Yard Machines 570 manual Operation, Gas And Oil Fill-Up, Starting Engine, Gasoline

Page 14

SECTION 8: OPERATION

Gas And Oil Fill-Up

Oil:

Only use high quality detergent oil rated with API service classification SF, SG or SH. Use SAE30 oil; do not use 10W40 oil.

Position the mower on level ground and clean area around oil fill plug.

Remove oil fill plug.See Figure 14. Pour recommended oil through the oil fill till full.

Install oil fill plug and tighten securely.

NOTE: Although multi-viscosity oils (5W30, 10W30, etc.) improve starting in cold weather, these multiviscosity oils will result in increased oil consumption when used above 32oF. Check the oil level more frequently to avoid possible engine damage from running low on oil.

Fill up gas here

Fill up oil here

FIGURE 14

Gasoline

WARNING: Never fill fuel tank indoors, or when engine is running or hot. Do not smoke when filling up the fuel tank.

Clean area around fuel cap. Remove cap. See Figure 14. Use a funnel to prevent spillage.

Pour approximately 1.5 quarts of fresh, regular grade, unleaded gasoline slowly to the fuel tank.

IMPORTANT: Never mix engine oil with gasoline.

Fill tank to 1/2” below the bottom of the filler neck. Wipe any fuel spillage. Do not fill fuel tank completely. Provide space for fuel expansion.

Starting Engine

WARNING: Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower.

Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.

Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug wire is fastened securely over the metal tip on the spark plug.

14

Image 14
Contents OPERATOR’S Manual Table of Contents Important Safe Operation Practices General OperationChildren Slope Gauge Removing Unit From Carton Finding Model NumberUnpacking Loose PartsHardware Pack Tools Required Setting UP MowerDisconnecting Spark Plug Attaching Lower HandleAttaching snap fitting Attaching Upper HandleAttaching Brake Cable Attaching Z FittingAttaching Blade Control Handle Attaching Starter Rope Attaching Chute DeflectorAttaching Rear Wheels Attaching WheelsAttaching front wheel Primer ControlsRecoil Starter Blade Control HandleStarting Engine OperationGas And Oil Fill-Up OilCleaning Mower MaintenanceAdjusting Cutting Height Stopping EngineLubrication Service & AdjustmentsEngine Maintenance Blade CareTo Replace Blade Replacing Rear FlapTo Remove Blade To Sharpen BladeMower Adjusting CarburetorOFF-SEASON Storage EngineTROUBLE-SHOOTING Guide Problem Possible Cause Corrective ActionYour Notes Shroud Chart Repair Parts Page MANUFACTURER’S Limited Warranty for Other Warranties

570 specifications

The Yard Machines 570 is a robust and versatile lawn mower designed for both residential and light commercial use. Known for its reliable performance, it offers several features tailored to meet the needs of homeowners and landscapers alike.

One of the standout features of the Yard Machines 570 is its powerful engine. Equipped with a reliable 140cc OHV engine, it provides the necessary torque and power to tackle even the toughest lawns. This engine is designed for easy starting, ensuring that users can get to work quickly without the frustration of a cumbersome ignition process.

Another significant characteristic of the Yard Machines 570 is its adjustable cutting height. With multiple height settings, users can customize the mowing experience to their specific lawn needs. This flexibility allows for optimal cutting, whether navigating through thick grass or achieving a perfectly manicured finish.

The design of the Yard Machines 570 is also noteworthy. Its low-profile design enhances maneuverability, allowing gardeners to navigate around obstacles such as trees and flower beds with ease. Additionally, the mower comes equipped with a 21-inch cutting deck, ensuring efficient coverage and reduced time spent mowing.

Technologically, the Yard Machines 570 integrates a reliable bagging system, enabling effective collection of grass clippings. This feature not only keeps the lawn tidy but also allows for easy disposal or composting of organic waste. For those who prefer a natural approach, the mower also supports side discharge, spreading clippings back onto the lawn for added fertilization.

Durability is another hallmark of the Yard Machines 570. Constructed with a sturdy steel frame and deck, it is designed to withstand the rigors of regular use. The wheels are built for stability and ease of movement, featuring a robust design that can handle various terrains.

Maintenance is straightforward with the Yard Machines 570, as it requires minimal effort to keep in optimal condition. With easy access to the engine and other key components, users can perform routine checks and maintenance tasks without hassle.

In conclusion, the Yard Machines 570 stands out for its blend of power, efficiency, and user-friendly features. Whether tackling a small yard or maintaining larger spaces, it provides a reliable and effective solution for lawn care needs, combining modern technology with practical design. This mower is an excellent choice for those seeking reliable performance and ease of use in their outdoor maintenance routine.