Shindaiwa 81359 manual Be Aware of the Working Environment, Safety Labels

Be Aware of the Working Environment

Avoid long-term	Make sure bystanders or observers outside the
operation in very hot or	50-foot “danger zone” wear eye protection.
very cold weather.

		50
	Reduce the risk of	FEET
	bystanders being struck
	by flying debris. Make
	sure no one is within 50	When operating in rocky terrain or near
	feet (15 meters)—that’s
		electric wires or fences, use extreme cau-
	about 16 paces—of an
		tion to avoid contacting such items with
	operating attachment.
		the cutting attachment.
Be extremely careful	Always make sure the
	appropriate cutting attachment
of slippery terrain,
	shield is correctly installed.
especially during
rainy weather.
	Be constantly alert for objects and debris that	If contact is made with a hard
		object, stop the engine and
	could be thrown either from the rotating cutting	inspect the cutting attachment
Figure 2	attachment or bounced from a hard surface.	for damage.
Safety Labels
	This label indicates the minimum
	distance between front handle and
	rear grip per ANSI B175.3.
		C242
		IMPORTANT!
		Safety and Operation Information
		Labels: Make sure all informa-
		tion labels are undamaged and
		readable. Immediately replace
		damaged or missing information
		labels. New labels are avail-
		able from your local authorized
		Shindaiwa dealer.
Figure 3