Shindaiwa C282, X7502825300 manual Hour maintenance, 10/15 hour maintenance

Page 16

Maintenance (continued)

10-hour maintenance

Perform more frequently in dusty or dirty conditions.

Remove the air cleaner filter. Clean or replace as necessary. To clean filter wash it thoroughly in soap and water. Let it dry before reinstalling the filter.

CAUTION!

Do not operate the unit if the air cleaner or filter is damaged, or if the filter is wet or water soaked.

10/15 hour maintenance

Remove and clean or replace the spark plug.

■■Clean the spark plug. Adjust electrode gap according to the values listed in the ”Specifications” section. If the spark plug must be replaced, use only the type recommended in ”Specifica- tions” or equivalent resistor type spark plug of the correct heat range.

CAUTION!

Before removing the spark plug, clean the area around the plug to prevent dirt and debris from getting into the engine’s internal parts.

Unscrew Fastener

Air Filter

Element

Remove and clean or

replace the element

0.6 mm

(0.024 inch)

Clean the spark plug and check the gap at the electrode.

50 hour maintenance

Every 50 hours of operation; more frequently in dusty conditions:

■■Remove and clean the cylinder cover and clean dirt and debris from the cylinder cooling fins.

Gearcase lubrication

■■Remove and clean the cylinder cover and clean grass and dirt from the cylinder fins.

■■Remove the cutting attachment, cut- ting attachment holder and gear- shaft collar. Remove the filler plug from the side of the gearcase and press new grease into the gearcase until old grease is pushed out. Use only lithium-base grease such as Shindaiwa Gearcase Lubricant or equivalent.

■■Lubricate mainshaft splines.

New

grease

Gear shaft

collar

Lubricate gearcase

Old

grease

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents C282 Brushcutter Contents IntroductionSafety Safety LabelsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAssembly Prior to AssemblyHandlebar Assembly Install the handlebar Emission Control Exhaust & EvaporativeSub-Shield when trimmer head is in use Adjust throttle lever free playCutting Attachment Shield Installing a Trimmer Head Installing Brushcutter BladeMixing Fuel Examples of 501 mixing quantitiesFilling the Fuel Tank Mixing InstructionsAfter use Slowly remove the fuel cap only after stopping the engineStarting the Engine When the Engine StartsNever start the engine from the operating position Stopping the Engine Checking Unit ConditionOperation Starting a Flooded EngineUsing a blade Cutting grass with a trimmer headEngine Operating Speeds Trimmer head stylesBlade Thrust General maintenanceBrushcutter Handlebar Maintenance Hour maintenance 10/15 hour maintenanceMuffler maintenance Remove and replace the fuel filter elementCarburetor Adjustment Blade SharpeningMultiple-tooth Circular Blade Engine Break-InIdle Speed Adjustment Adjusting Engine IdleLong Term Storage Troubleshooting Guide Engine is knocking Poor acceleration Engine stops abruptlyExceptions Purchased Repair Parts and Accessories 01/2010 Page Page T10011001001/T10011999999 Servicing InformationT09912001001/T09912999999

X7502825300, C282 specifications

The Shindaiwa C282 is a powerful and versatile brush cutter designed for professional landscapers and homeowners alike. Known for its reliability and performance, the C282 is equipped with features that make it a top choice for tackling tough vegetation with ease.

One of the standout features of the Shindaiwa C282 is its high-performance engine. The unit is powered by a 28.1cc two-stroke engine, which provides excellent power-to-weight ratios. This allows the user to efficiently manage demanding tasks without feeling weighed down. The engine is designed for reduced emissions, making it environmentally friendlier while still delivering robust performance.

The C282 incorporates the unique Shindaiwa Easy Start technology, which significantly reduces the effort needed to start the machine. This feature minimizes the frustration often associated with starting two-stroke engines, allowing users to get to work quickly and efficiently.

Another significant characteristic of the Shindaiwa C282 is its ergonomic design. The brush cutter comes with a comfortable, padded handle and a lightweight frame that enhances maneuverability during operation. The machine's balanced construction ensures less fatigue during extended use, making it easier for operators to tackle large areas of overgrown terrain.

The Shindaiwa C282 also features a durable cutting head, which can be easily replaced to accommodate different cutting needs. The option to use both blades and nylon line allows users to switch between cutting dense underbrush and lighter weeds as needed. This versatility makes the C282 an invaluable tool for any landscaping task.

Durability is another critical aspect of the C282's design. Constructed from high-quality materials, this brush cutter is built to withstand the rigors of professional use, prolonging its lifespan and ensuring consistent performance over time.

Ultimately, the Shindaiwa C282 brush cutter, marked by model number X7502825300, combines powerful technology, ergonomic comfort, and durability, making it a dependable choice for anyone looking to maintain their landscape. Whether you're a seasoned professional or a DIY enthusiast, the C282 provides the capabilities required to handle any brush cutting job efficiently. With its innovative features and robust design, the Shindaiwa C282 stands out in the competitive market of outdoor power equipment, delivering reliability to its users.
Top Page Image Contents