Shindaiwa X7502824801 manual Filling the fuel tank, Mixing Instructions, After use

Page 10

Handling Fuel

DANGER

Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may re-

sult.

•Use an approved fuel container.

•DO NOT smoke near fuel.

•DO NOT allow flames or sparks near fuel.

•Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.

•NEVER refuel a unit when the engine is HOT or RUNNING!

•DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.

•DO NOT overfill fuel tank. Wipe up spills immediately.

•Securely tighten fuel tank cap and close fuel container after refueling.

•Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.

•Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

1. Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of 2-stroke oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-

off containers to reduce fuel spillage.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccu-

pied building, away from sparks and flames.

After use

 

IMPORTANT!

• DO NOT store a unit with fuel in its tank. Leaks can

Stored two-stroke fuel may separate. ALWAYS

occur. Return unused fuel to an approved fuel storage

container.

shake fuel container thoroughly before each use.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS store gasoline in a container approved for flam-

■■ALWAYS stop the engine and allow it to cool before

mable liquids.

refueling.

■■ALWAYS inspect the unit for fuel leaks before each use.

■■ALWAYS Wipe all spilled fuel and move at least 3

During each refill, check that no fuel leaks from around

meters (10 feet) from the fueling point and source before

the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immediately.

starting.

Fuel leaks must be repaired before using the unit.

■■NEVER place flammable material close to the engine

■■ALWAYS move the unit at least 3 meters (10 feet) away

muffler.

■■NEVER operate the engine without the muffler and spark

from a fuel storage area or other readily flammable

materials before starting

arrester screen in place and in good working condition.

the engine.

■■FUEL IS HIGHLY FLAMMABLE.

 

1. Place the unit on a flat, level surface.

 

2. Clear any dirt or other debris from around the fuel filler cap.

Remove the fuel

 

CAUTION!

cap

 

Slowly remove the fuel cap only after stopping the engine

 

3. Remove the fuel cap, and fill the tank with clean, fresh fuel.

4. Reinstall the fuel filler cap and tighten firmly.Filling the fuel tank

5. Wipe away any spilled fuel before starting engine.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents T282 Trimmer Contents IntroductionStay Alert SafetyWork Safely Use Good JudgmentProperly Equipped Operator Safety LabelsBarefooted 15m Be Aware of the Working Environment50ft Emission Control Exhaust & Evaporative SpecificationsProduct Description EPA 2010 and Later and/or C.A.R.B. TierFront handle installation AssemblyPrior to Assembly Cutting Attachment ShieldAdjust Throttle Lever Free Play Install trimmer headMixing Fuel Fuel RequirementsAfter use Filling the fuel tankMixing Instructions Minimize the Risk of FireStarting the Engine Stopping the Engine When the Engine StartsStarting a Flooded Engine Cutting grass with a trimmer head Checking Unit ConditionOperation Trimmer head stylesEngine Operating Speeds MaintenanceGeneral maintenance Trimming and Mowing GrassDaily Maintenance Lubrication With cutting attachment installed on gear caseRemove and replace the filter element Muffler and spark arrester maintenance Cooling SystemIdle Speed Adjustment Carburetor AdjustmentAdjusting Engine Idle Engine Break-InWear Indicators Long Term StorageTroubleshooting Guide Engine is knocking Poor acceleration Engine stops abruptlyExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Servicing Information Parts/Serial Number

X7502824801 specifications

The Shindaiwa X7502824801 is a powerhouse in the realm of outdoor power equipment, particularly recognized for its outstanding performance and durability. Designed for both professional landscapers and passionate homeowners, this tool exemplifies the quality and innovation that Shindaiwa is renowned for.

One of the key features of the X7502824801 is its robust engine. It is equipped with a high-performance engine that delivers exceptional power while maintaining fuel efficiency. This is vital for users who demand both performance and cost-effectiveness over extended periods of use. The powerful engine ensures that even the most challenging tasks, such as heavy cutting, pruning, and trimming, are accomplished with ease.

Another significant characteristic of the X7502824801 is its lightweight design, which brings an advantage in maneuverability. This feature allows users to work for extended periods without experiencing fatigue, making it especially useful for professionals who rely on their equipment for long hours. The ergonomically designed handle further enhances user comfort, providing a secure grip that reduces vibration during operation.

In terms of technology, the Shindaiwa X7502824801 incorporates advanced features to improve overall efficiency. The unit includes an easy-start system, which minimizes the effort required to start the machine, enabling users to get to work quickly. This is particularly appreciated in commercial settings where time is of the essence.

Additionally, the X7502824801 is designed with low emissions in mind, aligning with modern environmental standards. Its engine technology ensures that it operates cleanly, contributing to a reduction in harmful emissions while maintaining robust performance. This makes it a suitable choice for environmentally conscious users.

The durability of the Shindaiwa X7502824801 cannot be overlooked. Built with high-quality materials, the unit is resistant to wear and tear, ensuring longevity even when subjected to rigorous use. Maintenance is also straightforward, with accessible components that simplify routine checks and repairs.

In summary, the Shindaiwa X7502824801 stands out in the outdoor power equipment market due to its combination of power, comfort, efficiency, and durability. Whether for commercial applications or residential use, this model offers users a reliable and high-performing solution that meets a wide range of landscaping needs. With the integration of cutting-edge technology and smart design, the X7502824801 is a notable investment for anyone serious about outdoor maintenance.
Top Page Image Contents