Shindaiwa C3410, 81188 manual Introduction, Contents, Safety Instructions

Page 2

Introduction

The Shindaiwa 3410 Series hand held power equipment has been designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety or durability.

Shindaiwa engines represent the leading edge of high-performance engine technol- ogy, delivering exceptionally high power with remarkably low displacement and weight. As an owner/operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself!

IMPORTANT!

The information contained in this owner’s/operator’s manual describes units available at the time of publication.

Shindaiwa Inc. reserves the right to make changes to products without prior notice, and without obligation to make alterations to units previously manufactured.

WARNING!

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Contents

 

 

PAGE

Attention Statements.

................................2

Safety Information

2

Safety Labels

4

Product Description

5

Specifications

5

Assembly

6

Adjustments

7

Engine Fuel

.10

Starting the Engine..................................10

Attention Statements

Throughout this manual are special “attention statements”.

WARNING!

A statement preceded by the triangular attention symbol and the word “WARNING” contains information that should be acted upon to prevent serious bodily injury.

CAUTION!

A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that possesses special significance.

NOTE:

A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier.

Read and follow this operators manual. Failure to do so could result in serious injury.

Wear eye and hearing protection at all times during the operation of this unit.

Keep bystanders

at least 50 feet (15 m) away during operation.

Beware of thrown or ricocheted objects.

Do not operate this unit with a blade unless the unit is equipped with a Shindaiwa-approved handlebar or barrier.

Always wear a harness when operating this unit with a blade. A harness is also recommended when using trimmer line.

If unit is used as a brushcutter, beware of blade thrust. A jammed blade can cause the unit to jerk suddenly and may cause the operator to lose control of the unit.

Safety Instructions

Work Safely

Shindaiwa trimmers operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruction to operate this unit!

WARNING!

Never make unauthorized attachment installations. Do not use attachments not approved by Shindaiwa for use on this unit.

Stay Alert

You must be physically and mentally fit to operate this unit safely.

WARNING!

Never operate power equipment of any kind if you are tired or if you are under the influence of alcohol, drugs, medication or any other substance that could affect your ability or judgement.

Stopping the Engine

11

Adjusting Engine Idle

11

Checking Unit Condition

12

Shoulder Strap

12

Cutting Grass with a Trimmer Head

12

Using a Blade

13

Maintenance

14

Blade Sharpening

17

Long Term Storage

17

Troubleshooting Guide

18

Emission System Warranty

20

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from this unit as well as to protect you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your 3410 series hand held power equipment, or if you do not understand something in this manual, your Shindaiwa dealer will be glad to assist you. You may also contact Shindaiwa Inc. at the address printed on the back of this Manual.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents C3410 Brushcutter C3410Introduction ContentsSafety Instructions Properly Equipped Operator Always use the proper cutting tool for the jobSafety Labels Be Aware of the Working EnvironmentSpecifications C3410 Prior to AssemblyProduct Description Outer tube and loosely install AssemblyInstall the Cutting Attachment Shield C3410 Cutting Attachment ShieldAdjust Throttle Lever Free Play AdjustmentsHandle Bar C3410 Install the handlebar Installing a Trimmer Head ClockwiseInstalling a Blade Remove the hex wrenchFilling the Fuel Tank Mixing FuelStarting the Engine Examples of 501 mixing quantitiesWhen the Engine Starts Adjusting Engine IdleCutting attachment may rotate when the engine is started Idle Speed AdjustmentCutting Grass-Units equipped with a trimmer head Checking Unit ConditionShoulder Strap C3410 Using a Blade C3410 Operating Units with a BladeHour Maintenance General MaintenanceDaily Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operation139/150-Hour Maintenance Spark Arrester Screen MaintenanceShindaiwa Tornado Blade Long Term StorageBlade Sharpening Multiple-tooth Circular BladeTroubleshooting Guide Additional Problems Emission System Warranty Statement Por administrada es garantía Esta Emisión de Sistema del Garantía de DeclaraciónContinuación Diagnostico Guia 19SPDiagnostico Guia Múltiples Dientes de Discos Discos de AfiladoPlazo Largo de Almacenamiento Tornado Shindaiwa Disco32 figura la Consulte.motor del tapa la Guardachispas Maya la de MantenimientoMantenimiento o horas 139/150 Cada BalancínPrincipal eje del estrias las Lubrique Horas 50 Cada MantenimientoHoras 10/15 Cada Mantenimiento 15SPGeneral Mantenimiento Horas 10 Cada MantenimientoDiario Mantenimiento Cuchilla una con Unidades Operando C3410 Disco un UsandoCorte de Cabezal con Equipadas Máquinas Césped de Corte Unidad la de Condición la VerifiqueContinuación Motor del Arranque Motor del Mínima Marcha de AjusteMotor del Parada Mínima Marcha de AjusteMotor del Arranque CombustibleDe Tanque el Llenando Combustible de MezclaCuchilla la Instalando Nylon de Cabezal del Instalación 8SPBarra tipo mango el Instale C3410 Mango Continuación EnsamblajeAcelerador del holgura la Ajuste Ajustes 7SPEnsamblaje 6SPEnsamblar de Antes C3410 EspecificacionesProducto del Descripción Seguridad de Etiquetas Trabajo de Area del Alerta Esté3SP Equipado Debidamente Operario El Seguridad de InstruccionesLimpios mangos los mantenga Siempre Cuidado con Trabaje ContenidoAlerta Mantengase Desmalezadora

81188, C3410 specifications

The Shindaiwa C3410,81188 is a powerful and reliable brushcutter that has gained recognition among landscaping professionals and gardening enthusiasts alike. This innovative tool is designed to tackle heavy-duty cutting tasks with ease while ensuring user comfort and efficiency.

One of the standout features of the C3410,81188 is its robust two-stroke engine, which delivers an impressive amount of power relative to its compact size. The engine is engineered for high performance, ensuring that users can cut through dense brush, thick grass, and stubborn weeds without straining the equipment. This power, combined with its lightweight design, allows for extended use without causing fatigue.

The C3410,81188 incorporates advanced starting technologies, making it easier for users to start the machine quickly and effortlessly. The inclusion of an automatic choke feature streamlines the starting process, reducing the need for manual adjustments, and allowing for a smoother operation right from the first pull.

User comfort is a priority with the Shindaiwa C3410,81188. The ergonomic design of the handle provides excellent grip and control, while the anti-vibration system helps minimize fatigue during prolonged use. This is particularly beneficial for professionals who use the machine for hours on end. The adjustable handle also allows for customization to suit various user preferences and body types, enhancing the overall experience.

Moreover, the cutting attachments of the C3410,81188 are versatile and adaptable, enabling users to switch between different heads such as trimmers, blades, and saws. This versatility makes it an ideal tool for various landscaping tasks, from delicate trimming to heavy-duty brush clearing.

In addition to its technical features, the Shindaiwa C3410,81188 is built with durability in mind. Constructed from high-quality materials, the brushcutter is designed to withstand challenging conditions and frequent use. Its maintenance-friendly design further supports longevity, ensuring that users can easily access components for routine checks and servicing.

Overall, the Shindaiwa C3410,81188 is a feature-rich brushcutter that combines power, comfort, and durability. Whether for professional landscapers or avid gardeners, this tool stands out as a reliable solution for maintaining outdoor spaces efficiently and effectively.
Top Page Image Contents