Shindaiwa C3410, 81188 manual Emission System Warranty Statement

Page 20

Emission System Warranty Statement

Your Warranty Rights and

Obligations

The California Air Resources Board, the U.S. Environmental Protection Agency and Shindaiwa Kogyo Co., Ltd. are pleased to explain the emission control system warranty on your new small off-road (non-road) engine.

In California, new small off-road engines must be designed, built, and equipped to meet the State’s stringent anti-smog stan- dards. In other states, new 1997 and later non-road engines must meet the Federal EPA’s stringent anti-smog standards. Shindaiwa Kogyo Co., Ltd. must warrant the emission control system on your small off-road engine for the periods of time listed below, provided there has been no abuse, neglect, or improper maintenance of your small off-road engine.

Your engine emission control system includes parts such as the carburetor, the ignition system and, if equipped, the catalytic converter. These components are specifically listed below.

Where a warrantable condition exists, Shindaiwa Kogyo Co., Ltd. will repair your small off-road engine at no cost to you includ- ing diagnosis, parts, and labor.

Manufacturer’s Warranty

Coverage

When sold within the U.S., this engine’s emission control sys- tem is warranted for a period of two (2) years from the date this product is first delivered to the original retail purchaser.

During the warranty period, Shindaiwa Kogyo Co., Ltd. will, at their option, repair or replace any defective emission-related com- ponent on this engine. During the original Warranty Period, these Warranty Rights are automatically transferable to subsequent own- ers of this product.

What is Covered by this

Warranty

1.Carburetor Internal Components

Throttle Valve, Needle, Jet, Metering Diaphragm

2.Ignition System Components

Ignition Coil

Flywheel Rotor

3.Catalytic Converter (if originally equipped)

The emission control system for your particular Shindaiwa engine may also include certain related hoses

and connectors.

Owners Warranty

Responsibilities

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in this owners manual. Shindaiwa Kogyo Co., Ltd. recommends that you retain all receipts covering maintenance on your small off-road engine, but Shindaiwa Kogyo Co., Ltd. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine owner, you should be aware, however, that Shindaiwa Kogyo Co., Ltd. may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance, or unapproved modifica- tions.

You are responsible for presenting your small off-road engine to an authorized Shindaiwa Dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a Shindaiwa customer service representative at (503) 692-3070 or your local Shindaiwa Dealer.

Consequential Damages

In the event that other component parts of this product are damaged by the failure of a warranted part, Shindaiwa Kogyo Co., Ltd. will repair or replace such component parts at no charge to you.

What is Not Covered

Failures caused by abuse, neglect, or improper maintenance procedures.

Failures caused by the use of modified or non-approved parts or attachments.

This Warranty is Administered by:

Shindaiwa Inc.

11975 S.W. Herman Rd. Tualatin, OR 97062 (503) 692-3070

Shindaiwa Inc.

6-2-11 Ozuka-Nishi

11975 S.W. Herman Rd.

Asaminami-Ku, Hiroshima

Tualatin, Oregon 97062

731-3167, Japan

Telephone: 503 692-3070

Telephone: 81-82-849-2220

Fax:

503 692-6696

Fax:

81-82-849-2481

www.shindaiwa.com

Shindaiwa Kogyo Co., Ltd.

©2005 Shindaiwa, Inc.

Part Number 81188

Revision 11/05

Shindaiwa is a registered trademark of Shindaiwa, Inc.

