Shindaiwa 62719-94310, LE231/EVC manual Introduction, Contents, General Safety Instructions

Introduction

The Shindaiwa 231-series of hand-held power tools has been designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety or durability.

Shindaiwa’s high-performance engines rep- resent the leading edge of 2-cycle engine technology, delivering exceptionally high power with remarkably low displacement and weight. As an owner/operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself!

IMPORTANT!

The information contained in this owner's/ operator's manual describes units available at the time of publication.

Shindaiwa Inc. reserves the right to make changes to products without prior notice, and without obligation to make alterations to units previously manufactured.

Contents	PAGE
Attention Statements	2
General Safety Instructions	2
Product Description	5
Specifications	5
Assembly	6
Engine Fuel	8
Starting the Engine	9
Stopping the Engine	9
Adjusting Engine Idle	10
Checking Unit Condition	10
Using a Hand Held Edger	10
Maintenance	11
Long Term Storage	14
Troubleshooting Guide	15
Emission System Warranty	17

Attention Statements

Throughout this manual are special “Attention Statements.”

WARNING!

A statement preceded by the trian- gular attention symbol and the word “WARNING” contains information that should be acted upon to prevent seri- ous bodily injury.

CAUTION!

A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent me- chanical damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that possesses special significance.

NOTE:

A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier.

Read and follow this operators manual. Failure to do so could result in serious injury.

Wear eye and hearing protection at all times during the operation of this unit.

Keep bystanders at least 50 feet

50 FEET

(15m) (15 m) away during operation.

Beware of thrown or ricocheted objects.

Keep feet away from blade. Rotating blade may cause injury.

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from your unit as well as to protect you and others from harm. These procedures are guidelines for safe opera- tion under most conditions, and are not intended to replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your 231-se- ries power tool, or if you do not understand something in this manual, your Shindaiwa dealer will be glad to assist you. You may also contact Shindaiwa Inc. at the address printed on the back of this Manual.

General Safety Instructions

Work Safely

Shindaiwa lawn edgers operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruc- tion to operate your unit!

WARNING!

Never make unauthorized attachment installations. Nor use attachments not approved by Shindaiwa for use on this product.

WARNING!

Use Good Judgment

ALWAYS wear eye protection to shield against thrown objects.

NEVER run the engine when transport- ing the unit.

NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause serious injury or death.

ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander.

ALWAYS stop the unit immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improp- erly installed parts or attachments.

ALWAYS keep the unit as clean as practical. Keep it free of loose vegeta- tion, mud, etc.

ALWAYS hold the unit firmly with both hands when cutting or trimming, and maintain control at all times.

ALWAYS keep the handles clean.

ALWAYS disconnect the spark plug wire before performing any maintenance work.