Yard Machines 570 manual Attaching Upper Handle, Attaching Brake Cable, Attaching snap fitting

Page 9

Attaching Upper Handle

•Place the upper handle in position over the lower handle aligning the lowest hole on the upper handle with the top hole on the lower handle. Make sure that the blade control handle is at the top.

•Insert carriage bolt through the upper handle as shown in Figure 4 and secure with a hex nut and lock washer.

•Secure the upper handle to the lower handle on the other side with the other set of carriage bolt, cupped washer and hex nut.

Insert carriage bolt here

Insert lock washer & hex nut here

FIGURE 4

Attaching Brake Cable

Attaching snap fitting

The brake cable is attached to the engine at the factory; the free end requires assembly.

•Route the cable under the lower handle and pull the free end up along the upper handle.

•Locate the snap fitting on the cable. The shaft inside this snap fitting fits into the middle hole on the inside of the left upper handle. Position the snap fitting so that the shaft is aligned with the hole. Press the snap fitting in place. See Figure 5.

Snap Fitting

Upper Handle

Brake Cable

FIGURE 5

Attaching Z Fitting

Make sure that the hole on the control handle is on the left side of the upper handle. If not, reattach the control handle following instructions below. Also check and make sure that the control handle touches the upper handle when squeezed against it. (At this position, the blade is engaged.)

•Pull the Z end of the cable up and insert into the hole on the control handle from the inside. See Figure 6.

NOTE: The cable should have enough slack that when you squeeze the control handle against the upper handle, the two handles touch.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents OPERATOR’S Manual Table of Contents General Operation Important Safe Operation PracticesChildren Slope Gauge Unpacking Finding Model NumberRemoving Unit From Carton Loose PartsHardware Pack Disconnecting Spark Plug Setting UP MowerTools Required Attaching Lower HandleAttaching Brake Cable Attaching Upper HandleAttaching snap fitting Attaching Z FittingAttaching Blade Control Handle Attaching Chute Deflector Attaching Starter RopeAttaching Wheels Attaching front wheelAttaching Rear Wheels Recoil Starter ControlsPrimer Blade Control HandleGas And Oil Fill-Up OperationStarting Engine OilAdjusting Cutting Height MaintenanceCleaning Mower Stopping EngineEngine Maintenance Service & AdjustmentsLubrication Blade CareTo Remove Blade Replacing Rear FlapTo Replace Blade To Sharpen BladeOFF-SEASON Storage Adjusting CarburetorMower EngineProblem Possible Cause Corrective Action TROUBLE-SHOOTING GuideYour Notes Shroud Chart Repair Parts Page Other Warranties MANUFACTURER’S Limited Warranty for

570 specifications

The Yard Machines 570 is a robust and versatile lawn mower designed for both residential and light commercial use. Known for its reliable performance, it offers several features tailored to meet the needs of homeowners and landscapers alike.

One of the standout features of the Yard Machines 570 is its powerful engine. Equipped with a reliable 140cc OHV engine, it provides the necessary torque and power to tackle even the toughest lawns. This engine is designed for easy starting, ensuring that users can get to work quickly without the frustration of a cumbersome ignition process.

Another significant characteristic of the Yard Machines 570 is its adjustable cutting height. With multiple height settings, users can customize the mowing experience to their specific lawn needs. This flexibility allows for optimal cutting, whether navigating through thick grass or achieving a perfectly manicured finish.

The design of the Yard Machines 570 is also noteworthy. Its low-profile design enhances maneuverability, allowing gardeners to navigate around obstacles such as trees and flower beds with ease. Additionally, the mower comes equipped with a 21-inch cutting deck, ensuring efficient coverage and reduced time spent mowing.

Technologically, the Yard Machines 570 integrates a reliable bagging system, enabling effective collection of grass clippings. This feature not only keeps the lawn tidy but also allows for easy disposal or composting of organic waste. For those who prefer a natural approach, the mower also supports side discharge, spreading clippings back onto the lawn for added fertilization.

Durability is another hallmark of the Yard Machines 570. Constructed with a sturdy steel frame and deck, it is designed to withstand the rigors of regular use. The wheels are built for stability and ease of movement, featuring a robust design that can handle various terrains.

Maintenance is straightforward with the Yard Machines 570, as it requires minimal effort to keep in optimal condition. With easy access to the engine and other key components, users can perform routine checks and maintenance tasks without hassle.

In conclusion, the Yard Machines 570 stands out for its blend of power, efficiency, and user-friendly features. Whether tackling a small yard or maintaining larger spaces, it provides a reliable and effective solution for lawn care needs, combining modern technology with practical design. This mower is an excellent choice for those seeking reliable performance and ease of use in their outdoor maintenance routine.
Top Page Image Contents