Specifications subject to change without notice.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents C3410 Brushcutter C3410Introduction ContentsSafety Instructions Properly Equipped Operator Always use the proper cutting tool for the jobSafety Labels Be Aware of the Working EnvironmentSpecifications C3410 Prior to AssemblyProduct Description Assembly Install the Cutting Attachment Shield C3410Outer tube and loosely install Cutting Attachment ShieldAdjust Throttle Lever Free Play AdjustmentsHandle Bar C3410 Install the handlebar Installing a Trimmer Head ClockwiseInstalling a Blade Remove the hex wrenchMixing Fuel Starting the EngineFilling the Fuel Tank Examples of 501 mixing quantitiesAdjusting Engine Idle Cutting attachment may rotate when the engine is startedWhen the Engine Starts Idle Speed AdjustmentCutting Grass-Units equipped with a trimmer head Checking Unit ConditionShoulder Strap C3410 Using a Blade C3410 Operating Units with a BladeHour Maintenance General MaintenanceDaily Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operation139/150-Hour Maintenance Spark Arrester Screen MaintenanceLong Term Storage Blade SharpeningShindaiwa Tornado Blade Multiple-tooth Circular BladeTroubleshooting Guide Additional Problems Emission System Warranty Statement Por administrada es garantía Esta Emisión de Sistema del Garantía de DeclaraciónContinuación Diagnostico Guia 19SPDiagnostico Guia Discos de Afilado Plazo Largo de AlmacenamientoMúltiples Dientes de Discos Tornado Shindaiwa DiscoGuardachispas Maya la de Mantenimiento Mantenimiento o horas 139/150 Cada32 figura la Consulte.motor del tapa la BalancínHoras 50 Cada Mantenimiento Horas 10/15 Cada MantenimientoPrincipal eje del estrias las Lubrique 15SPGeneral Mantenimiento Horas 10 Cada MantenimientoDiario Mantenimiento Cuchilla una con Unidades Operando C3410 Disco un UsandoCorte de Cabezal con Equipadas Máquinas Césped de Corte Unidad la de Condición la VerifiqueMotor del Mínima Marcha de Ajuste Motor del ParadaContinuación Motor del Arranque Mínima Marcha de AjusteCombustible De Tanque el LlenandoMotor del Arranque Combustible de MezclaCuchilla la Instalando Nylon de Cabezal del Instalación 8SPContinuación Ensamblaje Acelerador del holgura la Ajuste AjustesBarra tipo mango el Instale C3410 Mango 7SPEnsamblaje 6SPEnsamblar de Antes C3410 EspecificacionesProducto del Descripción Seguridad de Etiquetas Trabajo de Area del Alerta Esté3SP Equipado Debidamente Operario El Seguridad de InstruccionesLimpios mangos los mantenga Siempre Cuidado con Trabaje ContenidoAlerta Mantengase Desmalezadora

81188, C3410 specifications

The Shindaiwa C3410,81188 is a powerful and reliable brushcutter that has gained recognition among landscaping professionals and gardening enthusiasts alike. This innovative tool is designed to tackle heavy-duty cutting tasks with ease while ensuring user comfort and efficiency.

One of the standout features of the C3410,81188 is its robust two-stroke engine, which delivers an impressive amount of power relative to its compact size. The engine is engineered for high performance, ensuring that users can cut through dense brush, thick grass, and stubborn weeds without straining the equipment. This power, combined with its lightweight design, allows for extended use without causing fatigue.

The C3410,81188 incorporates advanced starting technologies, making it easier for users to start the machine quickly and effortlessly. The inclusion of an automatic choke feature streamlines the starting process, reducing the need for manual adjustments, and allowing for a smoother operation right from the first pull.

User comfort is a priority with the Shindaiwa C3410,81188. The ergonomic design of the handle provides excellent grip and control, while the anti-vibration system helps minimize fatigue during prolonged use. This is particularly beneficial for professionals who use the machine for hours on end. The adjustable handle also allows for customization to suit various user preferences and body types, enhancing the overall experience.

Moreover, the cutting attachments of the C3410,81188 are versatile and adaptable, enabling users to switch between different heads such as trimmers, blades, and saws. This versatility makes it an ideal tool for various landscaping tasks, from delicate trimming to heavy-duty brush clearing.

In addition to its technical features, the Shindaiwa C3410,81188 is built with durability in mind. Constructed from high-quality materials, the brushcutter is designed to withstand challenging conditions and frequent use. Its maintenance-friendly design further supports longevity, ensuring that users can easily access components for routine checks and servicing.

Overall, the Shindaiwa C3410,81188 is a feature-rich brushcutter that combines power, comfort, and durability. Whether for professional landscapers or avid gardeners, this tool stands out as a reliable solution for maintaining outdoor spaces efficiently and effectively.
Top Page Image Contents