Shindaiwa 81188 manual Checking Unit Condition, Shoulder Strap C3410

Page 12

Checking Unit Condition

NEVER operate the unit with the cut- ting attachment shield or other protective devices removed!

WARNING!

A cutting attachment shield or other protective device is no guarantee of protection against ricochet. YOU MUST ALWAYS GUARD AGAINST FLYING DEBRIS!

Use only authorized Shindaiwa parts and accessories with your Shindaiwa trimmer.

Do not make modifications to this unit with- out written approval from Shindaiwa, Inc.

ALWAYS make sure the cutting attach- ment is properly installed and firmly tight- ened before operation.

NEVER use a cracked or warped cutting attachment: replace it with a serviceable one.

ALWAYS make sure the cutting attach- ment fits properly into the appropriate attachment holder. If a properly installed attachment vibrates, replace the attach- ment with new one and re-check.

ALWAYS stop the engine immediately and check for damage if you strike a for- eign object or if the unit becomes tangled. Do not operate with broken or damaged equipment.

NEVER allow the engine to run at high RPM without a load. Doing so could damage the engine.

NEVER operate a unit with worn or damaged fasteners or attachment holders.

Shoulder Strap C3410

IMPORTANT!

Adjust the shoulder strap so the shoulder pad rests comfortably on the off-side shoulder and the cutting path of the cutting attachment is parallel to the ground. Make sure all hooks and adjustment devices are secure.

WARNING!

 

Always wear a shoulder strap

 

or harness when operating this unit. Us-

 

ing a harness with a brushcutter allows

 

you to maintain proper control of the unit

 

and reduces fatigue during extended

 

operation.

Figure 23

Shoulder strap required for use with Brushcutters

Double Shoulder Harness (optional accessory)

Adjust the double shoulder harness straps so the shoulder pads rest comfortably on the shoulders and the cutting path of the blade is parallel to the ground. Make sure all hooks and adjusting devices are secure.

B45045Part number:

72451-17203

Cutting Grass—Units equipped with a trimmer head

Your Shindaiwa unit may be equipped with one of several Shindaiwa trimmer head models, each with features for specific applications and/or operational requirements.

NOTE:

For proper operation, always refer to the instructions accompanying the trimmer head being used. Available trimmer head styles include:

Semi-automatic. Trimmer line is indexed when the operator taps the trimmer head on the ground during operation.

Manual. The operator indexes line man- ually with the grass trimmer stopped.

Fixed. The operator must stop the unit and add new lengths of trimmer line manually.

Flail. This device, designed for clearing weeds and light brush, features three nylon blades attached to the head by pivots.

NOTE:

Additional hardware may be required to mount the Fixed Line or the Flail type trim- mer heads.

CAUTION!

Do not push the rotating line into trees, wire fences or any material that could tangle or break line ends.

Engine Operating Speeds

Operate the unit at full throttle while cut- ting grass.

CAUTION!

Operation of trimmer without a cutting attachment shield and using excessive line length can lead to premature clutch failure.

CAUTION!

Operation at low RPM can lead to premature clutch failure.

Hold the trimmer so the trimmer head is angled slightly into the area to be cut. To ensure maximum trimmer-line service life, cut only with the tip of the trimmer line. Cut grass by swinging the trimmer from left to right. Keep the trimmer head horizontal. See Figure 24.

Trimming and

CUTTING

Mowing Grass

PATH

 

RETURN

 

PATH

Figure 24

Edging

Tilt the handle about 100° to the left (from hori- zontal) and move forward, holding the trimmer verti- cally as shown in Figure 25.

