Shindaiwa C282, X7502825300 manual Properly Equipped Operator, Be Aware of the Working Environment

Page 4

Safety (continued)

The Properly Equipped Operator

Wear hearing protection devices and a

Always wear eye protection such as

broad-brimmed hat or helmet. A helmet

goggles or safety glasses to shield

is required when using a blade-equipped

against thrown objects.

brushcutter to clear small trees.

Always wear a harness when operating the unit .

 

Prolonged exposure to excessive noise

It adds comfort and helps ensure safety by limiting

is fatiguing and could lead to impaired

movement fore and aft. When the harness is

hearing.

adjusted properly, the unit should balance with the

 

cutting attachment parallel to the ground.

Wear close-fitting clothing to

Always operate with both hands

protect legs and arms. Gloves

firmly gripping the unit.

offer added protection and are

 

strongly recommended. Do not

When operating with a blade, make sure

wear clothing or jewelry that

the handle is positioned to provide you with

could get caught in machinery

maximum protection from contacting the

or underbrush. Secure long hair

blade. Always make sure the handlebar

so that it is above shoulder level.

is installed in accordance with the

NEVER wear shorts!

manufacturers instructions.

Long-term exposure to vibration

Always make sure the

appropriate cutting attachment

can damage your hands.

shield is correctly installed and

 

in good condition. Do not

Keep a proper footing and do not

operate the unit if the

cutting attachment shield

overreach. Maintain your balance at all

is missing, loose, or

times during operation.

broken.

 

Wear appropriate footwear (non-skid

Keep away from the rotating

trimmer line or blade at all

boots or shoes): do not wear open-

times, and never lift a moving

toed shoes or sandals. Never work

attachment above waist-high.

barefooted!

 

 

 

Be Aware of the Working Environment

 

Avoid long-term

operation in very hot or very cold weather.

Be extremely careful

of slippery terrain,

especially during rainy

weather.

Be constantly alert for objects and debris that could be thrown either from the rotating cutting attachment or bounced

from a hard surface.

Make sure bystanders or observers outside the 15 meter (50 feet) “danger zone” wear eye protection.

15METERS (50 FEET)

Always make sure

the appropriate

cutting attachment shield is correctly installed.

Reduce the risk of bystanders

being struck by flying debris. Make sure no one is within 15 meters (50 feet)— that’s about 16 paces of an operating attachment. Stop immediately if a child, pet, or person comes within a 15 meter (50 feet)radius. Outside this radius, there is still a risk of injury from thrown objects.

Do not operate the unit if the cutting attachment shield is missing, loose, or broken.

Beware of a coasting blade when brushcutting or edging. A coasting blade can injure while it continues to spin after the throttle trigger is released or after the engine is stopped.

ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander. When operating in rocky terrain or near electric wires or fences, use extreme caution to avoid contacting such items with the cutting attachment.

If contact is made with a hard object, stop the engine and inspect the cutting attachment for damage.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents C282 Brushcutter Contents IntroductionSafety Safety LabelsWork Safely Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionAssembly Prior to AssemblyHandlebar Assembly Install the handlebar Emission Control Exhaust & EvaporativeSub-Shield when trimmer head is in use Adjust throttle lever free playCutting Attachment Shield Installing a Trimmer Head Installing Brushcutter BladeMixing Fuel Examples of 501 mixing quantitiesFilling the Fuel Tank Mixing InstructionsAfter use Slowly remove the fuel cap only after stopping the engineStarting the Engine When the Engine StartsNever start the engine from the operating position Stopping the Engine Checking Unit ConditionOperation Starting a Flooded EngineUsing a blade Cutting grass with a trimmer headEngine Operating Speeds Trimmer head stylesBlade Thrust General maintenanceBrushcutter Handlebar Maintenance Hour maintenance 10/15 hour maintenanceMuffler maintenance Remove and replace the fuel filter elementCarburetor Adjustment Blade SharpeningMultiple-tooth Circular Blade Engine Break-InIdle Speed Adjustment Adjusting Engine IdleLong Term Storage Troubleshooting Guide Engine is knocking Poor acceleration Engine stops abruptlyExceptions Purchased Repair Parts and Accessories 01/2010 Page Page T10011001001/T10011999999 Servicing InformationT09912001001/T09912999999

X7502825300, C282 specifications

The Shindaiwa C282 is a powerful and versatile brush cutter designed for professional landscapers and homeowners alike. Known for its reliability and performance, the C282 is equipped with features that make it a top choice for tackling tough vegetation with ease.

One of the standout features of the Shindaiwa C282 is its high-performance engine. The unit is powered by a 28.1cc two-stroke engine, which provides excellent power-to-weight ratios. This allows the user to efficiently manage demanding tasks without feeling weighed down. The engine is designed for reduced emissions, making it environmentally friendlier while still delivering robust performance.

The C282 incorporates the unique Shindaiwa Easy Start technology, which significantly reduces the effort needed to start the machine. This feature minimizes the frustration often associated with starting two-stroke engines, allowing users to get to work quickly and efficiently.

Another significant characteristic of the Shindaiwa C282 is its ergonomic design. The brush cutter comes with a comfortable, padded handle and a lightweight frame that enhances maneuverability during operation. The machine's balanced construction ensures less fatigue during extended use, making it easier for operators to tackle large areas of overgrown terrain.

The Shindaiwa C282 also features a durable cutting head, which can be easily replaced to accommodate different cutting needs. The option to use both blades and nylon line allows users to switch between cutting dense underbrush and lighter weeds as needed. This versatility makes the C282 an invaluable tool for any landscaping task.

Durability is another critical aspect of the C282's design. Constructed from high-quality materials, this brush cutter is built to withstand the rigors of professional use, prolonging its lifespan and ensuring consistent performance over time.

Ultimately, the Shindaiwa C282 brush cutter, marked by model number X7502825300, combines powerful technology, ergonomic comfort, and durability, making it a dependable choice for anyone looking to maintain their landscape. Whether you're a seasoned professional or a DIY enthusiast, the C282 provides the capabilities required to handle any brush cutting job efficiently. With its innovative features and robust design, the Shindaiwa C282 stands out in the competitive market of outdoor power equipment, delivering reliability to its users.
Top Page Image Contents