold the control lever against the upper handle and pull starter rope out slowly until engine reaches the start of compression cycle (rope will pull slightly harder at this point). Let the rope rewind slowly. Pull rope with a rapid, continuous, full arm stroke. Keeping a firm grip on the control lever, let the rope return to the starter slowly.

•After the engine starts, move throttle control to desired engine speed.

Stopping Engine

•Release blade control handle to stop the engine and the blade.

•Disconnect spark plug wire and move away from spark plug to prevent accidental starting.

Using Your Lawn Mower

•Do not operate the mower without the discharge chute properly installed and tightly secured.

•Be sure that the lawn is clear of stones, sticks, wire, or other objects which could damage lawn mower or engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal injury to the operator and others.

•For best results, do not cut wet grass because it tends to stick to the underside of the mower, preventing proper discharge of grass clippings, and could cause you to slip and fall. New grass, thick grass or wet grass may require a narrower cut. Blade speed should be adjusted to the condition of the lawn.

•The best mowing pattern is one that allows the clippings to discharge towards the uncut part of the lawn. This permits recutting of the clippings to further pulverize them. When cutting high weeds, discharge towards cut portion, then recut at right angles to first direction.

•For a healthy lawn, always cut off one-third or less of the total length of the grass. Lawn should be trimmed in fall as long as there is growth.

•This mower is designed to run at full throttle to give you the best cut and do the most effective job of bagging the cut grass.

WARNING: If you strike a foreign object, stop the engine. Remove spark plug wire from spark plug,

thoroughly inspect the mower for any damage. Repair the damage before restarting and operating the mower. Extensive vibration of the mower during operation is an indication of damage. The unit should be promptly inspected and repaired.

Adjusting Cutting Height

Refer to height adjustments section of this manual on page 17 and 18 for instruction on how to adjust the cutting height and the handle height.

•For best results in mowing, keep the cutting height position high until it is determined which height is best for your lawn.

SECTION 8: MAINTENANCE

WARNING: Always stop the engine and disconnect the spark plug wire before performing any maintenance work or adjustments on your lawn mower.

Cleaning Mower

The underside of the mower deck should be cleaned after each use to prevent any build-up of grass clippings, leaves, dirt, or other debris. If this debris is allowed to accumulate, it will result in rust and corrosion.

•Disconnect spark plug wire.

•Drain the gasoline from the lawn mower, or place a piece of plastic under the gas cap.

570 specifications

The Yard Machines 570 is a robust and versatile lawn mower designed for both residential and light commercial use. Known for its reliable performance, it offers several features tailored to meet the needs of homeowners and landscapers alike.

One of the standout features of the Yard Machines 570 is its powerful engine. Equipped with a reliable 140cc OHV engine, it provides the necessary torque and power to tackle even the toughest lawns. This engine is designed for easy starting, ensuring that users can get to work quickly without the frustration of a cumbersome ignition process.

Another significant characteristic of the Yard Machines 570 is its adjustable cutting height. With multiple height settings, users can customize the mowing experience to their specific lawn needs. This flexibility allows for optimal cutting, whether navigating through thick grass or achieving a perfectly manicured finish.

The design of the Yard Machines 570 is also noteworthy. Its low-profile design enhances maneuverability, allowing gardeners to navigate around obstacles such as trees and flower beds with ease. Additionally, the mower comes equipped with a 21-inch cutting deck, ensuring efficient coverage and reduced time spent mowing.

Technologically, the Yard Machines 570 integrates a reliable bagging system, enabling effective collection of grass clippings. This feature not only keeps the lawn tidy but also allows for easy disposal or composting of organic waste. For those who prefer a natural approach, the mower also supports side discharge, spreading clippings back onto the lawn for added fertilization.

Durability is another hallmark of the Yard Machines 570. Constructed with a sturdy steel frame and deck, it is designed to withstand the rigors of regular use. The wheels are built for stability and ease of movement, featuring a robust design that can handle various terrains.

Maintenance is straightforward with the Yard Machines 570, as it requires minimal effort to keep in optimal condition. With easy access to the engine and other key components, users can perform routine checks and maintenance tasks without hassle.

In conclusion, the Yard Machines 570 stands out for its blend of power, efficiency, and user-friendly features. Whether tackling a small yard or maintaining larger spaces, it provides a reliable and effective solution for lawn care needs, combining modern technology with practical design. This mower is an excellent choice for those seeking reliable performance and ease of use in their outdoor maintenance routine.