Shindaiwa 81359 manual Introduction, Contents, Safety Instructions

Page 2

Introduction

The Shindaiwa 242 Series hand held power equipment has been designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety or durability.

Shindaiwa engines represent the leading edge of high-performance engine technol- ogy, delivering exceptionally high power with remarkably low displacement and weight. As an owner/operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself!

IMPORTANT!

The information contained in this owner’s/operator’s manual describes units available at the time of publication.

Shindaiwa Inc. reserves the right to make changes to products without prior notice, and without obligation to make al- terations to units previously manufactured.

WARNING!

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Contents

 

 

PAGE

Attention Statements

2

Safety Instructions

2

Safety Labels

4

Product Description

5

Specifications

5

Assembly

6

Adjustments

7

Installing a Trimmer Head

8

Installing a Blade

9

Mixing Fuel

.10

Starting the Engine..................................10

Stopping the Engine

11

Adjusting Engine Idle

11

Checking Unit Condition

12

Shoulder Strap

12

Cutting Grass with a Trimmer Head

12

Using a Blade

13

Maintenance

14

Long Term Storage

17

Blade Sharpening

17

Troubleshooting Guide

18

Emission System Warranty

20

Attention Statements

Throughout this manual are special “attention statements”.

WARNING!

A statement preceded by the triangular attention symbol and the word “WARNING” contains information that should be acted upon to prevent serious bodily injury.

CAUTION!

A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.

IMPORTANT!

A statement preceded by the word “IMPORTANT” is one that possesses special significance.

NOTE:

A statement preceded by the word “NOTE” contains information that is handy to know and may make your job easier.

Read and follow this operators manual. Failure to do so could result in serious injury.

Wear eye and hearing protection at all times during the operation of this unit.

Keep bystanders

at least 50 feet (15 m) away during operation.

Beware of thrown or ricocheted objects.

Do not operate this unit with a blade unless the unit is equipped with a Shindaiwa-approved handlebar or barrier.

Always wear a harness when operating this unit with a blade. A harness is also recommended when using trimmer line.

If unit is used as a brushcutter, beware of blade thrust. A jammed blade can cause the unit to jerk suddenly and may cause the operator to lose control of the unit.

IMPORTANT!

The operational procedures described in this manual are intended to help you get the most from this unit as well as to protect you and others from harm. These procedures are guidelines for safe operation under most conditions, and are not intended to replace any safety rules and/or laws that may be in force in your area. If you have questions regarding your 242 series hand held power equipment, or if you do not understand something in this manual, your Shindaiwa dealer will be glad to assist you. You may also contact Shindaiwa Inc. at the address printed on the back of this Manual.

Safety Instructions

Work Safely

Shindaiwa trimmers operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruction to operate this unit!

WARNING!

Never make unauthorized attachment installations. Do not use attachments not approved by Shindaiwa for use on this unit.

Stay Alert

You must be physically and mentally fit to operate this unit safely.

WARNING!

Never operate power equipment of any kind if you are tired or if you are under the influence of alcohol, drugs, medication or any other substance that could affect your ability or judgement.

WARNING!

Minimize the Risk of Fire

NEVER smoke or light fires near the engine.

ALWAYS stop the engine and allow it to cool before refueling. Avoid overfill- ing and wipe off any fuel that may have spilled.

ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

ALWAYS move the unit to a place well away from a fuel storage area or other readily flammable materials before starting the engine.

NEVER place flammable material close to the engine muffler.

