Shindaiwa X7502824801 manual Long Term Storage, Wear Indicators

Page 19

Loading Speed-Feed©Trimmer Line

1.Cut one piece of line to recommended length.

.080 (2.0 mm) dia. - 20’ (6 m)

.095 (2.4 mm) dia. - 20’ (6 m)

2.Align arrows on top of knob with openings in eyelets.

3.Insert one end of trimmer line into an eyelet, and push line equal distance through trimmer head.

4.Hold trimmer head while turning knob clockwise to wind line onto spool until about 5” (13 cm) of each line remains exposed.

Trimmer head is now fully loaded and ready for operation.

NOTE:

Trimmer head is pre-wound with .095" (2.4mm) Crossfire™ trimmer line.

IMPORTANT!

2

3

4

When the wear indicators located at the bottom of the Speed-Feed head are worn smooth, replacement of the cover or the entire Speed-Feed head is required.

Wear Indicators

Long Term Storage

Whenever the unit will not be used for 30 days or longer, use the following pro- cedures to prepare it for storage:

■■Clean external parts thoroughly and apply a light coating of oil to all metal surfaces.

■■Drain all the fuel from the carburetor and the fuel tank.

To do so:

1.Prime the primer bulb until no more fuel is passing through.

2.Start and run the engine until it stops running.

3.Repeat steps 1 and 2 until the engine will no longer start.

CAUTION!

Gasoline stored in the carbure-

tor for extended periods can cause hard starting, and could also lead to increased service and maintenance costs.

IMPORTANT!

All stored fuels should be stabi- lized with a fuel stabilizer such as STA-BIL™.

NOTE:

Damage resulting from stale or con- taminated fuel is not covered by the Shindaiwa warranty policy.

Wear Indicators

■■Remove the spark plug and pour about 1/4 oz. of engine oil into the cylinder through the spark plug hole. Slowly pull the recoil starter 2 or

3 times so oil will evenly coat the interior of the engine. Reinstall the spark plug.

■■Before storing the unit, repair or replace any worn or damaged parts.

■■Remove the air cleaner element from the carburetor and clean it thor- oughly with soap and water. Let dry and reassemble the element.

■■Store the unit in a clean, dust-free area.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents T282 Trimmer Introduction ContentsUse Good Judgment SafetyWork Safely Stay AlertProperly Equipped Operator Safety LabelsBarefooted 15m Be Aware of the Working Environment50ft EPA 2010 and Later and/or C.A.R.B. Tier SpecificationsProduct Description Emission Control Exhaust & EvaporativeCutting Attachment Shield AssemblyPrior to Assembly Front handle installationInstall trimmer head Adjust Throttle Lever Free PlayFuel Requirements Mixing FuelMinimize the Risk of Fire Filling the fuel tankMixing Instructions After useStarting the Engine Stopping the Engine When the Engine StartsStarting a Flooded Engine Trimmer head styles Checking Unit ConditionOperation Cutting grass with a trimmer headTrimming and Mowing Grass MaintenanceGeneral maintenance Engine Operating SpeedsDaily Maintenance Lubrication With cutting attachment installed on gear caseRemove and replace the filter element Cooling System Muffler and spark arrester maintenanceEngine Break-In Carburetor AdjustmentAdjusting Engine Idle Idle Speed AdjustmentLong Term Storage Wear IndicatorsTroubleshooting Guide Engine is knocking Engine stops abruptly Poor accelerationExceptions Purchased Repair Parts and Accessories 01/2010 Page Page Parts/Serial Number Servicing Information

X7502824801 specifications

The Shindaiwa X7502824801 is a powerhouse in the realm of outdoor power equipment, particularly recognized for its outstanding performance and durability. Designed for both professional landscapers and passionate homeowners, this tool exemplifies the quality and innovation that Shindaiwa is renowned for.

One of the key features of the X7502824801 is its robust engine. It is equipped with a high-performance engine that delivers exceptional power while maintaining fuel efficiency. This is vital for users who demand both performance and cost-effectiveness over extended periods of use. The powerful engine ensures that even the most challenging tasks, such as heavy cutting, pruning, and trimming, are accomplished with ease.

Another significant characteristic of the X7502824801 is its lightweight design, which brings an advantage in maneuverability. This feature allows users to work for extended periods without experiencing fatigue, making it especially useful for professionals who rely on their equipment for long hours. The ergonomically designed handle further enhances user comfort, providing a secure grip that reduces vibration during operation.

In terms of technology, the Shindaiwa X7502824801 incorporates advanced features to improve overall efficiency. The unit includes an easy-start system, which minimizes the effort required to start the machine, enabling users to get to work quickly. This is particularly appreciated in commercial settings where time is of the essence.

Additionally, the X7502824801 is designed with low emissions in mind, aligning with modern environmental standards. Its engine technology ensures that it operates cleanly, contributing to a reduction in harmful emissions while maintaining robust performance. This makes it a suitable choice for environmentally conscious users.

The durability of the Shindaiwa X7502824801 cannot be overlooked. Built with high-quality materials, the unit is resistant to wear and tear, ensuring longevity even when subjected to rigorous use. Maintenance is also straightforward, with accessible components that simplify routine checks and repairs.

In summary, the Shindaiwa X7502824801 stands out in the outdoor power equipment market due to its combination of power, comfort, efficiency, and durability. Whether for commercial applications or residential use, this model offers users a reliable and high-performing solution that meets a wide range of landscaping needs. With the integration of cutting-edge technology and smart design, the X7502824801 is a notable investment for anyone serious about outdoor maintenance.
Top Page Image Contents