Figure 25

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents C3410 Brushcutter C3410Contents Safety InstructionsIntroduction Properly Equipped Operator Always use the proper cutting tool for the jobSafety Labels Be Aware of the Working EnvironmentPrior to Assembly Product DescriptionSpecifications C3410 Assembly Install the Cutting Attachment Shield C3410Outer tube and loosely install Cutting Attachment ShieldAdjustments Handle Bar C3410 Install the handlebarAdjust Throttle Lever Free Play Installing a Trimmer Head ClockwiseInstalling a Blade Remove the hex wrenchMixing Fuel Starting the EngineFilling the Fuel Tank Examples of 501 mixing quantitiesAdjusting Engine Idle Cutting attachment may rotate when the engine is startedWhen the Engine Starts Idle Speed AdjustmentChecking Unit Condition Shoulder Strap C3410Cutting Grass-Units equipped with a trimmer head Using a Blade C3410 Operating Units with a BladeGeneral Maintenance Daily MaintenanceHour Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operation139/150-Hour Maintenance Spark Arrester Screen MaintenanceLong Term Storage Blade SharpeningShindaiwa Tornado Blade Multiple-tooth Circular BladeTroubleshooting Guide Additional Problems Emission System Warranty Statement Por administrada es garantía Esta Emisión de Sistema del Garantía de DeclaraciónContinuación Diagnostico Guia 19SPDiagnostico Guia Discos de Afilado Plazo Largo de AlmacenamientoMúltiples Dientes de Discos Tornado Shindaiwa DiscoGuardachispas Maya la de Mantenimiento Mantenimiento o horas 139/150 Cada32 figura la Consulte.motor del tapa la BalancínHoras 50 Cada Mantenimiento Horas 10/15 Cada MantenimientoPrincipal eje del estrias las Lubrique 15SPHoras 10 Cada Mantenimiento Diario MantenimientoGeneral Mantenimiento Cuchilla una con Unidades Operando C3410 Disco un UsandoCorte de Cabezal con Equipadas Máquinas Césped de Corte Unidad la de Condición la VerifiqueMotor del Mínima Marcha de Ajuste Motor del ParadaContinuación Motor del Arranque Mínima Marcha de AjusteCombustible De Tanque el LlenandoMotor del Arranque Combustible de MezclaCuchilla la Instalando Nylon de Cabezal del Instalación 8SPContinuación Ensamblaje Acelerador del holgura la Ajuste AjustesBarra tipo mango el Instale C3410 Mango 7SPEnsamblaje 6SPC3410 Especificaciones Producto del DescripciónEnsamblar de Antes Seguridad de Etiquetas Trabajo de Area del Alerta EstéEquipado Debidamente Operario El Seguridad de Instrucciones Limpios mangos los mantenga Siempre3SP Contenido Alerta MantengaseCuidado con Trabaje Desmalezadora

81188, C3410 specifications

The Shindaiwa C3410,81188 is a powerful and reliable brushcutter that has gained recognition among landscaping professionals and gardening enthusiasts alike. This innovative tool is designed to tackle heavy-duty cutting tasks with ease while ensuring user comfort and efficiency.

One of the standout features of the C3410,81188 is its robust two-stroke engine, which delivers an impressive amount of power relative to its compact size. The engine is engineered for high performance, ensuring that users can cut through dense brush, thick grass, and stubborn weeds without straining the equipment. This power, combined with its lightweight design, allows for extended use without causing fatigue.

The C3410,81188 incorporates advanced starting technologies, making it easier for users to start the machine quickly and effortlessly. The inclusion of an automatic choke feature streamlines the starting process, reducing the need for manual adjustments, and allowing for a smoother operation right from the first pull.

User comfort is a priority with the Shindaiwa C3410,81188. The ergonomic design of the handle provides excellent grip and control, while the anti-vibration system helps minimize fatigue during prolonged use. This is particularly beneficial for professionals who use the machine for hours on end. The adjustable handle also allows for customization to suit various user preferences and body types, enhancing the overall experience.

Moreover, the cutting attachments of the C3410,81188 are versatile and adaptable, enabling users to switch between different heads such as trimmers, blades, and saws. This versatility makes it an ideal tool for various landscaping tasks, from delicate trimming to heavy-duty brush clearing.

In addition to its technical features, the Shindaiwa C3410,81188 is built with durability in mind. Constructed from high-quality materials, the brushcutter is designed to withstand challenging conditions and frequent use. Its maintenance-friendly design further supports longevity, ensuring that users can easily access components for routine checks and servicing.

Overall, the Shindaiwa C3410,81188 is a feature-rich brushcutter that combines power, comfort, and durability. Whether for professional landscapers or avid gardeners, this tool stands out as a reliable solution for maintaining outdoor spaces efficiently and effectively.
Top Page Image Contents