NEVER operate the engine without the spark arrester screen in place.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents C242 Brushcutter Introduction ContentsSafety Instructions Properly Equipped Operator Always use the proper cutting tool for the jobSafety Labels Be Aware of the Working EnvironmentProduct Description Specifications C242Prior to Assembly Sub-Shield C242 AssemblyCutting Attachment Shield Adjust Throttle Lever Free Play AdjustmentsHandle Bar C242 Install the handlebar Installing a Trimmer Head With the gear case output shaft facingInstalling a Blade Both holders must be flat against the surface of the bladeStarting the Engine Mixing FuelFilling the Fuel Tank Examples of 501 mixing quantitiesWhen the Engine Starts Adjusting Engine IdleCutting attachment may rotate when the engine is started Idle Speed AdjustmentCutting Grass-Units equipped with a trimmer head Checking Unit ConditionShoulder Strap C242 Using a Blade C242 Operating Units with a BladeHour Maintenance General MaintenanceDaily Maintenance 10/15-Hour Maintenance Every 10 to 15 hours of operationWith an authorized Shindaiwa servicing DealerShindaiwa Tornado Blade Long Term StorageBlade Sharpening Multiple-tooth Circular BladeTroubleshooting Guide Engine does not StartAdditional Problems Emission System Warranty Statement Emisión de Sistema del Garantía de Declaración Continuación Diagnostico Guia Adicionales ProblemasDiagnostico Guia 18SPMúltiples Dientes de Discos Discos de AfiladoPlazo Largo de Almacenamiento Tornado Shindaiwa DiscoDistri o servicio de centro su con consulte Mantenimiento horas 135 CadaShindaiwa autorizado buidor Carbón, de excesiva acumulación nota SiHoras 50 Cada Mantenimiento Horas 10/15 Cada MantenimientoGeneral Mantenimiento Horas 10 Cada MantenimientoDiario Mantenimiento Cuchilla una con Unidades Operando C242 Disco un UsandoUnidad la de Condición la Verifique Corte deCabezal con Equipadas Máquinas Césped de Corte Motor del Parada Motor delMínima Marcha de Ajuste Continuación Motor del ArranqueCombustible de Mezcla Motor del ArranqueCombustible de Tanque el Llenando De proporciónCuchilla la Instalando 9SPNylon de Cabezal del Instalación C242 Mango Continuación EnsamblajeAcelerador del holgura la Ajuste Ajustes Ensamblaje Allen cabezaEnsamblar de Antes C242 EspecificacionesProducto del Descripción Trabajo de Area del Alerta Esté Seguridad de EtiquetasPíes Equipado Debidamente Operario El Seguridad de Instrucciones Limpios mangos los mantenga SiempreHumana reproducción la Nocivos efectos otros u congénitos ContenidoIncendios de Riesgo El Disminuya Alerta MantengaseC242 Desmalezadora

81359 specifications

The Shindaiwa 81359 is a powerful and efficient tool designed for landscaping professionals who seek performance and reliability. This multi-purpose piece of equipment excels in various tasks, including trimming, cutting, and clearing, thus providing an essential addition to any outdoor toolkit.

One of the primary features of the Shindaiwa 81359 is its robust engine. Equipped with a high-performance 25.4cc two-stroke engine, the unit delivers ample power to tackle even the most demanding jobs. This engine is designed for efficiency and durability, ensuring that it can withstand the rigors of daily use in professional environments.

The Shindaiwa 81359 also incorporates advanced technologies to enhance operator experience and productivity. The unit features advanced vibration dampening technology, which significantly reduces the amount of vibration transmitted to the user. This results in increased comfort during prolonged use, minimizing fatigue and allowing for more extended periods of operation without compromising performance.

Another notable characteristic of the Shindaiwa 81359 is its lightweight design. Weighing in at just under 10 pounds, the tool is easy to maneuver, making it suitable for various landscaping tasks. The well-balanced design further aids in reducing strain on the operator, making it an ideal choice for residential or commercial landscaping work.

The cutting capabilities of the Shindaiwa 81359 are impressive, with a user-friendly, easy-to-adjust cutting head that allows for quick changes between different trimmer heads or attachments. This versatility equips the operator to seamlessly shift between different tasks, whether edging, trimming, or clearing thick brush.

Moreover, the Shindaiwa 81359 prioritizes environmental consciousness with its low-emission engine design. This aspect is crucial in today’s eco-aware market, where reducing environmental impact is a priority for many professionals and their clients.

In summary, the Shindaiwa 81359 stands out for its powerful 25.4cc engine, advanced vibration dampening, lightweight, ergonomic design, and versatility in cutting options. Ideal for landscaping professionals, its combination of efficiency and user comfort makes it a top choice for tackling a wide range of outdoor tasks.
Top Page Image Contents