Filling the Fuel Tank, Check the Engine OIL Level

ENGLISHGB

5.Grass and leaf transport

Using dump cart 13-1979 (Standard) or 13-1988 (Maxi).

6.Fertiliser spreading

Using fertiliser spreader 13-1987. Can also be used for spreading grass seed.

7.Sand spreading

Using sand spreader 13-1975. Can also be used for spreading salt. Snow chains 13-1956 and wheel weights 13-1982 are recommended.

8.Weeding on gravel paths

Using front mounted hoe 13-1944 and rear mounted rake 13-1969.

9.Lawn edge trimming Using edge trimmer 13-1972.

10.Moss scarification

Using flail mower 13-1977 equipped with special moss scarifier 13-1986.

The maximum vertical load on the towing hitch must not exceed 100 N.

The maximum over-run load on the towing hitch from towed accessories must not exceed 500 N.

GENERAL

You can fill with fuel and check the oil level in the engine by removing the engine cover. You do this by lifting it upwards and backwards (fig 34).

NOTE that, to check the oil level on the Pro16- Pro18 models, you must remove the entire engine casing.

Do not use the machine without first fit- ting the engine casing, otherwise there is a risk of burn injuries or crushing ac- cidents.

FILLING THE FUEL TANK

Always use lead-free petrol. Never use oil-mixed petrol.

NOTE! Bear in mind that petrol is a perishable, do not purchase more petrol than can be used within 30 days.

Petrol is highly inflammable. Always store petrol in containers that are made specially for this purpose.

Fill or top up with petrol only outdoors, and never smoke when filling or top- ping up. Fill with petrol before starting the motor. Never remove the filler cap or fill with petrol while the motor is running or still warm.

CHECK THE ENGINE OIL LEVEL

On delivery the crankcase is filled with SAE 30 oil.

Check the oil level every time before using to ensure it is correct. The machine should be standing on level ground.

Wipe clean round the oil dipstick, remove it and wipe off. Push down the dipstick fully and screw it in.

Then unscrew it and pull it up again. Read off the oil level. Top up with oil to the “FULL” mark if the level comes below it (fig 7 - 8).

CHECKING THE TRANSMISSION

OIL LEVEL (President- Pro16 -

Pro18)

The transmission is filled with SAE 20W-50 oil when the machine is delivered from the factory,

Check the oil level every time before using to ensure it is correct. The machine should be standing on level ground.

President:

Unscrew the oil dipstick (fig 9). Read off the oil level. It should be within the xx markings.

Pro16-Pro18:

Read off the oil level in the reservoir (fig 10). It should be between the MAX and MIN marks.

If necessary, top up with SAE 20W-50 oil.

It is important that you observe clean- ness when handling oil for the transmis- sion. There must not be any particles of dirt in the system as dirt can easily cause total failure of the transmission.

SAFETY SYSTEM

This machine is equipped with a safety system that consists of:

-a switch on the gear box (only Classic)

-a switch at the brake pedal

-a switch in the seat mounting

-a switch at the power take-off engagement

PRO 18, PRO 16 specifications

Stiga PRO 16 and PRO 18 are elite-level table tennis blades that exemplify exceptional craftsmanship and cutting-edge technology, targeting both competitive players and serious enthusiasts. These blades are meticulously designed for players who seek balance, power, and control, integrating various innovative features that contribute to superior performance on the table.

The Stiga PRO 16 is particularly known for its lightweight design paired with a high degree of stiffness. This blade employs a unique combination of multiple layers of wood and advanced composite materials that enhance speed while maintaining excellent control. Its 16 mm thickness strikes a harmony between power and precision, allowing players to deliver fierce shots with ease. The PRO 18, on the other hand, is slightly thicker at 18 mm, providing a more substantial feel and increased power for aggressive playstyles. This thicker build enables players to generate greater spin, making it a favored choice for those who rely on heavy topspin and fast-paced gameplay.

Both blades feature the renowned Stiga “WAVE” technology, which optimizes the wood grain orientation to maximize speed and minimize vibrations. This technology not only enhances ball feel but also improves the racket's stability during intense rallies. Additionally, they come equipped with Stiga's proprietary “Hyper Bounce” technology, ensuring that players experience consistent rebound characteristics, enabling them to execute precise strokes without compromising power.

Another defining characteristic of the Stiga PRO 16 and PRO 18 is their ergonomic handle design. Both blades feature a well-shaped handle that fits comfortably in hand, allowing for extended playing periods without fatigue. Players can personalize their experience further by choosing between different handle types, such as the Straight, Flared, or Concave designs.

Moreover, both blades are compatible with a wide range of rubber surfaces, granting players the freedom to customize their setup according to their unique preferences. The combination of these features results in blades that not only cater to advanced techniques but also enhance overall playing experience.

In conclusion, the Stiga PRO 16 and PRO 18 represent the pinnacle of table tennis technology. Their high-quality materials, advanced technologies, and thoughtful design ensure players possess the necessary tools to take their game to new heights. These blades are not just products; they are a gateway to elevated performance on the table.